Smittybilt SRC Defender Roof Rack - 77717

• Fitment: Direct Fit
• 18-Current Wrangler JL, 4-Door
• Removable cross bars for easy soft or hardtop removal
• Four-point mountingattaches to front door mounts and to the rear frame
• Holds up to 300 lb of evenly distributed cargo
• The perfect add-on rack for all SRC front, rear, and side tubular products
• Modular design is easy to install
• Soft top will not fold down without removing rear section of rack
• California Residents:WARNING
+ View More Specs - View Less Specs

Smittybilt Defender Rack Welded One-Piece Roof Rack - 45454JL

• Fitment: Direct Fit
• Wrangler JL, 4-Door
• Hard top models
• 4.5' wide x 4.5' long x 4" sides
• Textured black powder coat finish
• Made from 16-gauge, fully welded, 1" round steel tubing
• Welded light tabs and aerodynamic design
• Mounting brackets included
• California Residents: WARNING
+ View More Specs - View Less Specs

Smittybilt Defender Basket Rack - 45304JT

• Fitment: Direct Fit
• 2020-Current Jeep Gladiator
• Light tabs
• Accepts Defender accessories, such as shovel and jack mount
• Two-stage textured matte black powder coat finish
• 5-year limited warranty on finish
• Smittybilt Advantage Limited Lifetime Warranty
• No drilling required for installation
• 100% completely bolt-on installation
• California Residents: WARNING
+ View More Specs - View Less Specs

ARB 84" x 51" Base Rack with Mount Kit and Deflector - BASE11

• Fitment: Direct Fit
• Extruded aluminum beams feature rigid internal bracing
• Fully welded construction - excluding corner caps
• Fully assembled ready-to-fit mount brackets (sold separately)
• Integrit textured black powder coat finish
• Strength through design requires no additional cross bars
• Dovetail accessory attachment allows easy one-handed attachment
• Provision to easily run wiring within the base rack assembly
• California Residents: WARNING
+ View More Specs - View Less Specs

ARB Steel Roof Rack Basket with Mesh Floor - 3813010M

• Fitment: Direct Fit
• 70 L x 44 W inches
• Mesh floor
• Manufactured from strong, tubular steel to the same high standards as our deluxe steel roof racks
• Provides up to 165lbs of carrying capacity
• Structurally mounted to the roof with either zinc die cast mounting bases or mount rails
• Stainless steel mounting fasteners
• California Residents: WARNING
+ View More Specs - View Less Specs

ARB Steel Roof Rack Basket - 3800250

• Fitment: Direct Fit
• 52 L x 44 W inches
• Manufactured from strong, tubular steel to the same high standards as our deluxe steel roof racks
• Provides up to 165lbs of carrying capacity
• Structurally mounted to the roof with either zinc die cast mounting bases or mount rails
• Stainless steel mounting fasteners
• California Residents: WARNING
+ View More Specs - View Less Specs

ARB 84" x 51" Base Rack with Deflector and Full Cage Rails - BASE14

• Fitment: Direct Fit
• Extruded aluminum beams feature rigid internal bracing
• Fully welded construction - excluding corner caps
• Fully assembled ready-to-fit mount brackets (sold separately)
• Integrit textured black powder coat finish
• Strength through design requires no additional cross bars
• Dovetail accessory attachment allows easy one-handed attachment
• Provision to easily run wiring within the base rack assembly
• California Residents: WARNING
+ View More Specs - View Less Specs

ARB 84"L x 51"W Base Rack with Deflector (Black) - BASE271

• Fitment: Direct Fit
• 84"L x 51"W
• Durable powder-coat finish
• Fully-welded construction with its unique vertical cross beam design
• Provides endless mounting and attachment options
• Electrical cabling can be fed in either through the removable corner caps or via the capped access points available on the inner surface of the side perimeter beams
• Wind deflector included
• Comes with mounting kit
• California Residents: WARNING
+ View More Specs - View Less Specs

ARB Roof Rack Steel Cargo Basket - 3813010MK4

• Fitment: Direct Fit
• The most popular sizes are now built in the ARB Flat Racks to accommodate multiple different tools and gear
• Steel flat racks are rated to a 330lbs load (subject to vehicle manufacturer's maximum load rating)
• Zinc rich primer for additional corrosion resistance (steel racks)
• Black powdercoat finish
• California Residents:WARNING
+ View More Specs - View Less Specs

ARB Steel Roof Rack Basket with Mesh Floor - 3813020M

• Fitment: Direct Fit
• 44 L x 44 W inches
• Mesh floor
• Manufactured from strong, tubular steel to the same high standards as our deluxe steel roof racks
• Provides up to 165lbs of carrying capacity
• Structurally mounted to the roof with either zinc die cast mounting bases or mount rails
• Stainless steel mounting fasteners
• California Residents: WARNING
+ View More Specs - View Less Specs

ARB 70"x44" Flat Rack with Mesh Floor Kit - 3813030K4

• Fitment: Direct Fit
• Floor kit measures 70" x 44"
• Black powder coat finish
• Constructed from 25mm steel tube
• Pricision cut drainage channels reduce build up of dirt
• Full length, zinc annealed steel support channel with plastic protection strip to distribute load
• MIG welding is used on the joints to ensure the optimum strength of each rack
• California Residents:WARNING
+ View More Specs - View Less Specs

ARB Steel Roof Rack Basket - 3813010

• Fitment: Direct Fit
• 70 L x 44 W inches
• Manufactured from strong, tubular steel to the same high standards as our deluxe steel roof racks
• Provides up to 165lbs of carrying capacity
• Structurally mounted to the roof with either zinc die cast mounting bases or mount rails
• Stainless steel mounting fasteners
• California Residents: WARNING
+ View More Specs - View Less Specs

ARB Alloy Roof Rack Basket with Mesh Floor - 4913010M

• Fitment: Direct Fit
• Mesh floor
• Alloy
• Durable millennium gray Powdercoat
• 40% lighter than a steel cage
• High-strength alloy construction using a combination of tig and CMT (cold metal transfer) welding process
• California Residents: WARNING
+ View More Specs - View Less Specs

ARB Steel Roof Rack Basket with Mesh Floor - 3800010M

• Fitment: Direct Fit
• 87 L x 49 W inches
• Mesh floor
• Manufactured from strong, tubular steel to the same high standards as our deluxe steel roof racks
• Provides up to 165lbs of carrying capacity
• Structurally mounted to the roof with either zinc die cast mounting bases or mount rails
• Stainless steel mounting fasteners
• California Residents: WARNING
+ View More Specs - View Less Specs

Smittybilt Defender Platform Roof Rack - 9450

• Fitment: Direct Fit
• 50" wide x 94" long x 2" sides
• Mounting brackets not included
• Low profile extruded aluminum, low weight without sacrificing strength
• Black powder coated and anodized aluminum for increased corrosion resistance
• Vehicle specific mounting, fitments are designed to accent each vehicle's appearance
• Compatible with industry standard accessories and most popular brands
• Compatible with light bars for quick and easy mounting
• Bolt-on and no-drill application allows for trouble-free mounting without damaging your vehicle
• Racks arrive partially assembled for less errors and frustration
• Light brackets included, mounts up to four pod lights and one light bar
• California Residents: WARNING
+ View More Specs - View Less Specs

Smittybilt Rugged Rack Basket - 17185

• Fitment: Direct Fit
• The ultimate off-road rack/basket combination
• One of the largest cargo baskets available
• Holds up to 300 pounds of evenly distributed cargo
• Aluminum
• 6.75" H x 70" L x 50" W
• Textured matte black finish
• Contoured design eliminates "boxy" look and complements today's vehicles
• Universal fit: U-bolts are included to attach to your vehicle's crossbars/roof rack
• DRS-6 mounting brackets also included for use with the Smittybilt Defender Rack series
• California Residents: WARNING
+ View More Specs - View Less Specs

Smittybilt Defender Platform Roof Rack - 6045