G2 Axle & Gear Replacement Axle Kits

From $115.49

• Axle upgrade engineered to withstand the additional load of high-torque applications
• Stronger than factory
• Comes with full manufacturer warranty
• California Residents: WARNING

G2 Axle & Gear Master Ring and Pinion Installation Kits

From $116.99

• G2 ring and pinion installation kit
• Includes Timken bearings, ring gear bolts, shims to set pinion and carrier bearing preloads, pinion seal and pinion nut
• California Residents: WARNING

G2 Axle & Gear Dana 44 JK Ring and Pinion Sets

From $103.50

• Dana 44 JK Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

Fabtech Basic Lift Systems

From $1,061.19

• Front Lift: Crossmember & Steering Knuckles
• Rear Lift: Lift Blocks with U-Bolts
• Includes: Lower control arm eccentric cams, sway bar drop brackets and more
• Shocks: Front & Rear Twin Tube Performance Shocks
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

G2 Axle & Gear Ring and Pinion Sets

From $108.00

• Engineered and manufactured to handle increased load
• Forged from high-strength 8620 Steel
• Precision-machined to OE specifications for perfect mesh
• Tight tolerances ensure easy set up and quiet OE-like operation
• Double-lapped and shot-peened for improved longevity
• Heat-treated for added durability
• Wide application range from
• Full 10-year warranty
• California Residents: WARNING

G2 Axle & Gear Hammer Differential Covers

From $119.99

• G2 aluminum differential covers are designed to not only protect your ring & pinion, they are designed to help cool your gear oil for prolonged bearing life. Made from high strength heat treated aluminum to withstand direct hits, these covers help protect your investment while adding a distinct look to your vehicle.
• California Residents: WARNING

Fabtech Radius Arm Systems

From $1,711.42

• Full Tubular Structure Strengthened by dimple die side plates
• Installation Hardware Included
• Includes Replacement Coil Springs
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

G2 Axle & Gear Brute Differential Covers

From $140.00

Fabtech 4 Link Lift Kits

From $2,308.47

• The 4 Link design provides the best ride, best handling, and the most articulation and suspension travel overall
• While there are other long arm, 3 link, radius arm systems on the market, these do not provide the reduced caster change and useable articulation on a JK, with the factory gas tank, that a Fabtech 4 Link long arm system can
• California Residents: WARNING

G2 Axle & Gear Placer Gold Series Axles

From $104.00

• G/2s new made in the U.S.A. Placer Gold Series axles are an even stronger axle option for Jeep JK Wrangler owners. These new American made axles use high quality 4340 chromoly steel and feature a stronger forging with more material in critical areas.
• California Residents: WARNING

Fabtech Performance Lift Kits

From $1,182.91

• Allows use of stock tires & wheels
• No driveshaft change required for AutoTrac models
• Crossmembers constructed of heavy 1/4” thick plate steel
• Solid steel billet sway bar end links
• Includes 1/4” thick steel differential skid plate
• Tubular impact struts included
• Retains factory steering centerlink & upper control arms in stock location
• California Residents: WARNING

G2 Axle & Gear Dana 30 JK Ring and Pinion Sets

From $131.99

• Dana 30 JK Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

Fabtech Budget Lift Kits

From $1,031.63

• 2 Retains factory front coil springs for a like stock ride
• Radius Arm drop brackets provide proper caster with the increased ride height
• Trac Bar is relocated to center axle under vehicle and work with the factory Pitman Arm
• Includes driveshaft carrier bearing spacer for smooth driveline operation
• Front bump stops are relocated to control suspension travel
• Performance Shocks provide a quality ride with extended durability compared to stock shocks
• Allows use of 35” tall tires with required fenderwell trimming
• California Residents: WARNING

G2 Axle & Gear Dana 44 Ring and Pinion Sets

From $118.24

• Dana 44 Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear Dana 30 Ring and Pinion Sets

From $109.99

• Dana 30 Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

Fabtech Dirt Logic 2.25 Inch Shocks

From $2,072.84

• Dirt Logic 2.25
• Shock Absorber
• Stainless Steel
• Black
• California Residents: WARNING

Fabtech Performance Shocks

From $165.74

• Performance Gas Shock
• 9/16 inch Chrome Hardened Piston Rod
• 1 3/8 inch OD Piston
• Closed Cell Foam Insert
• High Flow 9 Stage Valving.
• California Residents: WARNING

G2 Axle & Gear Drive Shafts

From $330.00

• Heavy-Duty 1 Ton Upgrade
• Made from heavy duty D.O.M. Tubing for strength
• Includes larger solid-body 1350 Series U-Joints for durability
• Dynamically balanced to eliminate vibration
• California Residents: WARNING

G2 Axle & Gear Core 44 Rear Bare Housings

From $900.00

• American-made CORE 44 housings
• Feature forged bearing caps
• G-lock adjuster nut system to set backlash and carrier bearing preload
• Additional ribbing on the cast center section
• California Residents: WARNING

G2 Axle & Gear Chrysler 8.25" Ring and Pinion Sets

From $104.00

• Chrysler 8.25 Inches Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear Birfield Axles

From $110.49

• G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
• California Residents: WARNING

G2 Axle & Gear Pinion Yokes

From $44.99

• G2 Axle and Gear offers multiple high quality Pinion Flanges and yokes for various applications with increased strength and reliability. Many of the G/2 yokes are equipped to uses the stronger and popular U-Bolt style mounting that is preferred by racers and off roaders alike.
• California Residents: WARNING

G2 Axle & Gear Dana 35 Ring and Pinion Sets

From $115.49

• Dana 35 Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

Fabtech Stealth Monotube Shocks

From $100.43

• Stealth Monotube Shock Absorber
• Sold Individually
• California Residents: WARNING