G2 Axle & Gear Replacement Axle Kits

From $115.49

• Axle upgrade engineered to withstand the additional load of high-torque applications
• Stronger than factory
• Comes with full manufacturer warranty
• California Residents: WARNING

G2 Axle & Gear Master Ring and Pinion Installation Kits

From $121.50

• G2 ring and pinion installation kit
• Includes Timken bearings, ring gear bolts, shims to set pinion and carrier bearing preloads, pinion seal and pinion nut
• California Residents: WARNING

G2 Axle & Gear Ring and Pinion Sets

From $181.99

• Engineered and manufactured to handle increased load
• Forged from high-strength 8620 Steel
• Precision-machined to OE specifications for perfect mesh
• Tight tolerances ensure easy set up and quiet OE-like operation
• Double-lapped and shot-peened for improved longevity
• Heat-treated for added durability
• Wide application range from
• Full 10-year warranty
• California Residents: WARNING

G2 Axle & Gear Hammer Differential Covers

From $80.00

• G2 aluminum differential covers are designed to not only protect your ring & pinion, they are designed to help cool your gear oil for prolonged bearing life. Made from high strength heat treated aluminum to withstand direct hits, these covers help protect your investment while adding a distinct look to your vehicle.
• California Residents: WARNING

G2 Axle & Gear Placer Gold Series Axles

From $104.00

• G/2s new made in the U.S.A. Placer Gold Series axles are an even stronger axle option for Jeep JK Wrangler owners. These new American made axles use high quality 4340 chromoly steel and feature a stronger forging with more material in critical areas.
• California Residents: WARNING

G2 Axle & Gear Birfield Axles

From $110.49

• G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
• California Residents: WARNING

G2 Axle & Gear GM 12 Bolt Ring and Pinion Sets

From $369.99

• GM 12 Bolt Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Wheel Bearing Kits

From $41.99

• G2 Axle and Gear Wheel Bearing Kits provide you with the necessary items to replace your front or rear wheel bearings.
• California Residents: WARNING

G2 Axle & Gear Dana 44 Rear Coil Buckets

From $45.00

• Rear coil buckets for 68-2052-1
• Heavy-duty steel construction
• Unpainted
• Welding-required
• California Residents: WARNING

G2 Axle & Gear Differential Crush Sleeves

From $42.69

• A Crush Sleeve is designed to maintain pinion preload to keep from burning out your pinion bearings.
• California Residents: WARNING

Weather Guard Saddle Tool Boxes

From $1,009.99

• Tamper-resistant, retracting EXTREME PROTECTION Lock on the saddle tool box for trucks helps protect against break-ins
• 90 degree cover opening for easy access
• Automotive-style rotary latch on the saddle box features smooth one-touch opening
• Full weather seal on the truck tool box protects against the elements
• Convenient attachment points secures materials and tools in pickup bed
• ARMOR TUF finish ensures years of dependability
• Limited lifetime warranty ensures unparalleled quality

Weather Guard All-Purpose Truck Tool Chests

From $1,075.99

• The back of the truck chest tool box can be placed tight against the front of the pickup bed because zero clearance is needed for opening the cover
• The angled body design on the truck bed storage box is ideal for use with fifth wheel and goose neck trailer applications
• 90 degree cover opening for easy access
• Automotive-style rotary latch mechanism keeps the cover tight against the weather seal
• Full weather seal on the truck tool box protects against the elements
• 12 volt access for electrical up-fits

G2 Axle & Gear Tork Inner Front Axles

From $123.74

Weather Guard Ratchet Straps

From $132.99

• Installation requires product to be drilled into truck rack and is permanently installed to the rack
• Quick release button retracts the straps automatically for easy stowing when not in use
• Straps rated to 1,000 lbs
• Includes a set of 2 ratchet straps, mounting bracket, and mounting hardware

Weather Guard Truck Racks

From $140.99

• Adjustable front legs allow this steel truck rack to offer a universal fit for full-sized truck beds
• The truck rack has a load capacity of 1,000 lbs., evenly distributed
• Includes a welded airfoil to help reduce drag
• True no-drill installation by using the stake pockets and high-strength mounting clamps
• Tie-down loops on each leg provide convenient points for securing loads
• Protective tape included for wrapping areas that could damage ladders and other equipment
• The rear of the truck rack has handle bars to make it easier to get on and off the truck
• Removable pins on the rear cross member allow you to quickly take off the rear cross member for loading large materials
• An additional four tie down points on the side members of the rack allow for more secure points of tying down materia

Weather Guard Gull Wing Tool Boxes

From $1,182.99

• Tamper-resistant, retracting EXTREME PROTECTION Lock on gull wing truck tool box helps protect against break-ins
• Twin, gull-wing type covers operate independently to provide easy access from either side of truck
• The truck tool box suspends from the side of a pickup truck allowing plenty of room underneath
• Automotive-style rotary latch features smooth one-touch opening from either side of the truck
• Full weather seal on the truck tool box protects against the elements
• 12 volt access for electrical up-fits
• Truck bed tool box includes powder coated steel divider tray and two keys

Weather Guard Wheel Well Truck Tool Boxes

From $766.99

• Pickup truck tool box can be used with some truck bed caps due to the low profile design
• Tamper-resistant, retracting EXTREME PROTECTION Lock on the wheel well truck box helps protect against break-ins Includes two keys
• 90 degree cover opening for easy access
• Full weather seal on the truck tool box protects against the elements

Weather Guard Lo-Side Truck Tool Boxes

From $742.00

• J-hook mounting requires no drilling of holes in the rails
• Tamper-resistant, retracting EXTREME PROTECTION Lock on the pickup truck tool box helps protect against break-ins
• Use separately or in combination with Cross or Saddle truck boxes
• 90 degree cover opening for easy access
• Automotive-style rotary latch features smooth one-touch opening from either side of the truck
• Full weather seal on the truck tool box protects against the elements
• 12 volt access for electrical up-fits
• Truck bed tool box includes mounting legs and hardware
• Two keys and a removable, high impact plastic tray included with truck box
• Limited lifetime warranty ensures unparalleled quality

Weather Guard Protect-A-Rail Cab Protectors

From $248.99

• Headache rack designed to protect the cab of the pickup from shifting loads in the cargo area
• Installation requires separate purchase of cab protector mounting kit custom fit for your vehicle
• Steel frame and 14-gauge louvers
• Limited lifetime warranty ensures unparalleled quality

Weather Guard Cab Protector Mounting Kits

From $100.00

Weather Guard Tool Box Accessories

From $140.99

• Part cabinet trays
• Divider trays
• Tool box lighting

Weather Guard Defender Series Truck Tool Boxes

From $277.27

• Delivers Heavy-Duty Security with two Hook Loop Strikers and Dual Stage Rotary Latches
• Provides Professional Durability with four-piece Welded Construction putting strength where it is needed most
• Classic Weather Resistance from full weather seal with D-shaped ribbed weather stripping
• Tamper-resistant Push Button Locks - drill resistant through key hole
• Heavy-Duty pry resistance with C-channel reinforced welded lid construction and reinforced front body panel
• Dual Gas Strut supported lid with Protective Sleeves
• Includes sliding small parts tray
• California Residents: WARNING

G2 Axle & Gear Tork Outer Front Axles

From $107.24