Icon Alloys Compression Satin Black Wheels

From $271.99

• Sizes Available: 17", 18", 20"
• Bolt Patterns: 5, 6 lug
• Finish: Satin Black
• Max Load: 2750 lbs

G2 Axle & Gear Replacement Axle Kits

From $115.49

• Axle upgrade engineered to withstand the additional load of high-torque applications
• Stronger than factory
• Comes with full manufacturer warranty
• California Residents: WARNING

G2 Axle & Gear Master Ring and Pinion Installation Kits

From $121.50

• G2 ring and pinion installation kit
• Includes Timken bearings, ring gear bolts, shims to set pinion and carrier bearing preloads, pinion seal and pinion nut
• California Residents: WARNING

G2 Axle & Gear Ring and Pinion Sets

From $181.99

• Engineered and manufactured to handle increased load
• Forged from high-strength 8620 Steel
• Precision-machined to OE specifications for perfect mesh
• Tight tolerances ensure easy set up and quiet OE-like operation
• Double-lapped and shot-peened for improved longevity
• Heat-treated for added durability
• Wide application range from
• Full 10-year warranty
• California Residents: WARNING

G2 Axle & Gear Hammer Differential Covers

From $80.00

• G2 aluminum differential covers are designed to not only protect your ring & pinion, they are designed to help cool your gear oil for prolonged bearing life. Made from high strength heat treated aluminum to withstand direct hits, these covers help protect your investment while adding a distinct look to your vehicle.
• California Residents: WARNING

G2 Axle & Gear Placer Gold Series Axles

From $104.00

• G/2s new made in the U.S.A. Placer Gold Series axles are an even stronger axle option for Jeep JK Wrangler owners. These new American made axles use high quality 4340 chromoly steel and feature a stronger forging with more material in critical areas.
• California Residents: WARNING

G2 Axle & Gear Birfield Axles

From $110.49

• G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
• California Residents: WARNING

G2 Axle & Gear GM 12 Bolt Ring and Pinion Sets

From $369.99

• GM 12 Bolt Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

ICON Vehicle Dynamics Front Control Arm Link Kits

From $1,049.95

• Billet and tube styles
• Fits various makes
• Sold in sets
• California Residents: WARNING

ICON Vehicle Dynamics Six Speed Series Aluminum Wheels

From $288.99

• Available in 17 inch diameter
• Choose from Satin Black, Gun Metal or Satin Black Machined finish
• Application-specific dimensions optimize vehicle dynamics and tire clearance
• Reduced unsprung weight and rotating mass improves on and off-road vehicle performance
• Aluminum alloy construction provides strength properties that are well suited for off-road use
• California Residents: WARNING

ICON Vehicle Dynamics Stage 4 Suspension Systems

From $12,898.43

• Dual-rate coil springs front and rear guaranteed never to sag
• Stainless steel high-steer taper adapter eliminates drilling the factory knuckle
• Out-handles most JK kits on the market both on and off-road
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

G2 Wheel Bearing Kits

From $41.99

• G2 Axle and Gear Wheel Bearing Kits provide you with the necessary items to replace your front or rear wheel bearings.
• California Residents: WARNING

ICON Vehicle Dynamics Stage 5 Suspension Systems

From $3,202.75

• Dual-rate coil springs front and rear guaranteed never to sag
• Stainless steel high-steer taper adapter eliminates drilling the factory knuckle
• Out-handles most JK kits on the market both on and off-road
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

G2 Axle & Gear Dana 44 Rear Coil Buckets

From $45.00

• Rear coil buckets for 68-2052-1
• Heavy-duty steel construction
• Unpainted
• Welding-required
• California Residents: WARNING

ICON Vehicle Dynamics V.S. 2.0 Aluminum Series Shocks

From $1,094.95

• Vehicle Specific Shocks
• Nitrogen Charged Monotube Design with Remote Reservoir (Available Depending On Application)
• California Residents: WARNING

ICON Vehicle Dynamics 2.5 Inch Dual Rate Coil-Spring Kits

From $439.95

• Designed to improve your ride quality and handling
• The progressive spring rates maintain a plush street ride and excellent performance off-road
• ICON engineered dual rate coil springs
• Less body roll than stock
• California Residents: WARNING

ICON Vehicle Dynamics 1.5 inch Lift Rear Expansion Pack

From $245.95

• Add a Leaf Kit comes complete with U-bolts and Center pins for an easy install
• Improved ride quality
• Increased wheel travel
• Maintains factory load & towing capacities
• Actual lift heights may have a slight variance based on year, make, and model
• California Residents: WARNING

ICON Vehicle Dynamics Extended Travel Front Coilover Shock Kits

From $1,459.95

• Adjustable ride height
• Race shock piston with flutter stack compression valving
• 5/8" PTFE-lined spherical bearing
• Completely re-buildable
• Chrome-silicon spring
• 250 PSI nitrogen-charged internal reservoir
• Nitro-steel shaft will not chip or rust like chrome
• California Residents: WARNING

ICON Vehicle Dynamics Extended Travel Remote Reservoir Front Coilover Shock Kits

From $1,802.45

• Adjustable ride height
• Race shock piston with flutter stack compression valving
• 5/8" PTFE-lined spherical bearing
• Hose length optimized for increased fluid transfer
• Mounting bracket orients reservoir for optimum tire clearance
• External reservoir ensures maximum cooling
• Chrome-silicon spring
• 250 PSI nitrogen-charged internal reservoir
• Nitro-steel shaft will not chip or rust like chrome shafts
• California Residents: WARNING

ICON Vehicle Dynamics Coil Spring Kits

From $2,214.65

• Easy install makes for a simple and cost effective upgrade
• Multi-rate coil allows for exceptional ride quality whether loaded down or empty
• Great option for aggressive drivers as second rate will help reduce bottom-out
• Eibach-manufactured coil spring guaranteed for life against sagging and breaking
• California Residents: WARNING

ICON Vehicle Dynamics Upper Control Arms

From $1,029.95

ICON Vehicle Dynamics Coilover Conversion Systems

From $1,499.95

• Adjustable ride height
• Increased wheel travel over stock
• Made in the USA
• Multiple Lift Kits for Jeeps available
• California Residents: WARNING

ICON Vehicle Dynamics V.S. 2.5 Series Piggyback Reservoir Shocks

From $1,068.99

• ICON V.S. 2.5 Series Shocks Are Sold In Pairs
• ICON’s Internal “Bump Zone” Increases Damping By 20% To Provide More Control As The Shock Approaches Full Compression
• Remote Reservoir Design Improves Heat Dissipation To Reduce Shock Fade During Prolonged Use
• Premium Grade 5WT Shock Oil For Consistent Suspension Damping Along A Wide Temperature Range
• Nitrogen Charged Monotube Design With Piggyback Reservoir
• One Piece Digressive Piston Design With Vehicle Specific Valving For Unsurpassed Performance And Ride Quality On And Off-Road
• 7/8” Diameter Induction Hardened, Chrome Plated Shock Shaft
• PTFE Lined Spherical Bearings And Application Specific Mounting Hardware
• 6061 Aircraft Grade Aluminum CNC Machined Components
• CAD Plated, Precision Machined 1026 DOM Steel Shock Body For Maximum Durability And Corrosion Resistance
• 100% Rebuildable
• 100% Revalveable
• Made In The U.S.A.
• All ICON 2.5 Series Piggyback And Remote Reservoir Shocks Can Be Upgraded To ICON’s Compression Damping Control Valve (CDCV)
• California Residents: WARNING

ICON Vehicle Dynamics 2.0 Aluminum Series Remote Reservoir Rear Shocks

From $1,124.95

• Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
• Nitrogen charged monotube design with remote reservoir
• 5/8? chrome plated hardened steel shaft resists corrosion and pits
• 6061 aluminum rod end, top cap, and internals ensure strength and durability
• Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
• Application-specific reservoir mounting hardware
• 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
• California Residents: WARNING