G2 Wheel Bearing Kits

From $41.99

• G2 Axle and Gear Wheel Bearing Kits provide you with the necessary items to replace your front or rear wheel bearings.
• California Residents: WARNING

G2 Axle & Gear Dana 44 Rear Coil Buckets

From $45.00

• Rear coil buckets for 68-2052-1
• Heavy-duty steel construction
• Unpainted
• Welding-required
• California Residents: WARNING

G2 Axle & Gear U-Joint Full Circle Snap Rings

From $0.80

• Fur Use With 5-760x Series U-Joint
• For Use With Aftermarket Axle Shafts
• Factory Shafts Will Require Machining
• Will WorkWith GM 10 Bolt Axles
• Single Snap Ring Only Qty 4 Required To Install 1 U Joint
• California Residents: WARNING

G2 Axle and Gear Retro T-Shirts

From $13.29

• Available in sizes Medium through 3XL
• Gray
• 100% cotton
• Retro design
• California Residents: WARNING

MagnaFlow Performance Stainless Steel Mufflers

From $107.00

• Delivers a Smooth, Deep Tone
• 100% Stainless Steel
• Mufflers are Bi-Directional
• Lifetime Warranty
• California Residents: WARNING

G2 Axle & Gear Emergency Brake Cables

From $31.99

• Designed and constructed using quality materials
• Moderate bolt on installation
• Designed to fit left or right side for easy application
• Emergency Brake Cable Kit is the final piece you'll need to complete a G2 Disc Brake Kit
• California Residents: WARNING

MagnaFlow Performance Exhaust Tips

From $10.99

• MagnaFlow Performance Exhaust Tips are constructed from the highest quality 304 stainless steel
• The long lasting high luster polish lasts longer than most chrome plating
• All MagnaFlow Performance Exhaust Tips are available in either single or double walled construction and features clamp on or weld on installation
• California Residents: WARNING

G2 Axle & Gear Differential Crush Sleeves

From $42.69

• A Crush Sleeve is designed to maintain pinion preload to keep from burning out your pinion bearings.
• California Residents: WARNING

MagnaFlow Exhaust Universal California Catalytic Converter

From $327.00

• These days, the DIY, or do-it-yourself crowd is all about creating custom work and one-off exhausts are no exception. Whether you're working on a classic car, race car or just your daily driver, a MagnaFlow universal converter should be the standard building block for your custom exhaust. Each converter is built to last with its ribbed design and funneled inlets and outlets, as well as a stainless steel body and heat shield that contain a flow efficient, monolithic honeycomb catalyst designed for maximum flow and surface area. Another great characteristic of MagnaFlow's universal converters is that each part number covers a wide range of applications so one converter will work on a variety of makes and models. Since these items are universal, some modifications may be involved such as cutting or welding.
• California Residents: WARNING

G2 Ring and Pinions

From $100.00

• G2 Axle & Gear Ring and Pinion
• Engineered and manufactured to handle increased load
• Forged from high-strength 8620 Steel
• Precision-machined to OE specifications for perfect mesh
• Tight tolerances ensure easy set up and quiet OE-like operation
• Double-lapped and shot-peened for improved longevity
• Heat-treated for added durability
• Wide application range from
• Full 10-year warranty
• California Residents: WARNING

G2 Axle Berfield CV Clip

From $1.79

• For Use With Factory And After Market Axle Shafts
• Retaines Axle Shaft To Berfiels Style CV Joint
• One Clip Only
• California Residents: WARNING

MagnaFlow Exhaust Aluminized Steel Mufflers

From $134.00

• XL 3 Chamber Satin Stainless Steel Muffler
• Type Of Muffler: Chambered
• Inlet Location: Offset
• Outlet Location: Offset
• Muffler Material: Stainless Steel
• Number of Inlets: 1
• Number of Outlets: 1
• Muffler Shape: Oval
• California Residents: WARNING

MagnaFlow Exhaust Metallic-Cat Universal Spun Metallic Catalytic Converter

From $1,053.00

• These days, the DIY, or do-it-yourself crowd is all about creating custom work and one-off exhausts are no exception. Whether you're working on a classic car, race car or just your daily driver, a MagnaFlow universal converter should be the standard building block for your custom exhaust. Each converter is built to last with its ribbed design and funneled inlets and outlets, as well as a stainless steel body and heat shield that contain a flow efficient, monolithic honeycomb catalyst designed for maximum flow and surface area. Another great characteristic of MagnaFlow's universal converters is that each part number covers a wide range of applications so one converter will work on a variety of makes and models. Since these items are universal, some modifications may be involved such as cutting or welding.
• California Residents: WARNING

MagnaFlow Direct-Fit Muffler Kits

From $411.00

• Muffler Kits
• Direct-Fit
• 409 Stainless Steel Construction
• Mirror Finish Polished Stainless Steel Muffler
• Mirror Finish Polished Clamp-on Stainless Steel Tip
• Lifetime Warranty
• Made in USA
• California Residents: WARNING

MagnaFlow Exhaust 95500 Series Large Oval OBDII Compliant Universal Catalytic Converter

From $1,345.00

• These days, the DIY, or do-it-yourself crowd is all about creating custom work and one-off exhausts are no exception. Whether you're working on a classic car, race car or just your daily driver, a MagnaFlow universal converter should be the standard building block for your custom exhaust. Each converter is built to last with its ribbed design and funneled inlets and outlets, as well as a stainless steel body and heat shield that contain a flow efficient, monolithic honeycomb catalyst designed for maximum flow and surface area. Another great characteristic of MagnaFlow's universal converters is that each part number covers a wide range of applications so one converter will work on a variety of makes and models. Since these items are universal, some modifications may be involved such as cutting or welding.
• California Residents: WARNING

MagnaFlow Exhaust Direct Fit California OBDII Catalytic Converter

From $1,029.00

• Designed with ease of installation in mind, MagnaFlow's direct-fit converters are the perfect compliment to your OEM exhaust system. With no welding, cutting or bending required, you can easily add one of our direct-fit converters to your vehicle when it's time to replace your original catalytic converter. Whether your original converter has gone bad or you're just looking to upgrade to something more performance oriented, MagnaFlow's direct fit converters are just right. Featuring a ribbed design and funneled inlets and outlets, each converter features a stainless steel body and heat shield and contains a flow efficient, monolithic honeycomb catalyst designed for maximum flow and surface area. Best of all, our 49-state direct-fit converters are in compliance with EPA guidelines so getting a car smog checked is a worry free task.
• California Residents: WARNING

MagnaFlow Black Series Diesel Particulate Filter-Back Exhaust Systems

From $733.00

MagnaFlow Black Series Filter-Back Performance Exhaust Systems

From $594.00

• Mandrel Bent Tubing
• 409 Stainless Steel Construction with High Temp Satin Black Coating
• 300 Series Stainless Steel Black Coated Double Wall Tip(s)
• 1 Year Warranty on Black Finish, Lifetime Construction
• Made in USA
• California Residents: WARNING

MagnaFlow Exhaust Cat-Back Off Road Pro Series Exhaust System

From $596.00

MagnaFlow Street Series Performance Crossmember-Back Exhaust Systems

From $1,000.00

• All Mandrel Bent Tubing
• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Lifetime Construction Warranty
• Made in USA
• California Residents: WARNING

MagnaFlow Pro-Series Off Road Cat-Back Exhaust Systems

From $1,132.00

• Available for gas or diesel trucks and SUV's
• Lifetime warranty, stainless steel construction
• High flow straight through design
• Turn-Down before the axle configuration
• California Residents: WARNING

MagnaFlow Exhaust DPF Series Particulate Filter-Back Diesel Exhaust System

From $1,043.00

MagnaFlow Pro Series Performance Diesel Exhaust Systems

From $530.00

MagnaFlow Street Series Performance Axle-Back Exhaust Systems

From $829.99

• All Mandrel Bent Tubing
• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Lifetime Construction Warranty
• Made in USA
• California Residents: WARNING