TeraFlex Rear Axle Bracket Kit

From $19.99

• The TeraFlex JK rear CRD60 axle bracket kit includes all axle brackets necessary for a complete JK rear end
• Sold as a complete kit, raw steel is ready for welding and paint or powder coating
• This kit includes two lower coil spring pads, two lower control mounts, two upper control arm mounts (with integrated swaybar mounts), two shock mounts, and a trackbar mount
• This axle kit is designed for Dana 60 axles with 3" diameter axle tube. Welding is required
• California Residents: WARNING

TeraFlex Transfer Case Lowering Kit

From $39.99

• The TeraFlex transfer case lowering kit lowers the transfer case to reduce driveshaft vibration caused by increased ride height
• This is especially useful for Jeeps that have not installed a slipe yoke eliminator kit
• California Residents: WARNING

TeraFlex Hats

From $31.99

• Many sizes and colors to choose from
• California Residents: WARNING

TeraFlex FlexArm

From $216.99

• FlexArm can be added to any existing suspension lift
• FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length
• California Residents: WARNING

TeraFlex Tera44 Rubicon Locker Sensor and Actuator Plug Kit

From $32.99

• TeraFlex R44/Rubicon Dana 44 Locker Sensor and Actuator Plug Kit is for use in Front Teraflex R44 and Factory Rubicon Dana 44 axle housings that will be using an aftermarket locker
• Requires the factory electronic locker holes to be blocked
• The locker sensor plug included in this kit is machined to accept the ARB airline bulkhead for a clean and easy install with no drilling through your axle housing required
• It also conveniently accepts the rubber grommet used by the E-Locker, with the same perks as the ARB install
• This kit has you covered for whichever aftermarket locker you choose
• It includes the sensor plug, actuator plug, O-rings, and hardware
• California Residents: WARNING

TeraFlex Revolver Crush Cushion

From $7.99

• Replace your worn Revolver Shackle components, and restore complete functionality
• The UHMW nylon cushion keeps the Revolver shackle properly positioned when folded in the closed/resting position
• Sold Individually
• California Residents: WARNING

TeraFlex FlexArm Tube

From $186.99

• TeraFlex offers standard lengths of FlexArm tubing pre-tapped for our large Monster ends
• These can be used for custom suspension links or torque arms
• Tube length is measured as the actual length of tube
• California Residents: WARNING

TeraFlex FlexArm Mount

From $117.99

• Weld on Brackets for FlexArm control arms
• California Residents: WARNING

TeraFlex Dana 60 Axle Assemblies

From $3,582.99

• Maximum Ground Clearance
• Adjustable Control Arm And Track Bar Mounting Locations
• Comes complete with properly matched components
• Ultra-reliable package that exceeds stock axle performance, durability and reliability
• California Residents: WARNING

TeraFlex Steering Stabilizer Relocation Kits

From $84.99

• Moves stabilizer up nearly 2.5
• California Residents: WARNING

TeraFlex Wheel Spacers

From $189.99

• Wheel Spacer
• The wheel adapter will provide a 1.25" offset for factory wheels for additional tire clearance when turning
• The wheel spacer is not intended for wheels wider than 8" or aftermarket wheels with less than 4" of backspacing
• Sold in Pairs
• California Residents: WARNING

TeraFlex Sway Bar Bushing Kit

From $16.99

• This TeraFlex Bushing Ball Replacement Kit is designed to serve as direct replacements for the TeraFlex brand quick disconnect swaybar link bushings
• The polyurethane bushings are specifically designed for easy replacing
• California Residents: WARNING

TeraFlex Base Lift Kits

From $1,043.99

• Depending On Lift Height And Vehicle Model Kits Typically Include:
• Dropped Pitman Arm
• Front Sway Bar Disconnects
• Rear Sway Bar Links
• Rear Track Bar Bracket
• Bump Stops
• Brake Line Extension Brackets
• All Necessary Hardware
• California Residents: WARNING

TeraFlex Falcon SP2 3.3 Fast Adjust Piggyback Shock Sets

From $1,618.19

TeraFlex Sport ST3 Suspension Systems

From $1,398.96

• Delivers True Street & Trail (S/T) Performance
• Install & Drive Simple Bolt-On Installation
• Dependable Performance With Zero Worries
• Positive, Responsive Handling
• Reduced Vibration & Harshness
• Preset Sport Flexarms Optimize Correct Caster & Pinion Angles For 3” Lift Kits
• High Quality, Factory Style Bushings Provide Excellent Vibration Damping & Ride Quality With Zero Maintenance
• Front Heavy Duty Adjustable Track Bar
• Speedbump Progressive Bump Stops
• Full Range Of Movement For Off-Road Flex & Articulation
• No Alignment Or Adjustment Required
• Teraflex Lifetime Warranty
• Fits Up To 35” Tires
• California Residents: WARNING

TeraFlex Nomad Wheel Rash Ring

From $40.99

• Fits TeraFlex Nomad wheels
• Black polyethylene thermoplastic with UV inhibiters to resist color fading
• Secures with locking lugs on ring

TeraFlex Brake Rotors

From $135.99

• Brake rotor is mill balanced and machined for the internal parking brake
• Replacement slotted rotor is a direct replacment
• Mill-balanced, vented and slotted rotor provides greater braking leverage to allow stopping distance to be decreased substantially and decreases heat buildup
• California Residents: WARNING

TeraFlex Falcon 1.1 Monotube Shocks

From $115.00

TeraFlex Rubber Bushings

From $21.99

• The TeraFlex TJ rear upper small FlexArm rubber Joint provides excellent off-road capabilities with articulation and durability
• The rubber bushing provides superior vibration damping, reduces road noise, eliminates clunks, and maintains proper position for maximum articulation during travel
• Sold Individually
• California Residents: WARNING

TeraFlex Tera30 HD Axle Assemblies

From $2,620.99

• 3.25” O.D. x 0.25” wall axle tube increases torsional strength to resist bending with minimal weight increase
• Asymmetric housing design for extra-long tube side strength
• Pre-installed inner axle seals
• HD forged inner knuckles with greater upper and lower section strength
• Ductile cast iron housing with increased rib gussets
• HD ductile iron differential cover
• Smooth radius bottom design to glide over rocks and obstacles
• Integrated lower control arm skid plates
• High-flow oil passages and bottom oil drain hole for simple fluid changes
• Reinforced front track bar mount (ties into spring pad) for greater strength
• UV protected triple-stage powder coat for corrosion resistance
• 1/4”-thick CNC laser cut axle brackets for extreme strength
• Integrated factory location upper control arm mount
• Pre-installed upper control arm bushings
• Proper pinion angle for lifted applications
• Pre-tapped hole on spring perch for bump stop extensions
• Pre-drilled holes for limit straps and lower spring retainers
• Retains all ESP, ABS, and speedometer sensor capability
• 100% engineered, designed, and built in the USA with new components

TeraFlex Tera44 HD Axle Assemblies

From $2,974.99

• 3.25” O.D. x 0.25” wall axle tube increases torsional strength to resist bending with minimal weight increase
• Asymmetric housing design for extra-long tube side strength
• Pre-installed inner axle seals
• HD forged inner knuckles with greater upper and lower section strength
• Ductile cast iron housing with increased rib gussets
• HD ductile iron differential cover
• Smooth radius bottom design to glide over rocks and obstacles
• Integrated lower control arm skid plates
• High-flow oil passages and bottom oil drain hole for simple fluid changes
• Reinforced front track bar mount (ties into spring pad) for greater strength
• UV protected triple-stage powder coat for corrosion resistance
• 1/4”-thick CNC laser cut axle brackets for extreme strength
• Integrated factory location upper control arm mount
• Pre-installed upper control arm bushings
• Proper pinion angle for lifted applications
• Pre-tapped hole on spring perch for bump stop extensions
• Pre-drilled holes for limit straps and lower spring retainers
• Retains all ESP, ABS, and speedometer sensor capability
• 100% engineered, designed, and built in the USA with new components

TeraFlex Sport ST2 Suspension Systems

From $1,201.96

• Delivers True Street & Trail (S/T) Performance
• Install & Drive Simple Bolt-On Installation
• Dependable Performance With Zero Worries
• Positive, Responsive Handling
• Reduced Vibration & Harshness
• Preset Front Lower Sport Flexarms Optimize Correct Caster & Pinion Angles
• High Quality, Factory Style Bushings Provide Excellent Vibration Damping & Ride Quality With Zero Maintenance
• Speedbump Progressive Bump Stops
• No Alignment Or Adjustment Required
• Teraflex Lifetime Warranty
• Fits Up To 35” Tires
• California Residents: WARNING

TeraFlex Alpine CT2 Suspension Systems

From $2,534.94

• Available with or without shocks
• Adjustable Alpine Control Arms balance front caster angle and pinion angles
• Optimize rear pinion angles on 0-4.5” lift kits
• Delivers true Cross-Trail (CT) performance
• Dependable performance with zero worries
• Positive, responsive handling with reduced NVH
• High-quality, maintenance-free factory-style bushings provide excellent vibration damping and ride quality
• Falcon Progressive Front & Rear Bump Stops provide progressive compression during high-speed suspension movement
• Adjustable Alpine IR Front Track Bar and Front (3.5”+) and Rear Track Bar Brackets improve steering response, center axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
• Full range of movement for off-road flex and articulation
• Install and drive simple bolt-on installation – no welding required
• TeraFlex Lifetime Warranty
• Requires aftermarket wheels with 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels – NOT INCLUDED

TeraFlex Alpine RT2 Short Arm Suspension Systems

From $3,721.93

• TeraFlex Alpine RT (Rogue Trail) Suspension Systems build on our already capable Alpine CT (Cross-Trail) Suspension Systems
• These systems include all our top-of-the-line components
• Alpine RT Suspension Systems are for the Jeeper who wants it all!
• California Residents: WARNING