Rhino-Rack Jeep Overlanding Kit - ROLJ1

• JEEP Wrangler JK 4dr 4WD Hard Top 02/11 to 03/19
• JEEP Wrangler JL 4dr 4WD Hard Top 04/19 On
• JEEP Wrangler JL 2dr 4WD Hard Top 04/19 On
• JEEP Gladiator JT 4dr Ute 06/20 On
• 100% load capacity in all conditions
• Utilises Pioneer LT tray to minimise system weight
• DIY friendly, easy to follow instructions
• 45 minute, no drill, non-invasive installation
• Durability tested to ensure it is suitable for overlanding and off-road use
• Compatible for Jeep Wrangler JK and JL, and Gladiator JT variants
• California Residents: WARNING
+ View More Specs - View Less Specs

DV8 Off-Road Full Length Roof Rack - RRJK-03

• 07-18 Jeep Wrangler JK 4 Door hard top models ONLY
• 300 LBS load capacity
• Mounts directly to rain gutters
• Can support a full size roof top tent
• Tie down points on all side
• Accessory Mounting Points on all sides
• No drilling required
• California Residents: WARNING
+ View More Specs - View Less Specs

DV8 OffRoad Half Length Roof Rack - RRJK-04

• 07-18 Jeep Wrangler JK 4 Door hard top models ONLY
• 200 lb Capacity Evenly Distributed
• Mounts Directly to Rain Gutters
• Freedom Hard Top Panel Can be Removed/Replaced with Rack Installed
• Tie Down Points on all Sides
• Accessory Mounting Points Atop Each Side Rail
• Micro-Texture Black Powder Coat Finish
• No Drilling Required
• Bolt-On Installation
• California Residents: WARNING
+ View More Specs - View Less Specs

Warrior JK Renegade Roof Rack System - 885

• Fitment: Direct Fit
• 07-18 Wrangler JK, 4-Door
• Black powder coat finish
• Split and pivot design for easy top access
• No-drill installation
• Simple bolt on installation
• California Residents: WARNING
+ View More Specs - View Less Specs

Warrior Platform Roof Rack - 10905

• Fitment: Direct Fit
• 4-door models
• 100% US made
• Easy installation and does not require drilling or vehicle modifications
• Rain Gutter mounts attach seamlessly to rain gutters
• Easily removable for long or short term installations
• Perfect for a Roof Top Tent
• Includes low profile Air Dam to reduce wind noise on the highway
• Welded one-piece platform for added strength and durability
• Constructed using 11-gauge steel with 1-1/4" round tube and 1" square crossbars
• Most Yakima and Thule universal style mounts are compatible with the 1" cross bars
• Compatible with Warrior accessories including: Quicklatch Axe/Shovel Mount, MOD box, Hi-Lift Jack Mount, No-Drill Spare Tire Mount and Awning Brackets
• Installed rack size: Length 57.5", Width 51.25", Height: 4.25"
• California Residents: WARNING
+ View More Specs - View Less Specs

Warrior Full Length Platform Roof Rack with Rain Gutter Mounts - 10908

• Fitment: Direct Fit
• Wrangler JL, 4-Door
• May not be compatible with 2021 Rubicon 392 or 4Xe models
• 100% US made
• Installed Rack size: Length 89.5", Width 51.25", Height: 4.25"
• 600lb static load capacity
• 400lb on road capacity
• 200lb off road capacity
• Warrior does not recommend hardcore rock crawling or any other hardcore off road activities with ANY weight on the roof of your vehicle
• Easy installation and does not require drilling or vehicle modifications
• Rain Gutter Mounts attach seamlessly to rain gutters and are easily removable for long or short term installations
• Perfect for a Roof Top Tent
• Includes low profile Air Dam to reduce wind noise on the highway
• Welded one-piece platform for added strength and durability
• Constructed using 11-gauge steel with 1-1/4" round tube and 1" square crossbars
• Most universal style mounts are compatible with the 1" cross bars
• Compatible with Warrior Platform Accessories including QuickLatch Mounts, MOD Box, Platform Off-Road Jack Mount, No-Drill Spare Tire Mount and Awning Brackets
• California Residents: WARNING
+ View More Specs - View Less Specs

Warrior Platform Roof Rack System - 10913

• 96-02 Toyota 4Runner
• 100% US made
• The Platform is 57-1/2" long and 39-1/4" wide
• Bolt-on design allows for easy installation
• Does not require any drilling or permanent vehicle modification
• Vehicle-specific mounting system for a simple, no hasle installation
• Perfect for a Roof Top Tent
• Compatible with Warrior Platform Accessories including QuickLatch Mounts, MOD Box, Platform Off-Road Jack Mount, No-Drill Spare Tire Mount and Awning Brackets
• Includes low profile Air Dam to reduce wind noise on the highway
• Does not interfere with OEM sunroof or 'Sharkfin' antenna
• Constructed with 1-1/4" round tube and 1" square crossbars
• Most universal style mounts are compatible with the 1" square bars
• Warrior Recommends not exceeding the weight limits
• Stationary: 600 lbs
• On-Road: 400 lbs
• Off-Road: 150 lbs
• California Residents: WARNING
+ View More Specs - View Less Specs

Warrior Platform Roof Rack System - 10915

• Fitment: Direct Fit
• 100% US made
• Bolt on design allows for easy installation and does not require any drilling or permanent vehicle modification
• Perfect for a Roof Top Tent
• Compatible with Warrior Platform Accessories including: QuickLatch Mounts, MOD Box, Platform Hi-Lift Mount, No-Drill Spare Tire Mount and Awning Brackets
• Includes low profile Air Dam to reduce wind noise on the highway
• Does not interfere with OEM sunroof or 'Sharkfin' antenna
• Constructed with 1-1/4" round tube and 1" square crossbars
• Most universal style mounts are compatible with the 1" square bars
• California Residents: WARNING
+ View More Specs - View Less Specs

Warrior Platform Roof Rack - 10917

• Fitment: Direct Fit
• 03-09 Lexus GX470
• 100% designed, manufactured, and welded in the USA
• Easy, bolt-on installation using the existing roof track mounting bolts
• Manufactured using 1-1/4" round tube and 1" square cross bars
• Cross bars will accept most Yakima and Thule universal mounts
• Ideal for a roof top tent
• Warrior recommends not exceeding the following load capacities: Stationary: 600lbs., On-Road: 400lbs. and Off-Road: 150lbs.
• Built to accept Warrior's full line of accessories including: QuickLatch Off-Road Jack Mount, QuickLatch Shovel / Axe Mount, MOD Box, and No-Drill Spare Tire Mount
+ View More Specs - View Less Specs

Warrior Platform Roof Rack - 10962

• 10-14 Subaru Outback
• 100% designed, manufactured, and welded in the USA
• Easy, bolt-on installation using the existing roof track mounting bolts
• Manufactured using 1-1/4" round tube and 1" square cross bars
• Cross bars will accept most Yakima and Thule universal mounts
• Ideal for a roof top tent
• Built to accept Warrior's full line of accessories including: QuickLatch Off-Road Jack Mount, QuickLatch Shovel / Axe Mount, MOD Box, and No-Drill Spare Tire Mount
+ View More Specs - View Less Specs

Warrior Mod Rack with Rails - 10984

• Fitment: Direct Fit
• Powder coat black
• Soft and Hard Top compatible
• Hard Top can be removed without unlatching the included platform
• Freedom panels are accessible and removable
• Side rail accessory mounting system for configurable accessory management
• Latch-style release for platform removal
• Integrated front Air Dam improves aerodynamic efficiency, provides a large surface for LED Light mounting, and greatly reduces wind noise/vibration
• No drilling or cutting required for installation
• California Residents: WARNING
+ View More Specs - View Less Specs

Warrior Platform Half Rack - 3830

• Fitment: Direct Fit
• Constructed from 11 gauge steel
• Sits 3 inch lower than factory rack
• Uses factory mounting points and can hold up to 750 lbs.
• Measures 60 inch long, 53 inch wide, and 5 inch high
• California Residents: WARNING
+ View More Specs - View Less Specs

Warrior Platform Roof Rack - 4860

• Fitment: Direct Fit
• Manufactured using 1-1/4? round tube and 1? square cross bars
• Easy, bolt-on installation using the existing roof track mounting bolts
• Ideal for a roof top tent
• California Residents: WARNING

ARB BASE Rack Starter Kit - 1780200K1

• Eye Bolt Tie Downs supplied as a set of four, are comprised of forged steel eye nuts and powder-coated aluminum blocks, they provide 440lb lashing capacity
• Eye Bolt Tie Downs stay securely on the BASE Rack when not in use
• Spring Loaded Tie Downs supplied as a set of two, are made from stainless steel, they provide 440lb lashing capacity and allow simple one-handed operation for quick loading and unloading.
• Spring Loaded Tie Downs are designed to be taken off rack when not in use by a simple half turn
• Eye Bolt Tie Downs provide a lashing point for ratchet straps
• Easy to attach, detach and rearrange on the BASE Rack, can attach to the dovetail track at any point on the rack for endless mounting options
• California Residents: WARNING
+ View More Specs - View Less Specs

Cali Raised LED Premium Roof Rack with 42" White Dual Row Combo LED Light Bar - CR2829

• (1) 42" Dual row combo beam LED light bar
• (1) Short blue backlit switch
• Includes cut outs and light kit
• Easy to install, 100% bolt-on
• Powder-coated black (includes 9 black extrusion bars and all required hardware)
• Available in both standard (smooth sides) and side lighting cutouts
• Configurations (cutouts for LED's on both driver and passenger sides)
• Engineered and manufactured in the USA
• 2 year warranty
• Rack will add 5" to the overall height of your vehicle
• Due to the rear wind deflector on the 4Runner, our 4Runner Complete Lighting package includes (4) 20W Pods and Toyota 4Runner 16pc LED bulb replacement kit
• California Residents: WARNING
+ View More Specs - View Less Specs

Cali Raised LED Premium Roof Rack with 42" White Dual Row Combo LED Light Bar - CR2877

• 42" Dual row combo beam LED light bar
• Tall blue backlit switch
• Includes light kit
• Easy to install, 100% bolt-on
• Powder-coated black (includes 6 black extrusion bars and all required hardware)
• Available in both standard (smooth sides) and 360-degree lighting configurations (cutouts for LED's on all sides)
• Engineered and manufactured in the USA
• 2 year warranty
• California Residents: WARNING
+ View More Specs - View Less Specs

Rhino-Rack Vortex Platform Wheel Carrier - SPWC