Synergy Manufacturing Adjustable Steering Column

From $15.00

• Allows for easy adjustment of steering column
• Laser cut from 3/16 inch steel
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Heavy Duty Metal-on-Metal Tie Rod End

From $60.00

• Fully greasable sintered metal on metal bushing design
• Tie Rod end boot is made from silicone and polyurethane
• 7/8-18 UNF LH Thread
• Spring loaded bearing design keeps pressure on bearings
• Made in the U.S.A
• California Residents: WARNING

Extang eMax Tonno Tonneau Cover

From $408.99

• eMAX is the only soft-folding cover that folds up at the front of the truck bed to offer access to 100% of the bed interior. It installs in minutes, and whether it's open to full capacity or closed, remains hassle free and good looking. eMAX uses patented Secure Shut latching system to keep the cover steady and cargo protected. This cover features superior components: Speed & Safety Klamps, MaxHinges, WeatherTuff Seals and I-beams bows. eMAX is proudly made in the USA with the best materials and attention to detail. We back our work with our Maximum Strength Lifetime Warranty.
• California Residents: WARNING

Synergy Manufacturing Limit Straps

From $25.00

• Limit Straps
• 8" up to 20" inch Lengths Hole to Hole
• Plated end fittings are made from tough 4130 steel and have 1/2" hole
• U.S. made 1.75" nylon webbing with a 7000 lb. rating and superior flexibility
• Quad wrap (ultra strength)
• Eyelets have an integrated deflector clip to minimize abrasion
• Sold individually
• Made in the USA
• California Residents: WARNING

Extang BlackMax Tonneau Cover

From $269.00

• Exclusive Black frame and All-Climate Design That Is 4-Way Adjustable
• Snaps Along Cab Rail Allow Quick And Easy Access
• No Drilling
• No Damage
• SpringLock+ Bows-Easy To Install
• Never Fall Off
• 1-Finger Removal Of Tail Rail w/LeverLock+ System
• SnapStopper+ Keeps Snaps On Rail When Rolled Up
• Fiberglass Reinforced Nylon Snaps
• MaxCare Warranty
• 10 Year Tarp
• Lifetime Frame.
• California Residents: WARNING

Synergy Manufacturing Radius Axle Link Brackets

From $1,000.00

• Synergy Manufacturing Radius Axle Link Brackets are designed to be used on an axle housing with a 3" diameter
• The link brackets are laser cut and CNC bent from 1/4" carbon steel
• The heavy duty 3 sided construction provides for a VERY rigid bracket and is designed to be used with any of our large rod ends with our high misalignment spacers & all of our rebuildable spherical bearing assemblies
• California Residents: WARNING

Extang Trifecta Signature Tonneau Cover

From $479.99

• The Trifecta Signature Series with rich looking vinyl-backed black canvas. Maximum Strength Warranty. Extang engineered tri-fold style tonneau cover. Fast, easy, no assembly required. No tools. Extang engineered with precision. 45?? steel corner brackets, commercial grade rails and I-Beam style Monster Bows provide unparalleled strength. SafetyKlamps: Extremely strong glass-filled nylon construction, will never break. Secure cab section by hand tightening thread clamps with built-in heavy-duty handle. SpeedKlamps: Rear tail section clamps operate with spring action handle for instant fasten and release. Clamp conveniently stows away inside rail when not in use MaxHinges: Ultra-strong, rugged, double pivot design made of durable glass-filled nylon and feature protective padding. Heavy-duty luggage style Hold-Tite fasteners secure the tonneau in the open position at the cab. Provide quick and easy storage when hauling large cargo.
• California Residents: WARNING

Synergy Manufacturing Front Long Arm Lower Control Arm

From $575.00

Synergy Manufacturing Rear Coil Wedges

From $30.00

• Polyurethane Rear Coil Wedges
• Keeps rear springs from bowing irregularly when suspension lifts are used
• Fixes the common problem of the rear springs rubbing the rear trackbar/trackbar bracket when aftermarket CV driveshafts are used
• Corrects the rear axle mount spring perch angle when aftermarket CV driveshafts are used
• Sold As A Pair
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Rear Stretch Bracket Kit

From $1,480.00

• Synergy Manufacturing Rear Stretch Bracket Kit allows 2 Door JK's to be stretched with the Synergy 8 inch stretch kit while retaining the factory style coil spring and shock setup
• The Rear Stretch Bracket Kit Relocates upper coil spring mounts and upper shock mounts back 8 inches
• The Synergy Manufacturing Rear Stretch Bracket Kit is designed to be used in conjunction with Synergy 8032 rear 8 inch stretch brackets and long arms
• California Residents: WARNING

Synergy Manufacturing Front Sway Bar Links

From $115.00

• Sway Bar Links
• Front
• 100% bolt on components
• Made from 11/16" solid 1018 steel and are clear zinc plated for maximum corrosion resistance
• Will Sold as a pair
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing FOX/Synergy Steering Stabilizer Relocation Kit

From $300.00

• Manufactured from high strength 3/16 inch steel
• Grade 8 Hardware
• Powdercoated for corrosion resistance
• Bolt on components
• Fits Right Hand Drive Only
• Made in the U.S.A
• California Residents: WARNING

Synergy Lift Coil Springs

From $260.00

• Lift coil springs
• Synergy coils offer excellent off road performance while preserving ride quality
• Progressively wound
• keeps spring from coming unbound at suspension droop
• Progressively wound spring eliminates annoying spring clanking found on most suspension kits
• Feature frequency balanced and tuned spring rates to maximize suspension performance on and off road
• Suspension components feature an abrasive-resistant black powder coat finish for maximum durability and corrosion resistance
• Springs are designed to give the advertised amount of lift with use of aftermarket front bumpers & winches
• Sold in a pair
• California Residents: WARNING

Synergy Manufacturing Axle Trusses

From $200.00

• Open top for easy upper link installation
• Rigid, boxed design made from 3/16" laser cut steel plate
• Designed to be used for 4 link suspensions
• Fits most differentials, D35, 44, 60, Ford 8.8", 9.0" & Chevy 14 bolt housings
• Link mount brackets are angled at 50 degrees apart from each other
• California Residents: WARNING

Extang Express Tonno Tonneau Cover

From $395.99

• Roll Top Style Easily Installs In Minutes and Improve Gas Mileage By Ten Percent. No Drilling and No Damage Easy Access To Bed And Cargo One Finger Quick Release Levers At Tail and Cab and Aggressive High Peel Strength Velcro. Tarp And Bows Roll Up Together In One Step. These tonneaus have the MaxCare Warranty 10 Year Tarp and lifttime on the frame.
• California Residents: WARNING

Synergy Manufacturing Control Arm Cam Bolt Kit

From $45.00

• Synergy 9/16" Control Arm Cam Bolt Kit
• Cam bolts are manufactured from high carbon heat treated steel
• All included components are zinc plated for maximum corrosion resistance
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Cam bolt offers 1/2" adjustment in either direction
• The bolt will work on a mounting width of 2.25 - 3"
• California Residents: WARNING

Synergy Manufacturing Side Plate Mounting Kit (Arms Only)

From $75.00

• (2) Side Plate Mounting Arms only
• Jeep JK, 4 Door
• Made in the USA
• California Residents: WARNING

Synergy Tie Rod Ends

From $60.00

• Outperforms the factory and all other aftermarket style tie rod ends by offering a larger shank with no stress riser (doesnt neck down at base) and elimination of the nylon ball race.
• California Residents: WARNING

Synergy Manufacturing Rear Track Bar Brackets

From $100.00

• Bracket raises the vehicle's axle side track bar mount
• The vehicle's rollcenter is raised, reducing body roll and dramatically improving overall handling
• Special bolt on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Synergy Manufacturing Axle Bracket Kit

From $175.00

• Front and Rear applications
• Various mounts included
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Double Adjuster Tube Adapter

From $55.00

• Made from solid stock 1018 Steel
• Adapters Include: (1) Weld on Tube Adapter with Pinch Bolt Slit and Tubes, (1) Zinc Plated Double Adjuster Sleeve to be used with a Thread Shank Rod End, and (1) Pinch Bolt Hardware
• Welding required
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Rear Track Bar Bracket Braces

From $160.00

• Bracket designed to distribute the increased load the frame side track bar bracket encounters
• Added track bar bracket thickness prevents the track bar bolt from ovalizing out the stock mount
• Bolt on fix for those who already have an ovalized track bar bracket bolt hole
• Laser cut and CNC bent from 3/16" high strength steel
• California Residents: WARNING

Synergy Track Bar Bushings

From $30.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Control Arms

From $1,110.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING