Rigid Industries RDS-Series 20" LED Light Bar - 882213

• Fitment: Universal Fit
• New 2-piece housing that is stronger, more durable and features an improved cooling system.
• Patented Specter Optics
• 50,000+ Hr LED Lifespan
• Instant On / Off - No Warm Up
• RoHS Compliant
• Over / Under Voltage Protection
• Durable Polycarbonate Lens
• Integrated Thermal Management
• GORE Pressure Equalizing Vent
• Designed, Engineered, & Assembled in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Matrix Front Bumper with Full Guard (Black) - FS17-X4150-1

• Fitment: Direct Fit
• 2 stage black powder coat finish
• 3/16 inch plate steel construction
• Bumper with full grille guard
• Aggressive design
• Winch ready for Warn Zeon 12 or lower
• Center mount accommodates a 30 inch light bar (not included)
• Removable inserts that can be painted
• Side mounting slots and tabs for various light options (lights not included)
• Lower cutout for increased airflow
• Integrated sensor holes
• Relocation bracket is required for adaptive cruise control for 2017 Super Duty (M3850-1)
• Chrome grilles will not work with relocation bracket
• Warn Zeon Control Box Relocation is required
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Matrix Front Bumper with Full Guard - FS23-X5950-1

• Fitment: Direct Fit
• 23-24 Ford F250/F350 Super Duty
• Winch ready for Warn Zeon 12 or Lower. Bolt Pattern is 10?x4.5?. See Notes Section of Relocation Kit Part Numbers
• Center mount accommodates a single row 30? light bar (not included). Double row can be used if not running a winch
• Accommodates factory 360 camera (2017-2023 models). Minor camera interference with Pre-runner and Full Grille Guard
• Side mounting slots and tabs will hold up to (4) 3? X 3? cube lights (lights not included). Flush Mounts will not work. Must use single bolt setup
• Accommodates Adaptive Cruise Control
• Standard Design Available in Full Guard / Pre-runner Guard/ No Guard options (Meets Factory Wheel Well)
• Open Fender Design Available in Full Guard / Pre-runner Guard/ No Guard options (Shorter Wheel Well Extension)
• Slim High and Tight" Design
• Removable light inserts for optimal customization
• Provides far more tire clearance
• Integrated D-Ring Mounts
• NOTES: Tremor packages that include factory winch are not compatible
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Matrix Front Bumper with Full Guard (Black) - DR19-X4450-1

• Fitment: Direct Fit
• 2 stage black powder coat finish
• 3/16 inch plate steel construction
• With full guard
• Aggressive design
• Provides far more tire clearance
• Lower cutout for increased airflow
• Winch ready for Warn Zeon 12 or lower
• Center mount accommodates a 30 inch light bar (Light bar not included)
• Side mounting slots and tabs for various light options (lights not included)
• Removable light inserts can be painted
• Integrated sensor holes
• Integrated D-ring mounts
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Vengeance Front Bumper with Pre-Runner Guard (Black) - DX21-V4552-1

• Fitment: Direct Fit
• Designed for the TRX model only
• With pre-runner guard
• Sensor compatible
• 2 stage black powder coat finish
• 11 gauge US steel
• Overall design and fit is "High and Tight" to the contours of the vehicle
• Lower cutout to provide increased airflow
• Provides far greater tire clearance
• Complete bolt-on front bumper w/ provided brackets that tie directly to the frame
• Allows for an integrated 20 inch Rigid Industries LED light bar in the center (light bar not included)
• Mounting options on each side for (3) 3x3" Dually lights to give you maximum LED light coverage
• Optional: Center Mesh Insert (Sold separately - Part# M2450-1)
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Matrix Front Bumper with Pre-Runner Guard (Black) - FS11-X2552-1

• Fitment: Direct Fit
• 11-16 Ford F-250/F-350 Super Duty
• Pre-runner guard
• Fab Fours 2 stage black powder coat finish
• 3/16" plate steel construction
• "Slim high and tight" design
• Provides far more tire clearance
• Integrated d-ring mounts
• Winch ready for Warn Zeon 12 or Lower (Winch not included)
• If running a Warn Zeon, Control Box Relocation Kit (PartNo: 89960) is required
• Center mount accommodates a single row 30" light bar (not included)
• Optional relocation bracket available for Adaptive Cruise Control
• Side mounting slots and tabs will hold up to (4) 3" X 3" cube lights (lights not included)
• Flush mounts/surface mounts will not work. Must use single bolt setup
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Matrix Front Bumper with Pre-Runner Guard (Black) - GS19-X3952-1

• Fitment: Direct Fit
• 2 stage black powder coat finish
• 3/16 inch plate steel construction
• Front bumper with pre-runner guard
• Aggressive design
• Winch ready for Warn Zeon 12 or lower
• Center mount accommodates a 30 inch light bar (not included)
• Removable inserts that can be painted
• Provides far more tire clearance
• Lower cutout for increased airflow
• Integrated sensor holes
• Warn Zeon Control Box Relocation is required
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Overland Rack (Black) - JTOR-01-1

• Fitment: Direct Fit
• 2-stage matte black powder coat finish
• Expandable design
• Multiple tie down points
• Multiple mounting points
• 10 integrated pod mounts
• Up to 500lb capacity with the 2 included cross-members
• Ability to create solid floor by purchasing extra cross members
• Integrated roof access step
• Superior strength
• Stainless steel mounting hardware included
• 12 gauge steel construction
• Weight 220 lbs
• Height 27"
• Width 61"
• Length 60"
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Rigid Industries RDS-Series Pro 40" Spot LED Light Bar (Black) - 884213

• Fitment: Universal Fit
• E-Series housing with a gentle arc
• GORE pressure equalizing vent
• Harness and switch included (Exclusions apply)
• High-grade aluminum alloy heatsink
• IP68 compliant - dust / water ingress
• 50,000+ hour lifespan
• 9-36 V DC
• Patented technology
• Impact resistant polycarbonate lens
• Integrated thermal management system
• 2 black powder coated, L-shape brackets
• Open leads, no connector
• Harness with switch
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Matrix Series Front Bumper with Pre-Runner Guard (Black) - FB21-X5252-1

• Fitment: Direct Fit
• 21-Current Ford Bronco, 2 & 4 Door
• Matrix Series front bumper with pre-runner guard
• 2 stage matte black powder coat with epoxy primer
• Winch ready for the WARN VR EVO 10 or lower
• Center mount for integrated 20" single row light bar
• Mounting options on each side for (2) 3x3 LED cube lights
• Integrated D-ring mounts: customizable / removable light inserts for different color options
• Provides far greater tire clearance
• Lower cutout to provide increased airflow
• Made from 3/16th steel construction
• Weight: 140 lbs.
• Height: 20"
• Width: 73"
• Depth: 19"
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Rigid Industries SR-L Series Surface Mount LED Spreader Light (White Halo) - 53120

• Fitment: Universal Fit
• White halo
• Surface mount
• 9-36 VDC
• Pressure equalizing valve
• High impact polycarbonate lens
• Dedicated wire to run backlight
• Removable surround for color matching
• Wiring harness sold seperately #40300
• Halo backlight
• 120 degree wide beam pattern
• No exposed hardware
• High grade aluminum alloy housing and heatsink
• Stainless steel mounting brackets
• Hardware
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Vengeance Front Bumper with Pre-Runner Guard (Black) - JL18-D4652-1

• Fitment: Direct Fit
• Pre-Runner guard
• 2 Stage black powder coat
• 11 gauge US steel construction
• Overall design and fit is "High and Tight" to the contours of the vehicle
• Provides far greater tire clearance
• Allows for an integrated 20inch Rigid Industries LED light bar in the center (light bar not included)
• Mounting options on each side for (2) 3x3 dually lights to give you maximum LED light coverage
• Lower cutout to provide increased airflow
• Retains factory tow hooks, with factory hardware
• Complete bolt-on front bumper with provided brackets that tie directly to the frame
• Weight 75lbs
• 100% Made in the USA
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Heavy Duty Sensor Rear Bumper (Black) - DR09-W2952-1

• Fitment: Direct Fit
• Sensor compatible
• Will accommodate dual exhaust
• 2 stage black powder coat finish
• Made from 3/16" steel
• Integrated steps on either side of the tailgate
• Retain OEM receiver hitch and wiring locations
• 3/4″ D-ring recovery points
• All sensor testing is done on lifted trucks
• Sensor sensitivity, OE sensor housing, orientation, and operating conditions are all variables that will influence functionality of the sensors
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Vengeance Front Bumper with No Guard (Black) - TT16-D3651-1

• Fitment: Direct Fit
• Overall design and fit is High and Tight to the contours of the vehicle
• Lightweight: No Gaurd 65 lbs. with Pre-Runner Guard 75 lbs
• Center Mount allows for a Rigid Industries E-Series 20 inch LED light bar (light bar not included)
• Mounting options on each side for (2) 2x2 Dually lights to give you maximum LED light coverage (Lights not included)
• Lower cutout to provide maximum airflow
• Complete bolt-on front bumper w/ provided brackets that tie directly to the frame
• Bare Steel
• 11 ga. U.S. Steel Construction
• 100% Made in the U.S.A.
• California Residents: WARNING
+ View More Specs - View Less Specs

Fab Fours Black Steel Front Bumper with Full Guard (Black) - DR19-S4460-1