MagnaFlow Black Series Cat-Back Performance Exhaust Systems

From $1,256.00

• Mandrel Bent Tubing
• 409 Stainless Steel Construction with High Temp Satin Black Coating
• 300 Series Stainless Steel Black Coated Double Wall Tip(s)
• 1 Year Warranty on Black Finish, Lifetime Construction
• Made in USA
• California Residents: WARNING

MagnaFlow MF Series Performance Cat-Back Exhaust Systems

From $1,001.00

• All Mandrel Bent Tubing
• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Lifetime Construction Warranty
• Made in USA
• California Residents: WARNING

Synergy Manufacturing High Steer Drag Link

From $450.00

Synergy Manufacturing Wheel Spacers

From $110.00

• Wheel hub centric for increased strength (-H part numbers only)
• CNC machined from billet 6061-T6 aluminum
• Features corrosion resistant red anodizing
• Can be used with factory or after market wheels
• Adapters are 1.50" wide
• Includes Loctite
• Sold as a pair

Synergy Manufacturing Ball Joints

From $250.00

Synergy Manufacturing Tie Rods

From $350.00

Synergy Manufacturing Axle Housing Inner Sleeve Kit

From $150.00

• Designed to increase the strength of the front Axle housing which is prone to bending when larger off road tires are installed and used off road
• Inner Axle Sleeves add a 57% increase in strength over stock
• The stock axle housing must be drilled and plug welded for installation
• California Residents: WARNING

MagnaFlow Performance Stainless Steel Mufflers

From $107.00

• Delivers a Smooth, Deep Tone
• 100% Stainless Steel
• Mufflers are Bi-Directional
• Lifetime Warranty
• California Residents: WARNING

Synergy Manufacturing Steering Correction Kit

From $425.00

Synergy Manufacturing Skid Plates

From $1,335.00

• Jeep skid plates manufactured from 3/16" crush resistant Grade A-572 Steel plate
• Flush mounted hardware provides a 100% smooth skid surface
• Premium powdercoat finish for maximum corrosion resistance
• Allows access to drain plug without removal
• Made in the USA
• California Residents: WARNING

MagnaFlow Performance Exhaust Tips

From $10.99

• MagnaFlow Performance Exhaust Tips are constructed from the highest quality 304 stainless steel
• The long lasting high luster polish lasts longer than most chrome plating
• All MagnaFlow Performance Exhaust Tips are available in either single or double walled construction and features clamp on or weld on installation
• California Residents: WARNING

Synergy Manufacturing Tie Rod Clamps

From $75.00

• CNC machined from 1020 DOM material
• 100% bolt on
• Zinc plated for corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Front Track Bar & Sector Shaft Brace Kit

From $275.00

• Front Track Bar & Sector Shaft Brace Kit
• 2 and 4-door models
• Includes SYN8069-01 & SYN8069-02
• Steering Sector Brace
• Track bar brace
• Laser cut and CNC bent from 3/16" high strength steel
• Gray powder coat finish for maximum corrosion resistance
• Bolt on installation
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Suspension Systems

From $1,070.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry.
• All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Front Track Bar Relocation Bracket

From $220.00

• This bracket raises the vehicle's axle side track bar mount
• Heavy-duty
• Special bolt-on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Synergy Manufacturing Steering Kits

From $1,050.00

• Requires a minimum of 2 inch front bump stop spacers
• 100% bolt-on
• Powdercoat finish for maximum durability and corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing HD Metal on Metal Tie Rod End Boot

From $10.00

• Tie Rod End Boots
• Made of tear/wear resistant black NBR and come with retaining springs
• Sold Individually
• California Residents: WARNING

Synergy Manufacturing Dana 30/44 Inner C Gusset Kit 2.5 Inch Axle Housing

From $85.00

• CNC Bent For Precision Fit
• Laser cut for tight clearances
• Heavy Duty Three Side Construction
• Requires Welding: Fits All Jeep JK Dana 30/44 Fronts With 2.5 inch Axle Tubes
• Made in the U.S.A
• California Residents: WARNING

Synergy Grab Handles

From $100.00

• Powder coat finish eliminates corrosion that can occur under extreme element. Includes all hardware necessary for a quick and easy installation. Compatible with both hard and soft tops3
• California Residents: WARNING

Synergy Manufacturing Rear Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of rear axle when running a suspension lift
• 100% bolt on
• Rear track bar relocation bracket for lifts taller than 4.5 inch
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Shock Mounts

From $100.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Steering Box Brace

From $10.00

• Steering Box Brace
• Laser cut
• CNC bent
• precision welded
• 1/4" Steel
• Black powder coat finish for maximum corrosion resistance
• 100% Bolt-on installation
• No cutting or drilling required
• Make in the USA
• Note: When using an upgraded 09+ Steering Box, 8559-04 is the steering box brace needed, BUT, modifications will need to be made to the upgraded steering box mounts for proper fitment of the brace.
• California Residents: WARNING

Synergy Manufacturing Adjustable Front Lower Control Arms

From $500.00

Synergy Manufacturing Jeep JK Stabilizer Relocation Kit

From $60.00

• Designed to relocate a Fox/Synergy Suspension steering stabilizer up and out of harms way on a JK
• Includes grade 8 hardware
• Manufactured from high strength 3/16 inch steel
• Powdercoated for corrosion resistance
• Factory clamp cannot be flipped, it will interfere with the diff cover
• Made in the U.S.A
• California Residents: WARNING