Synergy Manufacturing Front Axle Assurance Kits

From $310.00

• Designed to strengthen the front axle
• Provides a 59% increase in strength over the stock axle tubes
• Inner C Gussets are laser cut and CNC bent in a heavy duty 3-sided construction
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Dana 30/44 Inner C Gusset Kit 2.5 Inch Axle Housing

From $85.00

• CNC Bent For Precision Fit
• Laser cut for tight clearances
• Heavy Duty Three Side Construction
• Requires Welding: Fits All Jeep JK Dana 30/44 Fronts With 2.5 inch Axle Tubes
• Made in the U.S.A
• California Residents: WARNING

Synergy Grab Handles

From $100.00

• Powder coat finish eliminates corrosion that can occur under extreme element. Includes all hardware necessary for a quick and easy installation. Compatible with both hard and soft tops3
• California Residents: WARNING

Synergy Manufacturing Rear Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of rear axle when running a suspension lift
• 100% bolt on
• Rear track bar relocation bracket for lifts taller than 4.5 inch
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Shock Mounts

From $100.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

MBRP Pro Series Exhaust Systems

From $1,074.99

• MBRP manufactures all their Single and Dual Exhaust Systems to the highest quality standards to give you a system that not only provides you power and mileage increases but one that can stand up to the demands of the extreme off roader with out falling apart. These systems feature 100% mandrel bent tubing and the lowest degree of bends.
• California Residents: WARNING

MBRP PLM Series Turbo Back Single Side Exit Exhaust System

From $346.74

• MBRP manufactures all their Single and Dual Exhaust Systems to the highest quality standards to give you a system that not only provides you power and mileage increases but one that can stand up to the demands of the extreme off roader with out falling apart. These systems feature 100% mandrel bent tubing and the lowest degree of bends.
• California Residents: WARNING

Synergy Manufacturing Steering Box Brace

From $10.00

• Steering Box Brace
• Laser cut
• CNC bent
• precision welded
• 1/4" Steel
• Black powder coat finish for maximum corrosion resistance
• 100% Bolt-on installation
• No cutting or drilling required
• Make in the USA
• Note: When using an upgraded 09+ Steering Box, 8559-04 is the steering box brace needed, BUT, modifications will need to be made to the upgraded steering box mounts for proper fitment of the brace.
• California Residents: WARNING

Synergy Manufacturing Adjustable Front Lower Control Arms

From $500.00

Synergy Manufacturing Jeep JK Stabilizer Relocation Kit

From $60.00

• Designed to relocate a Fox/Synergy Suspension steering stabilizer up and out of harms way on a JK
• Includes grade 8 hardware
• Manufactured from high strength 3/16 inch steel
• Powdercoated for corrosion resistance
• Factory clamp cannot be flipped, it will interfere with the diff cover
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Air Compressor Brackets

From $60.00

• Synergy Manufacturing Air Compressor Brackets easily bolt on mount to supply a spot to mount an onboard air compressor under the hood of your JK
• Works with VIAIR 100, 400, & 450 series compressors
• California Residents: WARNING

Synergy Manufacturing Front Upper Control Arms

From $320.00

Synergy Manufacturing 2.0 Inch Air Bump Cans

From $60.00

• Air Bump Mounting Can
• Fits Bilstein, Fox, and SAW 2.0 Air Bumps
• 1026 DOM tubing
• California Residents: WARNING

Synergy Manufacturing Adjustable Steering Column

From $15.00

• Allows for easy adjustment of steering column
• Laser cut from 3/16 inch steel
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Front Long Arm Upper Control Arms

From $490.00

Synergy Manufacturing Heavy Duty Metal-on-Metal Tie Rod End

From $60.00

• Fully greasable sintered metal on metal bushing design
• Tie Rod end boot is made from silicone and polyurethane
• 7/8-18 UNF LH Thread
• Spring loaded bearing design keeps pressure on bearings
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Control Arm Mounts

From $125.00

• Synergy Manufacturing Weld-On HD Front Lower Control Arm Mounts heavy duty 3 sided construction and laser cut/CNC bent from 3/16" high strength steel to provide maximum rigidity
• Brackets comes with additional mounting holes so that the control arms can be mounted 1" higher than stock for additional clearance
• Synergy Manufacturing Weld-On HD Front Lower Control Arm Mounts hole size is 9/16" and a mounting width of 2-5/8
• California Residents: WARNING

MBRP Cat Back Single Side Exit Exhaust System

From $609.99

• MBRP is the performance exhaust of choice for the enthusiast who needs a system that can take anything that the road throws at it. This system's rugged construction can be counted on to withstand everything on and off-road
• California Residents: WARNING

Synergy Manufacturing Front Dana 30 Inner C-Gusset Kit

From $100.00

• Brackets are laser cut and CNC bent from 3/16 inch high strength carbon steel
• Heavy duty 3 sided construction provides for a VERY rigid bracket
• 1 Kit will Made in the U.S.A.
• California Residents: WARNING

Synergy Manufacturing Limit Straps

From $25.00

• Limit Straps
• 8" up to 20" inch Lengths Hole to Hole
• Plated end fittings are made from tough 4130 steel and have 1/2" hole
• U.S. made 1.75" nylon webbing with a 7000 lb. rating and superior flexibility
• Quad wrap (ultra strength)
• Eyelets have an integrated deflector clip to minimize abrasion
• Sold individually
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Heavy Duty Fixed Front Lower Control Arms

From $315.00

Synergy Manufacturing Radius Axle Link Brackets

From $1,000.00

• Synergy Manufacturing Radius Axle Link Brackets are designed to be used on an axle housing with a 3" diameter
• The link brackets are laser cut and CNC bent from 1/4" carbon steel
• The heavy duty 3 sided construction provides for a VERY rigid bracket and is designed to be used with any of our large rod ends with our high misalignment spacers & all of our rebuildable spherical bearing assemblies
• California Residents: WARNING

Synergy Manufacturing Track-Bar Conversion Kit for Dodge

From $500.00

• Eliminates the weak link in the otherwise stout 4x4 Dodge chassis
• Converts the stock ball-joint style TB to the newer 03-current bushing style track-bar
• Compatible on trucks with -1 inch lift to +3 inch of lift
• Tightens up steering and suspension feel and helps eliminate dreaded inchDeath Wobble inch
• Laser cut, CNC bent and precision welded
• Grey Powdercoat finish for maximum corrosion resistance
• Bolt on installation
• Make in the USA
• California Residents: WARNING

MBRP Pro Series Cat Back Single Side Exit Exhaust System

From $839.99

• MBRP manufactures all their Single and Dual Exhaust Systems to the highest quality standards to give you a system that not only provides you power and mileage increases but one that can stand up to the demands of the extreme off roader with out falling apart. These systems feature 100% mandrel bent tubing and the lowest degree of bends.
• California Residents: WARNING