G2 Axle & Gear Replacement Axle Kits

From $115.49

• Axle upgrade engineered to withstand the additional load of high-torque applications
• Stronger than factory
• Comes with full manufacturer warranty
• California Residents: WARNING

G2 Axle & Gear Master Ring and Pinion Installation Kits

From $116.99

• G2 ring and pinion installation kit
• Includes Timken bearings, ring gear bolts, shims to set pinion and carrier bearing preloads, pinion seal and pinion nut
• California Residents: WARNING

G2 Axle & Gear Dana 44 JK Ring and Pinion Sets

From $103.50

• Dana 44 JK Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear Ring and Pinion Sets

From $108.00

• Engineered and manufactured to handle increased load
• Forged from high-strength 8620 Steel
• Precision-machined to OE specifications for perfect mesh
• Tight tolerances ensure easy set up and quiet OE-like operation
• Double-lapped and shot-peened for improved longevity
• Heat-treated for added durability
• Wide application range from
• Full 10-year warranty
• California Residents: WARNING

Rigid Industries E-Series LED Light Bars

From $1,081.49

• Patented Hybrid Optics
• 20° Flood Pattern
• 50,000+ Hr LED Lifespan
• Instant On / Off - No Warm Up
• RoHS Compliant
• Over / Under Voltage Protection
• Durable Polycarbonate Lens
• Integrated Thermal Management
• GORE® Pressure Equalizing Vent
• Designed, Engineered, & Assembled in the USA
• California Residents: WARNING

G2 Axle & Gear Hammer Differential Covers

From $119.99

• G2 aluminum differential covers are designed to not only protect your ring & pinion, they are designed to help cool your gear oil for prolonged bearing life. Made from high strength heat treated aluminum to withstand direct hits, these covers help protect your investment while adding a distinct look to your vehicle.
• California Residents: WARNING

G2 Axle & Gear Brute Differential Covers

From $112.00

G2 Axle & Gear Replacement Axle Shafts

From $114.99

• High Strength Alloy Steel
• Heat treated
• Big spline options
• Rolled splines
• Wheel studs included
• California Residents: WARNING

Rigid Industries Radiance LED Light Bars

From $385.19

• Available in multiple color options
• High-Grade aluminum alloy housing and heatsink
• Black Powder Coated mounting brackets
• Dedicated wire to run back-lighting without primary LEDs
• IP68 Compliant ? Dust / Water Ingress
• High impact polycarbonate lens
• GORE pressure equalizing vent
• California Residents: WARNING

Rigid Industries D-Series Pro LED Light Pods

From $107.99

• D-Series
• Dually D2
• Driving LED Light
• Color: Black
• California Residents: WARNING

G2 Axle & Gear Placer Gold Series Axles

From $104.00

• G/2s new made in the U.S.A. Placer Gold Series axles are an even stronger axle option for Jeep JK Wrangler owners. These new American made axles use high quality 4340 chromoly steel and feature a stronger forging with more material in critical areas.
• California Residents: WARNING

G2 Axle & Gear Dana 30 JK Ring and Pinion Sets

From $131.99

• Dana 30 JK Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear Dana 44 Ring and Pinion Sets

From $118.24

• Dana 44 Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

Rigid Industries SR-Series LED Light Bars

From $10.99

• The Rigid Industries SR-Series Light Bar, like our flagship E-Series, leads the industry in low profile performance LED lighting
• Available in a wide range of lengths and configurations, the SR-Series light bar is the perfect low-profile option for everything from on and off-road racing to police and fire rescue vehicles to marine applications
• The SR-Series light bar is designed to project light at extreme distances while consuming very little power
• Its durable extruded aluminum housing and virtually unbreakable polycarbonate lens are sealed against the elements for years of trouble-free operation
• California Residents: WARNING

G2 Axle & Gear Dana 30 Ring and Pinion Sets

From $109.99

• Dana 30 Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear Core 44 Rear Bare Housings

From $900.00

• American-made CORE 44 housings
• Feature forged bearing caps
• G-lock adjuster nut system to set backlash and carrier bearing preload
• Additional ribbing on the cast center section
• California Residents: WARNING

G2 Axle & Gear Chrysler 8.25" Ring and Pinion Sets

From $104.00

• Chrysler 8.25 Inches Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear Tone Rings

From $18.19

• Driver or passenger side rear
• Sold individually
• California Residents: WARNING

Rigid Industries UTV Side Mirrors

From $729.99

• Amp Draw: 2.3
• LED's: 9 Projection, 2 Turn
• Raw Lumens: 3775
• Lux @ 10m: 43
• Beam Distance: 66 m
• Peak Beam Intensity: 4300 cd
• 3-Wire Open Lead for Convenient Wiring
• Convex Mirror for Enhanced Field of Vision
• Break Away Joint for Damage Prevention
• Fully Adjustable 1.75” - 2.00” Tube Mount Included
• Integrated Amber LEDS for use asRunning Lights or Turn Signal
• Side Shooter Optic & Lenticular Lens forEnhanced Beam Width
• Light and Mirror Can Be Independently Adjusted
• Removable Trim Bezel Can Be Painted to Match Your Vehicle
• California Residents: WARNING

G2 Slip Yoke Eliminator Kit

From $173.99

• 356-T6 heat treated aluminum tail housing
• 1310 series yoke
• Speedometer drive gear
• Includes all necessary hardware
• G2 Axle & Gear has what you need to make your 4x4 faster, stronger and more reliable
• California Residents: WARNING

Rigid Industries RDS Series LED Light Bars

From $1,154.99

• 150 watt
• 10460 raw lumen
• 10.87 amp draw
• curved bar design
• 4 x 4 x 22 inch
• California Residents: WARNING

G2 Axle & Gear Birfield Axles

From $110.49

• G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
• California Residents: WARNING

Rigid Industries ADAPT LED Light Bars

From $1,154.99

• 8-Step Selectable Beam Pattern from 15-degrees to 90-degrees
• Integrated Optic Design with Spot, Flood, and Driving Zones
• Selectable RGB-W Accent Lighting with User-Configurable Colors
• Active View Technology - Ability to Automatically Change Beam Pattern Based on Vehicle Speed
• Molded RIGID Dash Controller Enables Instant Beam Pattern Changes and Includes Presets
• Multiple Mounting Locations
• Traditional Side Mounting or Underside Low-Profile Stealth Mount
• Wiring Harness, Dash Controller, Under Dash Module, and Mounting Hardware Included
• Impact-Resistant Polycarbonate Lens
• Aluminum Heat Sink
• Limited Lifetime Warranty
• California Residents: WARNING

G2 Axle & Gear Pinion Yokes

From $44.99

• G2 Axle and Gear offers multiple high quality Pinion Flanges and yokes for various applications with increased strength and reliability. Many of the G/2 yokes are equipped to uses the stronger and popular U-Bolt style mounting that is preferred by racers and off roaders alike.
• California Residents: WARNING