KMC KM540 Recon Black / Machined Wheels

From $115.20

KMC KM235 Grenade Crawl Black / Machined Wheels

From $456.30

Moto Metal MO970 Black / Machined Wheels

From $169.20

• Available Sizes: 16", 17", 18", 20"
• Bolt Patterns: 5 lug, 6 lug, 8 lug
• Finish: Gloss Black Machined Face

KMC XD Series XD820 Grenade Satin Black Milled Wheels

From $277.20

• KMC XD Series XD820 Grenade Wheels
• Wheel Size: 16, 17, 18, 20, 22 inch diameter
• Bolt Pattern: 5, 6, 8 lug design
• Finish: Satin Black Milled
• California Residents: WARNING

TeraFlex Falcon Series Shocks

From $1,705.99

• JK specific reservior locations
• Increases vehicle stability
• Improved dynamic roll control
• Optimized fitment for clearance during full suspension travel and articulation
• Front offset stud design creates additional frame clearance
• Piggyback design increases fluid flow by 6x over restricting reservoir hose designs
• California Residents: WARNING

TeraFlex Leveling Kits

From $115.99

• .5" up to 2" options
• TeraFlex has the perfect solution to level your vehicle if it is dipping in the front from the weight of a winch, sagging, or to level out a loaded vehicle
• These spacers are designed to work in stock configuration, or with a lifted vehicle
• All spacers are sold individually
• California Residents: WARNING

KMC XD Series XD820 Grenade Satin Black Wheels

From $207.00

• These Jeep wheel designs are race-proven and feature an unmatched combination of light weight and durability
• Wheel Size: 16, 17, 18, 20, 22 inch diameter
• Bolt Pattern: 5, 6, 8 lug design
• Finish: Satin Black
• California Residents: WARNING

TeraFlex Flex Control Arms

From $1,239.99

• FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length
• California Residents: WARNING

TeraFlex Steering Stabilizer Kits

From $301.99

• Mounting Brackets
• Hardware Kit
• California Residents: WARNING

TeraFlex Swaybar Quick Disconnects

From $12.99

• TeraFlex Quick Disconnects are the leader in the industry
• The sway bar link uses a large polyurethane ball and pin for easy sway bar link removal
• When connected for street use the link provides immediate reaction during sway bar loading to eliminate excess play
• California Residents: WARNING

TeraFlex CRD60 HD Axle Assemblies

From $2,620.99

• Tera CRD60 specific high-pinion rear axle housing design
• HD bearing caps increase rigidity and reduce ring and pinion distortion
• Constant Radius Design (CRD) provides maximum ground clearance regardless of pinion angle
• Built-in “skimmer” cuts ring gear oil halo and forces it into the pinion bearings
• Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing
• Oversized outer pinion bearing handles increased torque and high-load conditions
• High-capacity housing holds maximum amount of oil
• Asymmetric housing design for extra-long tube side strength
• Pre-installed inner axle seals
• Ductile cast iron housing with increased rib gussets
• HD ductile iron differential cover with increased cover mounting area
• Integrated lower control arm skid plates
• High-flow oil passages
• Bottom oil drain hole for simple fluid changes
• Reinforced rear track bar mount with multiple mounting locations
• UV protected triple-stage powder coat for corrosion resistance
• 1/4”-thick CNC laser cut axle brackets for extreme strength
• Pre-installed upper control arm bushings
• Proper pinion angle for lifted applications
• Features a raised pinion angle and raised track bar bracket
• Pre-tapped hole on spring perch for bump stop extensions
• Pre-drilled holes for limit straps and lower spring retainers
• Retains all ESP, ABS, and speedometer sensor capability
• 100% engineered, designed, and built in the USA with new components

TeraFlex Extreme HD Drag Link Kit

From $15.99

• The TeraFlex HD drag link kit is designed for extreme conditions that typically will cause factory steering components to bend and fail
• California Residents: WARNING

TeraFlex High Steer System

From $1,097.99

• Includes tie rod/drag link with one ton tie rod ends
• Tapered inserts
• Pitman arm
• HD cast high steer knuckle
• For use with LCG Lift Kits
• California Residents: WARNING

TeraFlex Rzeppa Factory Replacement CV Kit

From $184.99

• TeraFlex has created the High Angle Rzeppa Factory Replacement CV Joint Kit to help you retain your driveline
• With the High Angle CV housing, it can decrease the boot failure that's commonly seen in taller lifts
• Included in the kit are socket head bolts, the CV joint assembly, a 6 mm Allen wrench, the high angle CV housing boot and the cap, the bolt flanges, and low friction CV grease
• California Residents: WARNING

KMC KM651 Slide Gloss Black w/ Clear Coat Wheels

From $399.60

• KMC KM651 Slide Wheels
• Wheel Size: 20, 22, 24 and 26 inch Diameter
• Bolt pattern: 5 and 6 Lug Design
• Finish: Gloss Black w/ Clear Coat
• California Residents: WARNING

TeraFlex Skid Plates

From $11.99

• Jeep skid plates designed to increase overall ground clearance by replacing factory skid plate
• Manufactuered with Stronger and Heavier 1/4" guaged materials
• Installation hardware included
• California Residents: WARNING

TeraFlex NP231 Extreme Short Shaft Kit

From $399.99

• Extreme Short Shaft Kit
• With 231 transfer case
• Eliminates slip yoke
• Requires a longer CV style drive shaft
• California Residents: WARNING

TeraFlex Differential Covers

From $115.99

• Designed to offer extreme protection from rocks, obstacles and other debris on the trail
• Covers are cast from the same high-strength ductile-iron as our their axle housings
• Features a large diameter fill tube/inspection port at the top to accommodate a funnel or gear oil bottle pour spout
• Fluid level port doubles as a mid-height inspection port
• California Residents: WARNING

KMC KM700 Revert Chrome Wheels

From $140.40

• KM700 Revert Series wheels
• KMC rims are in a League of their own, a must see line of wheels
• Available sizes: 20, 22, and 24
• Construction: Cast Aluminum
• Finish options: Satin black and Chrome
• California Residents: WARNING

TeraFlex CB Antenna Mounts

From $28.99

• Black
• Easily mount a CB antenna
• Positions the antenna behind the spare tire and in some cases flexibility of the antenna will be limited
• Includes mounting hardware
• California Residents: WARNING

TeraFlex Trackbar Kits

From $278.99

• Adjustable Track Bar
• Frame Side Bracket
• Axle Side Bracket
• Use With High Steer Knuckle
• California Residents: WARNING

TeraFlex Ball Joints

From $155.99

• 1045 carbon steel housing with magnesium phosphate coated assembly
• 4140 chromoly ball/stud with magnesium phosphate anti-corrosion coating
• Factory style serrated flanged castle nut
• CR black neoprene boot
• California Residents: WARNING

TeraFlex Coil Springs

From $245.99

• Coil Springs
• Linear design with Extensive rate tuning and dynamic balance
• Deliver unsurpassed highway handling and off road performance
• Shot peened to reduce spring sag and fatigue
• Powdercoated for superior element protection
• Limited lifetime warranty against defects
• California Residents: WARNING

TeraFlex Single Rate S/T Sway Bar Systems

From $793.99

• Forged street front sway bar
• All necessary hardware
• And more
• California Residents: WARNING