Welcome Guest
SHOP BY CATEGORY
SHOP BY BRAND
SHOP BY VEHICLE
Sales Support 877-474-4821
877-260-5452
Call Our Stateside Experts!
King Shocks/Tekonsha King Shocks
King Shocks/Tekonsha On Sale
17 Product Groups
Switch to View Products
King Shocks OEM Performance Series Shock Kits
King Shocks Performance Shock KitFrom $1,072.55
- OEM Performance Series Rear Shocks
- Bolt-On Installaltion
- California Residents: WARNING
From $1,072.55
4.4
4.4
(20)
King Shocks OEM Performance Coilover Shock Kits
King Shocks Performance Coil Over Shock KitFrom $1,466.80
- OEM Performance Coilover Shock Kit
- Bolt-On Installation
- California Residents: WARNING
From $1,466.80
3.9
3.9
(9)
King UTV Shocks
King UTV ShocksFrom $1,125.75
- Zinc plated cylinders
- Wide Range Compression Adjustable
- Clearly marked billet adjuster knob
- King Shocks custom tuned, UTV performance shock kit gives your Polaris Ranger or RZR unparalleled levels of performance and ride quality
- California Residents: WARNING
From $1,125.75
King Shocks Steering Stabilizers
King Shocks Steering StabilizerFrom $301.15
- King steering stabilizers are the solution to front end stability issues when running aggressive tread patterns or oversized tires
- Factory replacement
- Balanced flow piston technology
- California Residents: WARNING
From $301.15
4.5
4.5
(8)
Tekonsha Trailer Testers
Tekonsha Trailer TesterFrom $661.99
- Trailer Tester
- California Residents: WARNING
From $661.99
5.0
5.0
(1)
King Shocks Bump Stops
King Shocks Front Hydraulic Bump StopsFrom $308.75
- 2.0 and 2.5 inch diameter bodies with stroke lengths from 2 to 4 inches to fit any mounting location requirements and handle any suspension arresting loads
- California Residents: WARNING
From $308.75
5.0
5.0
(1)
Tekonsha Brake Control Wiring Harnesses
Tekonsha Brake Control Wiring HarnessFrom $16.99
- The Tekonsha Brake control wire kits make wiring up your brake controller unit a simple plug and play operation.
- No more guessing what each wire does and were it goes.
- California Residents: WARNING
From $16.99
5.0
5.0
(4)
Tekonsha Shur-Set III Breakaway Systems
Tekonsha Shur-Set III Breakaway SystemFrom $102.99
- Shur-Set III(R) Breakaway System
- Incl. 5 Amp/Hr Battery
- PN[2005] Breakaway Switch
- California Residents: WARNING
From $102.99
Tekonsha Batteries
Tekonsha BatteryFrom $40.99
- Battery
- 12 Volt
- 5 Amp/Hr
- Sealed Lead
- For Use w/Sure-Set III(TM) Break-Away Systems
- California Residents: WARNING
From $40.99
Tekonsha Breakaway Systems
Tekonsha Breakaway SystemFrom $13.99
- Soft-Trac II Breakaway System
- California Residents: WARNING
From $13.99
Tekonsha Brake Control Wiring Adapters
Tekonsha Brake Control Wiring AdapterFrom $18.99
- Brake Control Wiring Adapter
- 2 Plug
- Drilling Required
- Under Dash Left of Steering Column/Brake Pedal
- Install Time 5 min.
- California Residents: WARNING
From $18.99
Tekonsha Shur-Set III All Polymer Breakaway Systems
Tekonsha Shur-Set III All Polymer Breakaway SystemFrom $68.99
- Shur-Set III(R) All Polymer Breakaway System
- Lockable
- Incl. PN[2010] Nylon Breakaway Switch
- California Residents: WARNING
From $68.99
Tekonsha Mounting Brackets
Tekonsha Mounting BracketFrom $14.99
- Prodigy(R) Mounting Bracket Kit
- California Residents: WARNING
From $14.99
King Shocks Coil Springs
King Shocks Coil SpringsFrom $106.99
- King Shocks Coil Springs
- California Residents: WARNING
From $106.99
153 Products
Switch to View Product Groups
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.5 OEM Performance Series - Front - Remote Reservoir Coilover Shock Absorber with Adjuster - 25001-143A
- Fitment: Direct Fit
- Front Coilovers with remote reservoir
- 2.75 inch to 3.25 lift height
- Color: Blue, Sold as a pair
- Includes reservior adjusteres (not pictured)
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$2,172.65
$2,287.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
King Shocks 2.5 OEM Performance Series - Front - Remote Reservoir Coilover Shock Absorber with Adjuster - 25001-143A
Part #: KST25001-143A$2,172.65
$2,287.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- Front Coilovers with remote reservoir
- 2.75 inch to 3.25 lift height
- Color: Blue, Sold as a pair
- Includes reservior adjusteres (not pictured)
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.5 OEM Performance Series - Front - Internal Reservoir Coilover Shock Absorber - 25001-151
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 3 left in Stock ?- Fitment: Direct Fit
- Front internal reservoir coilover shocks for 96-02 Toyota 4Runner and 96-04 Tacoma (6-lug)
- Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination. High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking (where applicable)
- Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body
- 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
- The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality
- Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
- Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life
- High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact
- Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$1,466.80
$1,544.00
Only 3 left in Stock ?
King Shocks 2.5 OEM Performance Series - Front - Internal Reservoir Coilover Shock Absorber - 25001-151
Part #: KST25001-151$1,466.80
$1,544.00
Only 3 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 3 left in Stock ?- Fitment: Direct Fit
- Front internal reservoir coilover shocks for 96-02 Toyota 4Runner and 96-04 Tacoma (6-lug)
- Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination. High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking (where applicable)
- Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body
- 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
- The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality
- Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
- Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life
- High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact
- Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.5 OEM Performance Series - Front - Remote Reservoir Shock Absorber - 25001-136
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- Ford F-250/F-350 Super Duty 4WD models
- Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination. High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking (where applicable)
- Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body
- 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
- The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality
- Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
- Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life
- High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact
- Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$1,072.55
$1,129.00
In-Stock Ships today ?
King Shocks 2.5 OEM Performance Series - Front - Remote Reservoir Shock Absorber - 25001-136
Part #: KST25001-136$1,072.55
$1,129.00
In-Stock Ships today
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- Ford F-250/F-350 Super Duty 4WD models
- Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination. High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking (where applicable)
- Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body
- 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
- The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality
- Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
- Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life
- High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact
- Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.0 OEM Performance Series Front Steering Stabilizer - 20001-152
- Fitment: Direct Fit
- 07-18 Wranger JK, 2 & 4 Door
- Stabilizer bodies are bored and honed after cadmium plating to ensure cylindricity and an efficient piston seal that enhances valve function
- Highly developed "balanced flow" port designs on our 6061 aluminum alloy piston provide superior damping
- Heat treated stainless alloy valve shims do not fracture like plain carbon steel and resist deformation at high temperatures providing consistent fade free performance
- Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
- Special long wearing urethane seals have been tested on 18 wheelers for 450,000 miles without a failure
- Large 3/4" or 7/8" diameter shafts, depending on the stabilizer length, have a tensile strength of 100,000 pounds per square inch. They are hard chromed to combat rock bruising and micro-polished to a 6 RA finish for extended seal life
- Replaceable Teflon lined stainless steel spherical bearings will not rust and provide smooth articulation with no metal to metal contact.
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$301.15
$317.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$301.15
$317.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- 07-18 Wranger JK, 2 & 4 Door
- Stabilizer bodies are bored and honed after cadmium plating to ensure cylindricity and an efficient piston seal that enhances valve function
- Highly developed "balanced flow" port designs on our 6061 aluminum alloy piston provide superior damping
- Heat treated stainless alloy valve shims do not fracture like plain carbon steel and resist deformation at high temperatures providing consistent fade free performance
- Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
- Special long wearing urethane seals have been tested on 18 wheelers for 450,000 miles without a failure
- Large 3/4" or 7/8" diameter shafts, depending on the stabilizer length, have a tensile strength of 100,000 pounds per square inch. They are hard chromed to combat rock bruising and micro-polished to a 6 RA finish for extended seal life
- Replaceable Teflon lined stainless steel spherical bearings will not rust and provide smooth articulation with no metal to metal contact.
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.5 x 14" 200Lbs Coil Spring for Coilover Shock - SPR25-14-200
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 3 left in Stock ?- Fitment: Universal Fit
- 2.5" Inside diameter
- 14" Length
- 200 lbs spring rate
- Coils are closed and ground to sit flat
- High tensile chrome silicon wire
- Wound for off-road applications
- Made in the USA
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
SHOP 4WP's HUGE SELECTION
Qualifies for Free Shipping on Orders Over $99
$92.99
Only 3 left in Stock ?
$92.99
Only 3 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 3 left in Stock ?- Fitment: Universal Fit
- 2.5" Inside diameter
- 14" Length
- 200 lbs spring rate
- Coils are closed and ground to sit flat
- High tensile chrome silicon wire
- Wound for off-road applications
- Made in the USA
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
SHOP 4WP's HUGE SELECTION
Qualifies for Free Shipping on Orders Over $99
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 3 x 14" 600Lbs Coil Spring for Coilover Shock - SPR3-14-600
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Universal Fit
- 3" Inside diameter
- 14" Length
- 600 lbs spring rate
- Coils are closed and ground to sit flat
- High tensile chrome silicon wire
- Wound for off-road applications
- Made in the USA
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
SHOP 4WP's HUGE SELECTION
Qualifies for Free Shipping
$116.99
In-Stock Ships today ?
$116.99
In-Stock Ships today
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Universal Fit
- 3" Inside diameter
- 14" Length
- 600 lbs spring rate
- Coils are closed and ground to sit flat
- High tensile chrome silicon wire
- Wound for off-road applications
- Made in the USA
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
SHOP 4WP's HUGE SELECTION
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.5 x 12" 300Lbs Coil Spring for Coilover Shock - SPR3-14-300
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 4 left in Stock ?- Fitment: Universal Fit
- 3" Inside diameter
- 14" Length
- 300 lbs spring rate
- Coils are closed and ground to sit flat
- High tensile chrome silicon wire
- Wound for off-road applications
- Made in the USA
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$116.99
Only 4 left in Stock ?
$116.99
Only 4 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 4 left in Stock ?- Fitment: Universal Fit
- 3" Inside diameter
- 14" Length
- 300 lbs spring rate
- Coils are closed and ground to sit flat
- High tensile chrome silicon wire
- Wound for off-road applications
- Made in the USA
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.5 OEM Performance Series - Front - Coilover Internal Reservoir Shock Absorber - 25001-138
- Fitment: Direct Fit
- Front coilover shocks for 00-06 Tundra
- Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination. High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking (where applicable)
- Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body
- 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
- The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality
- Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
- Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life
- High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact
- Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$1,466.80
$1,544.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
King Shocks 2.5 OEM Performance Series - Front - Coilover Internal Reservoir Shock Absorber - 25001-138
Part #: KST25001-138$1,466.80
$1,544.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- Front coilover shocks for 00-06 Tundra
- Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination. High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking (where applicable)
- Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body
- 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
- The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality
- Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
- Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life
- High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact
- Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.5 OEM Performance Series - Front - Remote Reservoir Coilover Shock Absorber - 25001-139
- Fitment: Direct Fit
- Front coilover shocks for 04-15 Nissan Titan
- Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination. High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking (where applicable)
- Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body
- 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
- The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality
- Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
- Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life
- High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact
- Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$1,805.00
$1,900.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
King Shocks 2.5 OEM Performance Series - Front - Remote Reservoir Coilover Shock Absorber - 25001-139
Part #: KST25001-139$1,805.00
$1,900.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- Front coilover shocks for 04-15 Nissan Titan
- Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination. High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking (where applicable)
- Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body
- 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
- The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality
- Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
- Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life
- High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact
- Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.5 OEM Performance Series - Rear - Piggyback Reservoir Shock Absorber - 25001-142
- Fitment: Direct Fit
- Rear piggyback reservoir shocks for 04-15 Nissan Titan
- Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination. High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking (where applicable)
- Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body
- 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
- The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality
- Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
- Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life
- High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact
- Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$1,072.55
$1,129.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
King Shocks 2.5 OEM Performance Series - Rear - Piggyback Reservoir Shock Absorber - 25001-142
Part #: KST25001-142$1,072.55
$1,129.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- Rear piggyback reservoir shocks for 04-15 Nissan Titan
- Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination. High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking (where applicable)
- Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body
- 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
- The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality
- Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
- Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life
- High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact
- Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.5 OEM Performance Series - Front - Remote Reservoir Coilover Shock Absorber - 25001-143
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- Front coilover shocks for 07-19 Toyota Tundra
- Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination. High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking (where applicable)
- Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body
- 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
- The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality
- Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
- Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life
- High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact
- Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$1,805.00
$1,900.00
In-Stock Ships today ?
King Shocks 2.5 OEM Performance Series - Front - Remote Reservoir Coilover Shock Absorber - 25001-143
Part #: KST25001-143$1,805.00
$1,900.00
In-Stock Ships today
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- Front coilover shocks for 07-19 Toyota Tundra
- Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination. High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking (where applicable)
- Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body
- 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
- The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality
- Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
- Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life
- High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact
- Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.0 OEM Performance Series - Front - Internal Reservoir Shock Absorber for 3 - 5" Lifts - 20001-166
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Front shocks for 3-5" lift
- Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination. High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking (where applicable)
- Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body
- 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
- The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality
- Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
- Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life
- High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact
- Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$634.60
$668.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
King Shocks 2.0 OEM Performance Series - Front - Internal Reservoir Shock Absorber for 3 - 5" Lifts - 20001-166
Part #: KST20001-166$634.60
$668.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Front shocks for 3-5" lift
- Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination. High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking (where applicable)
- Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body
- 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
- The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality
- Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
- Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life
- High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact
- Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.0 OEM Performance Series Internal Reservoir Rear Shock Absorber - 20001-167
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 3 left in Stock ?- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- With 3-5 inch lift kits
- Rear shocks
- Simple bolt on installation
- Large diameter micro-polished shafts
- Shaft mounted urethane foam bumpers to cushion at full bottoming
- 100% made in the U.S.A.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$664.05
$699.00
Only 3 left in Stock ?
King Shocks 2.0 OEM Performance Series Internal Reservoir Rear Shock Absorber - 20001-167
Part #: KST20001-167$664.05
$699.00
Only 3 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 3 left in Stock ?- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- With 3-5 inch lift kits
- Rear shocks
- Simple bolt on installation
- Large diameter micro-polished shafts
- Shaft mounted urethane foam bumpers to cushion at full bottoming
- 100% made in the U.S.A.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.0 OEM Performance Series Internal Reservoir Front Shock Absorber - 20001-204
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- With 6 inch lift kits
- Front shocks
- Simple bolt on installation
- Large diameter micro-polished shafts
- Shaft mounted urethane foam bumpers to cushion at full bottoming
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$682.10
$718.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
King Shocks 2.0 OEM Performance Series Internal Reservoir Front Shock Absorber - 20001-204
Part #: KST20001-204$682.10
$718.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- With 6 inch lift kits
- Front shocks
- Simple bolt on installation
- Large diameter micro-polished shafts
- Shaft mounted urethane foam bumpers to cushion at full bottoming
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.0 OEM Performance Series - Front - Internal Reservoir Shock Absorber for 0 - 2" Lifts - 20001-206
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 3 left in Stock ?- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- With 0-2 inch lift kits
- Front shocks
- Simple bolt on installation
- Large diameter micro-polished shafts
- Shaft mounted urethane foam bumpers to cushion at full bottoming
- 100% made in the US
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$634.60
$668.00
Only 3 left in Stock ?
King Shocks 2.0 OEM Performance Series - Front - Internal Reservoir Shock Absorber for 0 - 2" Lifts - 20001-206
Part #: KST20001-206$634.60
$668.00
Only 3 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 3 left in Stock ?- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- With 0-2 inch lift kits
- Front shocks
- Simple bolt on installation
- Large diameter micro-polished shafts
- Shaft mounted urethane foam bumpers to cushion at full bottoming
- 100% made in the US
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.0 OEM Performance Series - Rear - Internal Reservoir Shock Absorber for 0 - 2" Lifts - 20001-207
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- With 0-2 inch lift kits
- Rear shocks
- Simple bolt on installation
- Large diameter micro-polished shafts
- Shaft mounted urethane foam bumpers to cushion at full bottoming
- 100% made in the U.S.A.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$664.05
$699.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
King Shocks 2.0 OEM Performance Series - Rear - Internal Reservoir Shock Absorber for 0 - 2" Lifts - 20001-207
Part #: KST20001-207$664.05
$699.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- With 0-2 inch lift kits
- Rear shocks
- Simple bolt on installation
- Large diameter micro-polished shafts
- Shaft mounted urethane foam bumpers to cushion at full bottoming
- 100% made in the U.S.A.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.0 Air Bump Stop Mounting Sleeve - 20AB422-102
- Fitment: Universal Fit
- Fits King 2.0 x 2" bump stop
- Bump stop mounting sleeve only
- Bump stop not included
- Sold individually
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping on Orders Over $99
$49.40
$52.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
$49.40
$52.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Universal Fit
- Fits King 2.0 x 2" bump stop
- Bump stop mounting sleeve only
- Bump stop not included
- Sold individually
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping on Orders Over $99
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.0 Steering Stabilizer - 20C001-204
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 1 left in Stock ?- Fitment: Direct Fit
- Built to perform with longevity
- Strong and durable for extreme conditions
- Easily rebuilt and serviced
- Optional adjusters allow user customization
- Delivered with vehicle specific tuning
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$301.15
$317.00
Only 1 left in Stock ?
$301.15
$317.00
Only 1 left in Stock
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
Only 1 left in Stock ?- Fitment: Direct Fit
- Built to perform with longevity
- Strong and durable for extreme conditions
- Easily rebuilt and serviced
- Optional adjusters allow user customization
- Delivered with vehicle specific tuning
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.5 OEM Performance Series - Rear - Piggyback Reservoir Shock Absorber - 25001-110
- Fitment: Direct Fit
- Rear piggyback reservoir shocks for 05 - 19 Nissan Frontier
- Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination. High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking (where applicable)
- Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body
- 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
- The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality
- Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
- Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life
- High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact
- Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$1,072.55
$1,129.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
King Shocks 2.5 OEM Performance Series - Rear - Piggyback Reservoir Shock Absorber - 25001-110
Part #: KST25001-110$1,072.55
$1,129.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- Rear piggyback reservoir shocks for 05 - 19 Nissan Frontier
- Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination. High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking (where applicable)
- Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body
- 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
- The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality
- Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
- Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life
- High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact
- Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions.
- Sold as a pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.5 OEM Performance Series - Front - Remote Reservoir Coilover Shock Absorber - 25001-111
- Fitment: Direct Fit
- OEM Performance Series Front Coilovers w/internal reservoir
- Sold as: Pair
- Built to perform with longevity
- Strong and durable for extreme conditions
- Easily rebuilt and serviced
- Optional adjusters allow user customization
- Delivered with vehicle specific tuning
- Bolt on replacement for popular trucks, SUVs, and UTVs
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$1,805.00
$1,900.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
King Shocks 2.5 OEM Performance Series - Front - Remote Reservoir Coilover Shock Absorber - 25001-111
Part #: KST25001-111$1,805.00
$1,900.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- OEM Performance Series Front Coilovers w/internal reservoir
- Sold as: Pair
- Built to perform with longevity
- Strong and durable for extreme conditions
- Easily rebuilt and serviced
- Optional adjusters allow user customization
- Delivered with vehicle specific tuning
- Bolt on replacement for popular trucks, SUVs, and UTVs
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.5 OEM Performance Series Remote Reservoir Coilover Front Shock Absorbers - 25001-119
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- Designed for the best ride at 2" of lift
- Extended Length: 21.687 inch
- Collapsed Length: 16.750 inch
- Travel Length: 4.937 inch
- Finish Color: Blue
- Lug Pattern: 6 Lug Only
- Bolt-On Installation
- Sold as: Pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$1,805.00
$1,900.00
In-Stock Ships today ?
King Shocks 2.5 OEM Performance Series Remote Reservoir Coilover Front Shock Absorbers - 25001-119
Part #: KST25001-119$1,805.00
$1,900.00
In-Stock Ships today
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- Designed for the best ride at 2" of lift
- Extended Length: 21.687 inch
- Collapsed Length: 16.750 inch
- Travel Length: 4.937 inch
- Finish Color: Blue
- Lug Pattern: 6 Lug Only
- Bolt-On Installation
- Sold as: Pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.5 OEM Performance Series Remote Reservoir Coilover Front Shock Absorbers with Adjuster - 25001-119A
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- 6 lug applications
- Front shocks
- Sold as a pair
- Extended length: 21.687"
- Collapsed length: 16.75"
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$2,172.65
$2,287.00
In-Stock Ships today ?
King Shocks 2.5 OEM Performance Series Remote Reservoir Coilover Front Shock Absorbers with Adjuster - 25001-119A
Part #: KST25001-119A$2,172.65
$2,287.00
In-Stock Ships today
?
LOW PRICE GUARANTEE
EASY RETURNS
How to Get it
Free! Curbside & In-Store Pickup: Select A Store Near You
Ship to Home:
In-Stock Ships today ?- Fitment: Direct Fit
- 6 lug applications
- Front shocks
- Sold as a pair
- Extended length: 21.687"
- Collapsed length: 16.75"
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.5 OEM Performance Series - Rear - Remote Reservoir Shock Absorber - 25001-121
- Fitment: Direct Fit
- OEM Performance Rear Shocks w/Remote Reservoir
- Extended Length: 24.290 inch
- Collapsed Length: 15.830 inch
- Travel Length: 8.46 inch
- Finish Color: Blue
- Bolt-On Installation
- Sold as: Pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$1,102.95
$1,161.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
King Shocks 2.5 OEM Performance Series - Rear - Remote Reservoir Shock Absorber - 25001-121
Part #: KST25001-121$1,102.95
$1,161.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- OEM Performance Rear Shocks w/Remote Reservoir
- Extended Length: 24.290 inch
- Collapsed Length: 15.830 inch
- Travel Length: 8.46 inch
- Finish Color: Blue
- Bolt-On Installation
- Sold as: Pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
4WP PROTECTION PLAN
Our Protection Plan covers your investment above and beyond the manufacturer's coverage. For only 10% more, if your item is damaged, fails or malfunctions, we'll replace it for free!
Sign In Or Create an Account
Reset Password
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
Choose Your Secure Checkout Method
Create An Account
Add to Wishlist
King Shocks 2.5 OEM Performance Series - Front - Remote Reservoir Coilover Shock Absorber - 25001-124
- Fitment: Direct Fit
- OEM Performance Series Front Coilovers w/Remote Reservoir
- Extended Length: 21.690 inch
- Collapsed Length: 16.80 inch
- Travel Length: 4.89 inch
- Finish Color: Blue
- Bolt-On Installation
- Sold as: Pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
$1,805.00
$1,900.00
On Backorder
Contact Us for Availability or Alternatives
LOW PRICE GUARANTEE
EASY RETURNS
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
King Shocks 2.5 OEM Performance Series - Front - Remote Reservoir Coilover Shock Absorber - 25001-124
Part #: KST25001-124$1,805.00
$1,900.00
On Backorder
Contact Us for Availability or Alternatives
Email me when this product comes in stock
LOW PRICE GUARANTEE
EASY RETURNS
- Fitment: Direct Fit
- OEM Performance Series Front Coilovers w/Remote Reservoir
- Extended Length: 21.690 inch
- Collapsed Length: 16.80 inch
- Travel Length: 4.89 inch
- Finish Color: Blue
- Bolt-On Installation
- Sold as: Pair
- California Residents: WARNING + View More Specs - View Less Specs
PROMOTIONS AUTOMATICALLY APPLIED
Lowest Price! Guaranteed! Request A Price Match
Qualifies for Free Shipping
