Universal Fit Front

95 Product Groups

Switch to View Products

SORT BY

Stage 8 Locking Spindle Nut Kit

From $100.99

Stage 8 Locking Systems offers the opportunity to restore the dependability of Dana 44 and Dana 60 front assemblies with these Stage 8 X-Lock locking spindle nuts. These patented locking spindle nuts are guaranteed to never loosen, even under the most extreme conditions. The X-Locks were developed for the rugged life of competitive off-road vehicles. Any vehicle with Dana 44 and Dana 60 front assemblies can be retrofitted with the X-Locks for dependable, long service life and save thousands in repair dollars. Stage 8 X-Locks are laser-cut from 4130 steel and can be easily installed without any special tools. X-Locks are heat-treated and through-hardened and will maintain bearing preload value. They can be easily locked within 1/2 degree of any position.
California Residents: WARNING

From $100.99

4.1 4.1 (8)

TeraFlex Differential Covers

From $173.99

Designed to offer extreme protection from rocks, obstacles and other debris on the trail
Covers are cast from the same high-strength ductile-iron as our their axle housings
Features a large diameter fill tube/inspection port at the top to accommodate a funnel or gear oil bottle pour spout
Fluid level port doubles as a mid-height inspection port
California Residents: WARNING

From $173.99

5.0 5.0 (1)

Dana Spicer Differential Covers

From $188.99

Front Or Rear Axles
New Gasket
New Mounting Hardware
California Residents: WARNING

From $188.99

3.5 3.5 (32)

Dana Spicer Spindle Bearing Seal Kits

From $12.99

Spindle Bearing Seal Kits
Dana 30 and dana 44
Includes inner spindle bearing, v-lip seal, nylon thrust washer, and stub axle seal
California Residents: WARNING

From $12.99

4.2 4.2 (5)

Motive Gear Ring and Pinion Sets

From $238.11

Ring and Pinion Sets
Stock performance ring and pinions
Easy setup, superior strength, quality, and a vast ratio selection
Backed by rigid quality control processes
2 year / 100,000 mile no-nonsense warranty
California Residents: WARNING

From $238.11

3.8 3.8 (140)

Alloy USA Ring And Pinion Gear Sets

From $199.99

Fits Most Front And Rear Axles
Machined On Precision Gleason Machines
High Quality 8620 Forgings
Heat Treated
3 Year Warranty
California Residents: WARNING

From $199.99

5.0 5.0 (16)

Dana Spicer Dana 30 Axle Shaft Assemblies

From $1,107.99

Dana Spicer Dana 30 Axle Shaft Assemblies are ultrasonically tested for unparalleled reliability.
Spicer parts are designed, engineered, and manufactured to meet or exceed OE requirements because they are OE parts, ensuring a perfect fit with our full line of industry-leading axles.
Spicer Dana 30 Axle Shaft Assemblies are heat treated and cold formed rolled to ensure a much more consistent and stronger axle shaft.
Spicer axle shafts undergo fatigue testing and ultrasonic testing, delivering a safety factor that’s high even by OE standards.
California Residents: WARNING

From $1,107.99

5.0 5.0 (2)

Dana Spicer Dana 44 Axle Shaft Assemblies

From $118.99

Dana Spicer Dana 44 Axle Shaft Assemblies are ultrasonically tested for unparalleled reliability.
Spicer parts are designed, engineered, and manufactured to meet or exceed OE requirements because they are OE parts, ensuring a perfect fit with our full line of industry-leading axles.
Spicer Dana 44 Axle Shaft Assemblies are heat treated and cold formed rolled to ensure a much more consistent and stronger axle shaft.
Spicer axle shafts undergo fatigue testing and ultrasonic testing, delivering a safety factor that’s high even by OE standards.
California Residents: WARNING

From $118.99

4.0 4.0 (12)

Dana Spicer Dana 44 Spindle Nut With Pin

From $15.99

Dana 30/44/GM 10 Bolt Spindle Nut
Inner Nut With Pin
California Residents: WARNING

From $15.99

Rancho RockGEAR Differential Covers

From $168.31

Thick Cast Ductile Iron
Durable Red Powder -coat Finish
Added Axle And Internal Gear Protection
Ribbed External Cunstruction For Added Strength
Off-Set Over-Sized Fill Plug For increased Fluid Capacity And Easier/Quicker Filling
California Residents: WARNING

From $168.31

3.5 3.5 (2)

Dana Spicer Steering Knuckle Bearing and Seal Sets

From $63.99

Kit Includes Lower King Pin Seal
Lower Bearing Race
Lower Bearing
Bearing Cap
Upper King Pin Seal
Single Side
California Residents: WARNING

From $63.99

G2 Ring and Pinions

From $100.00

G2 Axle & Gear Ring and Pinion
Engineered and manufactured to handle increased load
Forged from high-strength 8620 Steel
Precision-machined to OE specifications for perfect mesh
Tight tolerances ensure easy set up and quiet OE-like operation
Double-lapped and shot-peened for improved longevity
Heat-treated for added durability
Wide application range from
Full 10-year warranty
California Residents: WARNING

From $100.00

Dana Spicer Dana 30 Open Differential Internal Kits

From $136.99

The Dana Spicer Open Differential Internal Kits are forged to ensure greater strength and durability
Spicer internal gear kits offer a phosphate coating on the cross shaft and a statistically controlled heat treating
Dana Spicer open differential internal kits replace all of the internal components of your standard open differentials
These kits will eliminate clunking caused by worn spider gears and tighten up those sloppy differentials
California Residents: WARNING

From $136.99

Dana Spicer Axle Lower King Pin

From $47.99

Bolts To Bottom Of Knuckle
Single Side Only
California Residents: WARNING

From $47.99

Dana Spicer Outer Axle Dust Shields

From $3.99

The Dana Spicer Outer Axle Dust Shield is for use with Dana Spicer front axles
The Dana Spicer Outter Axle Dust Shield is used to help prevent dirt and debris from getting to the spindle seals and contaminating the grease which will cause damage to the bearings
California Residents: WARNING

From $3.99

3.5 3.5 (6)

Alloy USA HD Differential Covers

From $110.35

Manufactured From 5/16in. Cast Steel
Painted Inside And Out
California Residents: WARNING

From $110.35

4.6 4.6 (14)

Dana Spicer Steering Knuckle Cone Bushings

From $19.99

Nylon Bushing Rides On Upper King Pin
Single Side Only
California Residents: WARNING

From $19.99

5.0 5.0 (2)

Dana Spicer Differential Crush Sleeves

From $3.99

Crush Sleeves
Maintains Proper Pinion Bearing Preload
Direct replacement
For most late model axles equipped with factory crush sleeves
California Residents: WARNING

From $3.99

5.0 5.0 (1)

Dana Spicer Dana 44 Inner Pinion Bearing Baffle

From $2.99

Dana Spicer Dana 44 Inner Pinion Bearing Baffle is for use in all high pinion Dana 44 axles
The Inner Pinion Bearing Baffle installs behind the inner pinion bearing race/cup with shim pack
The Dana Spicer Dana 44 Inner Pinion Bearing Baffle allows oil to pool to insure lubrication for the outer pinion bearing
California Residents: WARNING

From $2.99

5.0 5.0 (1)

Dana Spicer Inner Spindle Nuts

From $17.99

Dana 60 Spindle Nut
Inner Nut With Pin
Services One Side Only
California Residents: WARNING

From $17.99

5.0 5.0 (2)

Motive Gear Axle Shaft Assemblies

From $706.99

Front Axle Shaft Assembly
Direct replacements for original equipment Jeep axle shafts without modifications
Made from quality materials and heat treated for strength and durability
Fits multiple Jeep models
California Residents: WARNING

From $706.99

Dana Spicer Axle King Pin Gaskets

From $1.99

Fits Upper and Lower: Sold Individually
California Residents: WARNING

From $1.99

5.0 5.0 (1)

Dana Spicer Outer Spindle Nuts

From $12.99

Dana 60 Spindle Nut
Inner Nut With Out Pin
Services One Side Only
California Residents: WARNING

From $12.99

Dana Spicer Dana 30 Inner Pinion Bearing Baffle

From $1.99

Dana Spicer Dana 30 Inner Pinion Bearing Baffle is for use in all high pinion Dana 30 Axles
The Dana 30 Inner Pinion Bearing Baffle installs behind inner pinion bearing race with shim pack
Inner Pinion Bearing Baffle allows oil to pool to insure lubrication for outer pinion bearing
California Residents: WARNING

From $1.99

4.0 4.0 (4)