Fab Fours Premium Winch Front Bumper (Black) - FS17-A4151-1

• Fitment: Direct Fit
• Black Powder Coat
• Provides far more tire clearence
• Winch Ready-Accepts up to 16,500 lb. winch
• 3/4" thick D-Ring mounts holds up to 7/8" shackle 2-Piece mounting system with adjustability to allow a "custom" fit
• Fab Fours' signature injection molded light housings
• Fab Fours' 90mm fog and 60mm turn inicator lights are included Free with the Bumper
• 2 Stage Black Powder Coat
• 3/16" Steel Construction
• 230-270 lbs
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Premium Winch Front Bumper with Full Guard - FS23-A5950-1

• Fitment: Direct Fit
• 2023-2024 F250/F350
• Tremor packages that include factory winch are not compatible
• Provides far more tire clearance
• *Winch Ready Accepts up to 16,500 lb. winches or smaller. Designed around the WARN 16.5ti but not limited to that winch. Bolt Pattern is 10?x4.5?
• **Accommodates factory 360 camera. Minor camera interference with Pre-runner and Full guard options
• Integrated Adaptive Cruise Control Bracket
• Side mounting slots and tabs will hold up to (2) 3? X 3? cube lights per side (lights not included)
• Available in Full Guard / Pre-runner Guard/ No Guard options
• 1? D-Ring mounts
• 2-piece mounting system with adjustability to allow a custom" fit
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Matrix Front Bumper with Full Guard - FS23-X5950-1

• Fitment: Direct Fit
• 23-24 Ford F250/F350 Super Duty
• Winch ready for Warn Zeon 12 or Lower. Bolt Pattern is 10?x4.5?. See Notes Section of Relocation Kit Part Numbers
• Center mount accommodates a single row 30? light bar (not included). Double row can be used if not running a winch
• Accommodates factory 360 camera (2017-2023 models). Minor camera interference with Pre-runner and Full Grille Guard
• Side mounting slots and tabs will hold up to (4) 3? X 3? cube lights (lights not included). Flush Mounts will not work. Must use single bolt setup
• Accommodates Adaptive Cruise Control
• Standard Design Available in Full Guard / Pre-runner Guard/ No Guard options (Meets Factory Wheel Well)
• Open Fender Design Available in Full Guard / Pre-runner Guard/ No Guard options (Shorter Wheel Well Extension)
• Slim High and Tight" Design
• Removable light inserts for optimal customization
• Provides far more tire clearance
• Integrated D-Ring Mounts
• NOTES: Tremor packages that include factory winch are not compatible
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Vengeance Front Bumper with Pre-Runner Guard (Black) - DX21-V4552-1

• Fitment: Direct Fit
• Designed for the TRX model only
• With pre-runner guard
• Sensor compatible
• 2 stage black powder coat finish
• 11 gauge US steel
• Overall design and fit is "High and Tight" to the contours of the vehicle
• Lower cutout to provide increased airflow
• Provides far greater tire clearance
• Complete bolt-on front bumper w/ provided brackets that tie directly to the frame
• Allows for an integrated 20 inch Rigid Industries LED light bar in the center (light bar not included)
• Mounting options on each side for (3) 3x3" Dually lights to give you maximum LED light coverage
• Optional: Center Mesh Insert (Sold separately - Part# M2450-1)
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Matrix Front Bumper with Pre-Runner Guard (Black) - FS11-X2552-1

• Fitment: Direct Fit
• 11-16 Ford F-250/F-350 Super Duty
• Pre-runner guard
• Fab Fours 2 stage black powder coat finish
• 3/16" plate steel construction
• "Slim high and tight" design
• Provides far more tire clearance
• Integrated d-ring mounts
• Winch ready for Warn Zeon 12 or Lower (Winch not included)
• If running a Warn Zeon, Control Box Relocation Kit (PartNo: 89960) is required
• Center mount accommodates a single row 30" light bar (not included)
• Optional relocation bracket available for Adaptive Cruise Control
• Side mounting slots and tabs will hold up to (4) 3" X 3" cube lights (lights not included)
• Flush mounts/surface mounts will not work. Must use single bolt setup
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Vengeance Front Bumper with Pre-Runner Guard (Black) - JL18-D4652-1

• Fitment: Direct Fit
• Pre-Runner guard
• 2 Stage black powder coat
• 11 gauge US steel construction
• Overall design and fit is "High and Tight" to the contours of the vehicle
• Provides far greater tire clearance
• Allows for an integrated 20inch Rigid Industries LED light bar in the center (light bar not included)
• Mounting options on each side for (2) 3x3 dually lights to give you maximum LED light coverage
• Lower cutout to provide increased airflow
• Retains factory tow hooks, with factory hardware
• Complete bolt-on front bumper with provided brackets that tie directly to the frame
• Weight 75lbs
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Heavy Duty Sensor Rear Bumper (Black) - DR09-W2952-1

• Fitment: Direct Fit
• Sensor compatible
• Will accommodate dual exhaust
• 2 stage black powder coat finish
• Made from 3/16" steel
• Integrated steps on either side of the tailgate
• Retain OEM receiver hitch and wiring locations
• 3/4″ D-ring recovery points
• All sensor testing is done on lifted trucks
• Sensor sensitivity, OE sensor housing, orientation, and operating conditions are all variables that will influence functionality of the sensors
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Vengeance Front Bumper with No Guard (Black) - TT16-D3651-1

• Fitment: Direct Fit
• Overall design and fit is High and Tight to the contours of the vehicle
• Lightweight: No Gaurd 65 lbs. with Pre-Runner Guard 75 lbs
• Center Mount allows for a Rigid Industries E-Series 20 inch LED light bar (light bar not included)
• Mounting options on each side for (2) 2x2 Dually lights to give you maximum LED light coverage (Lights not included)
• Lower cutout to provide maximum airflow
• Complete bolt-on front bumper w/ provided brackets that tie directly to the frame
• Bare Steel
• 11 ga. U.S. Steel Construction
• 100% Made in the U.S.A.
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Black Steel Front Bumper with Full Guard (Black) - DR19-S4460-1

• Fitment: Direct Fit
• Ram HD 2500-3500
• Full guard
• 2 Stage black powder coat
• 14 Gauge US steel construction
• Ranch Style Bumper with diamond tread plate
• Sensor compatible
• Bolt-on tow hooks included
• Accommodates 3x3 LED light cubes (lights not included)
• Optional winch tray: (Part No. M1650-1) Sensor will need to be disconnected if using this mount
• If running a large frame WARN winch we recommend using the Remote Socket Extension (WARN PN 98348)
• Optional bolt-on 1 inch D-ring mounts (PN M1850-1)
• Includes Hi-Flow lower guard with sensors holes
• Weight: 140-180 lbs
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Black Steel Front Ranch Bumper with Gull Guard (Black) - GM14-S3160-1

• Fitment: Direct Fit
• Black powder coat
• Combination Pipe and Tread Plate Construction
• Gloss Black Powder Coat or Bare Steel (-B instead of -1)
• Bolt-on tow hooks NOW included
• Light Mounts for Factory Fog Lights
• Optional Bolt-on Winch Mount (Accepts up to 16,500 lb. winches or smaller)
• Optional Bolt-on 1" D-ring mounts
• Optional Bolt-on 2" Receiver
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Vengeance Series Rear Bumper (Black) - FS08-E1351-1

• Fitment: Direct Fit
• 2 Stage black powder coat
• 11gauge US steel construction
• Two front-side openings allow light options: (4) 3x3 Dually lights or (2) 6" light bars (lights not included)
• Sensor compatible
• Retain OEM receiver hitch and wiring location
• Weight: 65 lbs
• Sensors optimized for vehicles with suspension lifts – stock height trucks may require tuning the sensor mount and will require special care
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Standard Rear Bumper (Black) - JT20-Y1952-1

• Fitment: Direct Fit
• Sensor compatible
• 2 stage matte black powder coat finish with epoxy primer
• 3/16" steel construction
• Retains the factory tow hooks
• Accepts OE license plate lights
• Housings for 2 LED light pods (Lights not included)
• Weight 70 lbs
• Height 8.5"
• Width 65"
• Depthh 10.5"
• 100% Made in the USA
• Sensor housings were designed around the Rubicon package. Overland package will require different housings
• Mojave trim package will not work without modifications. Please contact Fab Fours for more details
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Rear Bumper (Black) - TT16-W3651-1

• Fitment: Direct Fit
• Toyota Tacoma
• For bumpers with rear back-up sensors
• 3/16" Steel Construction
• D-Rings are cut with 3/4" steel and will accept up to a 7/8" Shackle
• Retain OEM Receiver Hitch and Wiring Location
• Fab Fours 2 Stage Black Powder Coat
• Weight: 115 lbs.
• U.S. Steel Construction
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Black Steel Elite Rear Bumper with Sensor Holes (Matte Black) - DR19-U4450-1

• Fitment: Direct Fit
• Ram HD 2500-3500
• Matte black powder coat finish
• Combination pipe and smooth plate construction
• Pre-drilled sensor holes
• Retains OEM receiver hitch and wiring locations
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Power Stop Z23 Evolution Sport Front and Rear Brake Kit - K6268

• Fitment: Direct Fit
• Front and rear brake kit
• Performance rotors and matching ceramic pads with 30% savings
• Big brake feel without the big price
• Brake kits match the right pad/rotor combination for faster stops
• Includes carbon fiber ceramic brake pads
• Provide more pad bite without noise or dust
• Drilled/slotted rotor combination
• Spend less money on these kits than a dealer charges for stock brakes
• Premium stainless steel hardware kit included where applicable
• High temperature ceramic lubricant included with every kit
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Winch Mount (Black) - GM05-N1350-1

• Fitment: Direct Fit
• Large frame winch mount
• Black powder coat
• One piece winch mount
• Fully welded
• No parts or brackets to bolt together
• 3/8" steel mounts
• Slips through the factory to hook slots straight to the factory frame
• 2 Stage Matte Black Powder Coat or Bare Steel (-B instead of -1)
• 100% Made in the U.S.A.
• Large Frame holds winches 16,500 lbs or smaller
• Recommended Winches for Large Frames: Warn Zeon, 16.5 Warn TI, or the M12,000
• California Residents: WARNING
+ View More Specs - View Less Specs

Power Stop Z36 Severe-Duty Truck & Tow Front and Rear Brake Kit - K8026-36