Fab Fours Premium Front Bumpers

From $1,569.99

• Provides more tire clearance
• Winch ready (Accepts up to 16,500 lb. winches or smaller)
• 3/4 inch D-ring Mounts
• 1/4 inch Boxed mounting system with adjustability to allow a custom fit
• Fab Fours signature injection molded light housings
• Fab Fours 90mm fog and 60mm turn indicator lights included FREE with the bumper
• 2 Stage matte black powder coat or bare steel (-B instead of -1)
• Combination of 1/4 inch and 3/16 inch steel construction
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Vengeance Front Bumpers

From $109.99

• Available in 2 Stage Black Powder Coat or Bare Steel
• Overall design and fit is inchHigh and Tight inch to the contours of the vehicle
• The Vengeance Series front bumper is sensor compatible
• Allows for an integrated 20 inch LED light bar in the center (light bar not included)
• Mounting options on each side for (2) 2x2 Dually lights to give you maximum LED light coverage
• Lower cutout to provide airflow to intercoolers
• Complete bolt-on front bumper w/ provided brackets that tie directly to the frame
• Sensors optimized for vehicles with suspension lifts - stock height trucks may require tuning the sensor mount and will require special care
• Available in a no guard or pre-runner guard option.
• California Residents: WARNING

Fab Fours Premium Rear Bumpers

From $1,029.99

• Bare steel or Black Powder coat
• 3/16 inch steel construction
• Fab Four's signature knife edge and recessed D-Ring mounts
• CB antenna mount
• Compatible with factory receiver hitch
• Tire carrier sold separately
• California Residents: WARNING

Fab Fours Black Steel Front Ranch Bumpers

From $1,609.99

• Combination Pipe and Tread Plate Construction
• Gloss Black Powder Coat or Bare Steel (-B instead of -1)
• Back up lights included
• Pre-drilled sensor holes
• Retains OEM receiver hitch and wiring locations
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Vengeance Rear Bumpers

From $1,049.99

• Available in Bare Steel and Fab Fours 2 Stage Black Powder Coat
• Two front-side openings allow light options
• (4) 2x2 Dually lights or (2) 6 inch light bars (lights are not included)
• 11gauge US Steel Construction
• Sensor compatible
• Retain OEM Receiver Hitch and Wiring Location
• 11gauge US Stee
• Weight: 65 lbs.
• U.S. Steel Construction
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Elite Front Bumpers

From $1,849.99

• Full Replacement Bumper
• Bolt-on Tow Hooks Included
• OE Style ELITE Badge Included
• Light mounts for factory fog lights
• Optional Bolt-On Winch mount For Up 16,500 LB Winches
• Optional Bolt-On 1 inch D-ring Mount
• Made in the USA
• California Residents: WARNING

Fab Fours Winch Mounts

From $1,019.99

• One piece winch mount
• Fully welded
• No parts or brackets to bolt together
• 3/8 inch Steel mounts
• Slips through the factory to hook slots straight to the factory frame
• 2 Stage matte black powder coat or bare steel (-B instead of -1)
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Rock Sliders

From $1,009.99

• Jeep rocker panel semi-gloss textured black powder coat
• Fab Fours signature knife edge theme
• Top surface doubles as entry step
• Stainless fasteners
• Does not limit tire size
• Works with most aftermarket fender flares on the market
• California Residents: WARNING

Fab Fours Rear Ranch Bumpers

From $1,049.99

• Combination Pipe and Tread Plate Construction
• Gloss Black Powder Coat or Bare Steel (-B instead of -1)
• Back up lights included
• Pre-drilled sensor holes
• Retains OEM receiver hitch and wiring locations
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Aero Series Front Bumpers

From $109.99

• Fab Fours' newest Ultra Light Hybrid bumpers: AERO SERIES
• By combining tube and plate steel these premium bumpers are constructed to be lightweight (weighing only 45bs), offer a sleek AEROdynamic design while providing optimal tire clearance
• Engineered to retain factory skid plate and new technology features including Adaptive Cruise Control and Park Assist
• Center Cutout for Rigid Industries 20? LED light bar
• The fit of this bumper is high and tight and perfectly follows the vehicles body lines
• Available in a no guard or pre-runner guard option
• California Residents: WARNING

Synergy Manufacturing High Steer Drag Link

From $450.00

Fab Fours Elite Rear Bumpers

From $1,039.99

• Combination Pipe and Smooth Plate Construction
• Matte Black Powder Coat or Bare Steel (-B instead of -1)
• Pre-drilled sensor holes
• Retains OEM receiver hitch and wiring locations
• 100% Made in the USA
• California Residents: WARNING

Synergy Manufacturing Wheel Spacers

From $110.00

• Wheel hub centric for increased strength (-H part numbers only)
• CNC machined from billet 6061-T6 aluminum
• Features corrosion resistant red anodizing
• Can be used with factory or after market wheels
• Adapters are 1.50" wide
• Includes Loctite
• Sold as a pair

Synergy Manufacturing Ball Joints

From $125.00

Fab Fours Black Steel Front Bumpers

From $149.99

• Combination Pipe and Tread Plate Construction
• Gloss Black Powder Coat or Bare Steel (-B instead of -1)
• Bolt-on tow hooks NOW included
• Light Mounts for Factory Fog Lights
• Optional Bolt-on Winch Mount (Accepts up to 12,000 lb. winches or smaller)
• Optional Bolt-on 1 inch D-ring mounts
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Roof Racks

From $1,069.99

• 48" / 60" / 72" Length Options
• Accommodates (4) 2x2 Square LED Lights
• Optional: (2) 50" Light Bars for the Front and (2) 50" Light Bars for Back *Lights are NOT INCLUDED*
• Optional: 4 Light Roof Rack Face Plate (RR14-1). Houses (4) 2x2 Dually Lights *Lights are NOT INCLUDED*
• Provides Tie-Downs
• Modular design allows mounting wherever necessary
• Integrated Zip-Tie holes for wiring
• Weight Capacity Rated For 60lbs
• Does Not Accommodate for Panoramic Sun Roofs on Ford F-150 and Super Duty Models
• 12 GA (gauge) Steel Construction
• Finish: 2 Stage Black Matte Powder Coat or Bare Steel
• California Residents: WARNING

Fab Fours Headache Racks

From $409.99

• Fab Fours signature knife edge design
• Rear brake visibility
• Accepts Rigid Industries Surface Mount 2x2 Dually Lights
• 100% Made in the USA
• Available in Fab Fours Matte Black Powder Coat or Bare Steel
• California Residents: WARNING

Fab Fours Lifestyle Winch Bumpers

From $2,069.99

• Provides more tire clearance
• Winch ready (Accepts up to 10,000 lb. winches or smaller)
• 3/4 inch D-ring mounts
• 1/4 inch Boxed mounting system with adjustability to allow a custom fit
• Fab Fours' signature injection molded light housings
• Fab Fours' 90mm fog and 60mm turn indicator lights included FREE with the bumper!
• 2 Stage matte black powder coat or bare steel (-B instead of -1)
• 3/16 inch Steel construction
• 100% Made in the USA
• California Residents: WARNING

Fab Fours Side Steps

From $425.99

• 10 inch Large full width stomp pad
• Embossed Fab Fours logo
• Matte black powder coat or bare steel (-B instead of -1)
• 100% Made in the USA
• California Residents: WARNING

Synergy Manufacturing Tie Rods

From $350.00

Synergy Manufacturing Axle Housing Inner Sleeve Kit

From $150.00

• Designed to increase the strength of the front Axle housing which is prone to bending when larger off road tires are installed and used off road
• Inner Axle Sleeves add a 57% increase in strength over stock
• The stock axle housing must be drilled and plug welded for installation
• California Residents: WARNING

Synergy Manufacturing Skid Plates

From $1,335.00

• Jeep skid plates manufactured from 3/16" crush resistant Grade A-572 Steel plate
• Flush mounted hardware provides a 100% smooth skid surface
• Premium powdercoat finish for maximum corrosion resistance
• Allows access to drain plug without removal
• Made in the USA
• California Residents: WARNING

Fab Fours Ranch Winch Trays

From $189.99

• Universal to all Black Steel 1/2 ton bumpers
• 1/2 inch and 1/4 inch plate steel
• Pre-drilled for the WARN winch remote relocation kit (WARN part# 14867)
• California Residents: WARNING

Synergy Manufacturing Tie Rod Clamps

From $100.00

• CNC machined from 1020 DOM material
• 100% bolt on
• Zinc plated for corrosion resistance
• Made in the U.S.A
• California Residents: WARNING