Fab Fours Premium Front Bumpers

From $2,679.99

• Provides more tire clearance
• Winch ready (Accepts up to 16,500 lb. winches or smaller)
• 3/4 inch D-ring Mounts
• 1/4 inch Boxed mounting system with adjustability to allow a custom fit
• Fab Fours signature injection molded light housings
• Fab Fours 90mm fog and 60mm turn indicator lights included FREE with the bumper
• 2 Stage matte black powder coat or bare steel (-B instead of -1)
• Combination of 1/4 inch and 3/16 inch steel construction
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Vengeance Front Bumpers

From $1,399.99

• Available in 2 Stage Black Powder Coat or Bare Steel
• Overall design and fit is inchHigh and Tight inch to the contours of the vehicle
• The Vengeance Series front bumper is sensor compatible
• Allows for an integrated 20 inch LED light bar in the center (light bar not included)
• Mounting options on each side for (2) 2x2 Dually lights to give you maximum LED light coverage
• Lower cutout to provide airflow to intercoolers
• Complete bolt-on front bumper w/ provided brackets that tie directly to the frame
• Sensors optimized for vehicles with suspension lifts - stock height trucks may require tuning the sensor mount and will require special care
• Available in a no guard or pre-runner guard option.
• California Residents: WARNING

Fab Fours Premium Rear Bumpers

From $1,839.99

• Bare steel or Black Powder coat
• 3/16 inch steel construction
• Fab Four's signature knife edge and recessed D-Ring mounts
• CB antenna mount
• Compatible with factory receiver hitch
• Tire carrier sold separately
• California Residents: WARNING

Fab Fours Front Grumper Bumpers

From $3,809.99

• Removable inserts for customization options
• Provides greater tire clearance
• Winch Ready-Accepts Warn Zeon Winches
• Integrated D-Ring mounts that hold up to 7/8 shackle
• 11-gauge steel construction
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Black Steel Front Ranch Bumpers

From $1,729.99

• Combination Pipe and Tread Plate Construction
• Gloss Black Powder Coat or Bare Steel (-B instead of -1)
• Back up lights included
• Pre-drilled sensor holes
• Retains OEM receiver hitch and wiring locations
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Vengeance Rear Bumpers

From $1,099.99

• Available in Bare Steel and Fab Fours 2 Stage Black Powder Coat
• Two front-side openings allow light options
• (4) 2x2 Dually lights or (2) 6 inch light bars (lights are not included)
• 11gauge US Steel Construction
• Sensor compatible
• Retain OEM Receiver Hitch and Wiring Location
• 11gauge US Stee
• Weight: 65 lbs.
• U.S. Steel Construction
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Black Steel Front Bumpers

From $1,729.99

• Combination Pipe and Tread Plate Construction
• Gloss Black Powder Coat or Bare Steel (-B instead of -1)
• Bolt-on tow hooks NOW included
• Light Mounts for Factory Fog Lights
• Optional Bolt-on Winch Mount (Accepts up to 12,000 lb. winches or smaller)
• Optional Bolt-on 1 inch D-ring mounts
• 100% Made in the USA
• California Residents: WARNING

SPOD 8 Circuit Special Edition (SE) Systems

From $968.99

SPOD Rocker Switches

From $11.99

• Multiple uses
• This replacement switch will let you know exactly what you are turning on
• It features not only the description but also an image of it functionality
• California Residents: WARNING

Fab Fours Matrix Front Bumpers

From $1,739.99

• Aggressive design
• Center mount accommodates a 30 inch light bar (not included)
• Customizable - Removable inserts for different color options
• Side mounting slots and tabs for various light options (lights not included)

SPOD BantamX Control Panels

From $1,155.99

• Available with amber, blue, green or red LEDs
• Fully programmable, digital controlled system
• 8 circuits rated at 30 amps at 12.5 VDC per circuit
• 16-position terminal block (easily attach accessories)
• 2 controller ports (RJ45) for Ethernet cables
• Integrated low voltage cutoff (LVCO) battery protection with optional override
• One ATM mini-style fuse for LVCO protection and reset
• Failsafe self-healing fault protection system (from 1.5 to 30amps)
• Current-sensing MOSFETs controlled by a microprocessor (no fuses and relays)
• 50amp auto-resetting circuit breaker
• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket
• Operates on 12VDC or 24VDC
• 8-position input terminal block for controlling outputs
• Built-in Bluetooth capabilities for remote control
• Protection against: overheating, over-current, shorts, reverse polarity and field collapse
• Ignition control and safety lock-out for switches 1 and 2 (optional)
• Up to 4 BantamX units can be daisy chained and controlled by one Touchscreen
• On-demand wireless software updates/upgrades
• 1-year limited warranty

SPOD SourceLT Switch Control Panels

From $681.99

• Available in amber, blue, red or green LEDs
• 6 circuits rated at 30 amps at 12.5 VDC per circuit
• 12-position terminal block (easily attach accessories)
• Controller cable (10 foot) for simple plug-n-play connectivity to the switch controller
• Integrated low voltage cutoff (LVCO) battery protection with optional override
• Self-healing fault protection circuits (from 1.5 to 30amps)
• Current-sensing MOSFETs controlled by a microprocessor (no fuses and no relays)
• 50amp auto-resetting circuit breaker
• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket
• Operates on 12VDC
• Built-in Bluetooth capabilities for remote control
• Protection against: overheating, over-current, shorts, reverse polarity and field collapse
• On-demand wireless software updates/upgrades
• 1-year limited warranty

Fab Fours Black Steel Elite Front Bumpers

From $1,919.99

Fab Fours Black Steel Rear Bumpers

From $1,049.99