Synergy Manufacturing Heavy Duty Metal-on-Metal Tie Rod End

From $60.00

• Fully greasable sintered metal on metal bushing design
• Tie Rod end boot is made from silicone and polyurethane
• 7/8-18 UNF LH Thread
• Spring loaded bearing design keeps pressure on bearings
• Made in the U.S.A
• California Residents: WARNING

Dynomax Exhaust Super Turbo Kit Dual Cat-Back System

From $428.99

• Type Of System: Cat-Back Exhaust System
• Retains Catalytic Converter: Yes
• Type Of Material: Aluminized Steel
• Muffler Included: Yes
• Muffler Type: Straight Through
• Muffler Material: Stainless Steel
• Mounting: Includes New Hangers
• California Residents: WARNING

Synergy Manufacturing Limit Straps

From $25.00

• Limit Straps
• 8" up to 20" inch Lengths Hole to Hole
• Plated end fittings are made from tough 4130 steel and have 1/2" hole
• U.S. made 1.75" nylon webbing with a 7000 lb. rating and superior flexibility
• Quad wrap (ultra strength)
• Eyelets have an integrated deflector clip to minimize abrasion
• Sold individually
• Made in the USA
• California Residents: WARNING

Dynomax Exhaust Ultra Flo Welded Cat-Back System

From $354.99

• Type Of System: Turbo-Back Exhaust System
• Tube Size: 4 in.
• Type Of Material: Stainless Steel
• Exhaust Tip: Stainless Steel
• Muffler Included: Yes
• Muffler Type: Straight Through
• Muffler Material: Stainless Steel
• Mounting: Includes New Hangers
• California Residents: WARNING

Synergy Manufacturing Radius Axle Link Brackets

From $1,000.00

• Synergy Manufacturing Radius Axle Link Brackets are designed to be used on an axle housing with a 3" diameter
• The link brackets are laser cut and CNC bent from 1/4" carbon steel
• The heavy duty 3 sided construction provides for a VERY rigid bracket and is designed to be used with any of our large rod ends with our high misalignment spacers & all of our rebuildable spherical bearing assemblies
• California Residents: WARNING

Dynomax Exhaust Ultra Flo SS Kit Cat-Back System

From $326.99

• Cat-Back System
• 2.5 in. System
• Incl. Intermediate Pipe
• Ultra Flo Mufflers SS/Welded
• Tail Pipe
• Clamps
• California Residents: WARNING

Synergy Manufacturing Front Long Arm Lower Control Arm

From $575.00

Synergy Manufacturing Rear Stretch Bracket Kit

From $1,480.00

• Synergy Manufacturing Rear Stretch Bracket Kit allows 2 Door JK's to be stretched with the Synergy 8 inch stretch kit while retaining the factory style coil spring and shock setup
• The Rear Stretch Bracket Kit Relocates upper coil spring mounts and upper shock mounts back 8 inches
• The Synergy Manufacturing Rear Stretch Bracket Kit is designed to be used in conjunction with Synergy 8032 rear 8 inch stretch brackets and long arms
• California Residents: WARNING

Dynomax Exhaust Single System Intermediate Pipe

From $102.99

• Single System
• Intermediate Pipe
• California Residents: WARNING

Dynomax Exhaust Evolution Competition System Exhaust System

From $326.99

• Stainless steel Ultra Flo polished muffler
• 2.5 inch mandrel bent stainless steel tubing
• 2 stainless steel 2.5 inch band clamps
• California Residents: WARNING

Synergy Lift Coil Springs

From $260.00

• Lift coil springs
• Synergy coils offer excellent off road performance while preserving ride quality
• Progressively wound
• keeps spring from coming unbound at suspension droop
• Progressively wound spring eliminates annoying spring clanking found on most suspension kits
• Feature frequency balanced and tuned spring rates to maximize suspension performance on and off road
• Suspension components feature an abrasive-resistant black powder coat finish for maximum durability and corrosion resistance
• Springs are designed to give the advertised amount of lift with use of aftermarket front bumpers & winches
• Sold in a pair
• California Residents: WARNING

Powermaster Racing Alternators

From $188.99

• Racing Alternator
• California Residents: WARNING

DynoMax Exhaust Clamps

From $21.99

• Replacment Exhaust Clamp
• California Residents: WARNING

DynoMax Stainless Glasspack Mufflers

From $163.99

• Universal
• Steel
• Red
• California Residents: WARNING

Synergy Manufacturing Axle Trusses

From $200.00

• Open top for easy upper link installation
• Rigid, boxed design made from 3/16" laser cut steel plate
• Designed to be used for 4 link suspensions
• Fits most differentials, D35, 44, 60, Ford 8.8", 9.0" & Chevy 14 bolt housings
• Link mount brackets are angled at 50 degrees apart from each other
• California Residents: WARNING

DynoMax Super Turbo Performance Mufflers

From $100.99

• Type Of Muffler: Turbo Style
• Muffler Material: Aluminized
• California Residents: WARNING

Synergy Manufacturing Control Arm Cam Bolt Kit

From $45.00

• Synergy 9/16" Control Arm Cam Bolt Kit
• Cam bolts are manufactured from high carbon heat treated steel
• All included components are zinc plated for maximum corrosion resistance
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Cam bolt offers 1/2" adjustment in either direction
• The bolt will work on a mounting width of 2.25 - 3"
• California Residents: WARNING

Synergy Manufacturing Side Plate Mounting Kit (Arms Only)

From $75.00

• (2) Side Plate Mounting Arms only
• Jeep JK, 4 Door
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Rear Track Bar Brackets

From $100.00

• Bracket raises the vehicle's axle side track bar mount
• The vehicle's rollcenter is raised, reducing body roll and dramatically improving overall handling
• Special bolt on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

DynoMax Mega Clamp Lap Joints

From $12.99

• Universal
• Stainless steel
• California Residents: WARNING

Synergy Manufacturing Axle Bracket Kit

From $181.99

• Front and Rear applications
• Various mounts included
• Made in the USA
• California Residents: WARNING

DynoMax Heavy Duty Exhaust U-Bolt Clamps

From $2.99

• Universal
• Mild steel
• thick u-bolt
• California Residents: WARNING

Synergy Manufacturing Double Adjuster Tube Adapter

From $55.00

• Made from solid stock 1018 Steel
• Adapters Include: (1) Weld on Tube Adapter with Pinch Bolt Slit and Tubes, (1) Zinc Plated Double Adjuster Sleeve to be used with a Thread Shank Rod End, and (1) Pinch Bolt Hardware
• Welding required
• Made in the U.S.A
• California Residents: WARNING

DynoMax Thrush Welded Mufflers

From $43.99

• Universal welded muffler
• 100% aluminized
• Deep tone
• California Residents: WARNING