Fab Fours Matrix Front Bumper with Full Guard - FS23-X5950-1

• Fitment: Direct Fit
• 23-24 Ford F250/F350 Super Duty
• Winch ready for Warn Zeon 12 or Lower. Bolt Pattern is 10?x4.5?. See Notes Section of Relocation Kit Part Numbers
• Center mount accommodates a single row 30? light bar (not included). Double row can be used if not running a winch
• Accommodates factory 360 camera (2017-2023 models). Minor camera interference with Pre-runner and Full Grille Guard
• Side mounting slots and tabs will hold up to (4) 3? X 3? cube lights (lights not included). Flush Mounts will not work. Must use single bolt setup
• Accommodates Adaptive Cruise Control
• Standard Design Available in Full Guard / Pre-runner Guard/ No Guard options (Meets Factory Wheel Well)
• Open Fender Design Available in Full Guard / Pre-runner Guard/ No Guard options (Shorter Wheel Well Extension)
• Slim High and Tight" Design
• Removable light inserts for optimal customization
• Provides far more tire clearance
• Integrated D-Ring Mounts
• NOTES: Tremor packages that include factory winch are not compatible
• California Residents: WARNING
+ View More Specs - View Less Specs

Hi-Lift 48" X-Treme Jack - XT-485

• Fitment: Universal Fit
• 48" All-cast constructed jack
• One position for all winching, clamping, and spreading positions
• 7000lb (3175.14kg) tested capacity
• X-Treme top clamp, a unique winch clamp spreader attachment, replaces the clamp-clevis of standard Hi-Lift
• Unique gold zinc-coated winch/clamp/spreader attachment ensures the greatest rust resistance from extreme use
• Charcoal metallic powder coated jack with gold zinc coated handle and hardware
• Two piece handle and socket is durable and reliable
• Safe use information stickers, including rated load details and operating instructions, affixed to handle
• California Residents: WARNING
+ View More Specs - View Less Specs

Hi-Lift 48" All Cast Jack - HL-485

• Fitment: Universal Fit
• 48" All-cast constructed jack
• Lifts, winches, clamps and more
• Constructed with cast iron components for ultimate strength and durability
• 7,000 lbs (3175.14kg) tested capacity
• Top winch connector clamp and powder coated finish with zinc-plated hardware standard on all jacks
• Two piece handle and socket is durable and reliable
• Equipped with a shear bolt to prevent the jack from being used on unsafe loads greater than 7,000 lbs
• Safe use information stickers, including rated load details and operating instructions, affixed to handle
• Hi-Lift Jacks are the only all-cast jacks manufactured in the world
• California Residents: WARNING
+ View More Specs - View Less Specs

Hi-Lift Jack 60" Cast and Steel Jack - HL-604

• Fitment: Universal Fit
• Cast and steel jack
• Black powder coat
• Overall length: 60 inch
• Max lift height: 48 inch
• Weight: 31lbs.
• California Residents: WARNING
+ View More Specs - View Less Specs

Hi-Lift Jack 48" Cast & Steel Jack - HL-484

• Fitment: Universal Fit
• Cast and steel jack
• Black powder coat
• Overall length: 49 inch
• Max lift height: 37.5 inch
• Weight: 28lbs.
• California Residents: WARNING
+ View More Specs - View Less Specs

Hi-Lift Jack Off-Road Jack Base - ORB

• Fitment: Universal Fit
• Use the Hi-Lift off-road base to alleviate jack sinkage on soft ground
• Convenient to use
• Easy to store
• California Residents: WARNING

Hi-Lift Jack Jack Accessory Kit - ORK

• Fitment: Universal Fit
• Includes 8 foot strap, winch tensioner, custom nose attachment, gloves, hardware and carrying case
• California Residents: WARNING

Hi-Lift Jack Adjustable Tube Mount - TM-700

• Fitment: Universal Fit
• Fits 1-2" diameter bars
• Manufactured of 6061-T6 structural aluminum
• Stainless steel hardware
• Securely stores your Hi-Lift jack
• California Residents: WARNING
+ View More Specs - View Less Specs

Hi-Lift Jack 3" x 15' 30,000lbs Reflective Recovery Strap - STRP-315

• Fitment: Universal Fit
• 3 inch x 15 ft. 30,000lbs./13,607kg
• Reflective Loop Liners for night use
• California Residents: WARNING

Hi-Lift Jack 4xRac Mount Kit - 4X400

• Fitment: Universal Fit
• It may be installed on any flat surface 2-1/2" wide or more
• Kit includes 2 mounting brackets, 2 mounting bracket caps, 2 wing nuts, 8 hex head cap screws, 8 nyloc nuts and 1 handle strap
• California Residents: WARNING

Hi-Lift Jack Running Gear Cover - RGJC

• Fitment: Universal Fit
• Easy on, easy off zipper design
• Made with marine grade vinyl
• UV protected, mold and mildew resistant
• Features carbon fiber embossing and PVC Hi-Lift logo patch
• Fits all Hi-Lift Jack Models
• High quality zipper
• Stronger material resists fading and tearing
• Improved fit
• California Residents: WARNING
+ View More Specs - View Less Specs

Hi-Lift Jack 60" All Cast Jack - HL-605

• Fitment: Universal Fit
• Cast and steel jack
• Red powdercoat
• Overall length: 60 inch
• Max lift height: 50 inch
• Weight: 32lbs.
• California Residents: WARNING
+ View More Specs - View Less Specs

Hi-Lift Jack Handle Keeper (Black) - HK-B

• Fitment: Universal Fit
• Black
• Rugged polyurethane Hi-Lift handle keeper firmly holds the Hi-Lift Jack handle
• California Residents: WARNING

Hi-Lift Jack Hi-Lift Versatile Lock - VERS-LK

• Fitment: Universal Fit
• Safe lock, protection for Hi-Lift Jack
• Works with several Hi-Lift mounts
• 1/2 inch bolt
• Replaces an existing knob or wing nut
• Once locked, the locking knob spins freely and cannot be remove
• California Residents: WARNING
+ View More Specs - View Less Specs

Hi-Lift Jack Stainless Steel Sliding Tie-Points - SS-2

• Fitment: Universal Fit
• Stainless Steel Sliding Tie-Points
• California Residents: WARNING

Hi-Lift Jack Roll Cage Mount - RC-875