RockJock 4x4 Johnny Joint Front Trac Bar - RJ-9120FJKF

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Johnny Joint Front Trac Bar Assembly
• (2) Rubber Washers (outboard of the Johnny Joint at the frame end to encourage the bar to re-center itself after articulating)
• Factory hardware is retained to attach the trac bar to the axle and the chassis
• Bar is forged from chromoly in an organic shape to allow for maximum travel and ample clearance when used with aftermarket 1 ton diffs
• Adjuster features 1 in.-14 RH threads
• Johnny Joints on both ends are rebuildable, should the need ever arise
• Applicable Johnny Joint Tool for this Trac Bar: CE-9112T
• Johnny Joints require non-synthetic, hi-moly lube grease such as our CE-9013G
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock 4x4 Johnny Joint Front Trac Bar - RJ-9120FJLF

• Fitment: Direct Fit
• 18-Current Wrangler JL, 2 & 4 Door
• 20-Current Gladiator JT
• Johnny Joint Front Trac Bar Assembly
• (2) Rubber Washers (outboard of the Johnny Joint at the frame end to encourage the bar to re-center itself after articulating)
• Adjustment Range: Closed 33.234 in., Extended 34.750 in.
• Factory hardware is retained to attach the trac bar to the axle and the chassis
• Bar is forged from chromoly in an organic shape to allow for maximum travel and ample clearance when used with aftermarket 1 ton diffs
• Adjuster features 1 in.-14 RH threads
• Flex Axis Joint is replaceable, as a unit (presses in and out of gold end forging)
• Applicable Johnny Joint Tool for this Trac Bar: CE-9112T
• Johnny Joints require non-synthetic, hi-moly lube grease such as our CE-9013G
• *** This bar supersedes our CE-9120FJL Trac Bar! ***
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock 4x4 High Steer Knuckle Kit - RJ-440001-101

• Fitment: Direct Fit
• 18-Current Wrangler JL, 2 & 4 Door
• 20-Current Gladiator JT
• For use on any Rubicon/Mojave width factory JL or JT front differential
• Left side high steer steering knuckle
• Right side high steer steering knuckle
• Currectlync drag link
• Currectlync tie rod
• Trac bar relocation and stabilizer shock mount axle bracket
• Stabilizer shock tie rod clamp
• All required hardware and step-by-step instructions
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock 4x4 Pro Edition 4" Suspension System - RJ-JK2DR1-101

• Fitment: Direct Fit
• JK Wrangler (2-door) All Models
• 4 in. Lift Dual-Rate Front And Rear Springs
• 8 Johnny Joint Adjustable Control Arms
• Johnny Joint Adjustable Front Trac Bar (forged, organically shaped)
• Johnny Joint Adjustable Rear Trac Bar
• Front and Rear Trac Bar Geometry Correction Brackets
• Front and Rear Bump Stop Kits
• Front and Rear Adjustable Sway Bar Links w/ Sealed Ends
• Front and Rear Brake Line Relocation Brackets
• Dropped Pitman Arm
• Rear Shock Relocator Kit
• All Required Hardware
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock 4x4 Currectlync Modular Exteme Duty Universal 1 Ton Tie Rod - JK-9703TRL

• Fitment: Direct Fit
• Universal Application 1 ton front differentials w/ 1 ton taper at the knuckles
• (1) Modular Extreme Tie Rod Assembly
• Adjustment Range: Closed 57.500 in., Open 60.500 in.
• Tie Rod Tube = 1 5/8 in. dia. 4130 heat treated chromoly
• Tie Rod End Forgings = 1 1/4 in.-12 RH/LH threads, forged steel
• Rod End Cartridges = 1 ton taper on the pin, 1 3/4 in.-12 threads on the O.D. and 9/16 in.-18 threads on the pin
• California Residents: WARNING
+ View More Specs - View Less Specs

Motive Gear AMC Model 20 Carrier Shim Kit - MID1101

• Fitment: Universal Fit
• For use in AMC Model 20 axles
• Helps set ring and pinion pattern and set back lash
• California Residents: WARNING

Motive Gear Chrysler 8.25 Inch 10 Bolt 2.71 Ratio Ring and Pinion - C8.25-271

• Fitment: Universal Fit
• For Use With 2.71 and Up Carrier
• Forged 8620 Steel
• Heat Treated
• California Residents: WARNING

Motive Gear Dana 44 Front Reverse 3.73 Ratio Ring and Pinion - D44-373F

• Fitment: Universal Fit
• For Use With 3.73 And Down Carrier
• Forged 8620 Steel
• Heat Treated
• California Residents: WARNING

Motive Gear GM 8.5 Inch 10 Bolt 28 Spline Full Spool - FS10-28

• Fitment: Universal Fit
• For Use With 28 Spline Axles
• For Use With All Gears
• Requires Use
• Of C-Clip Eliminator Kit
• Not Recommended For Street Use
• California Residents: WARNING
+ View More Specs - View Less Specs

Motive Gear GM 8.5 Inch 10 Bolt 30 Spline Full Spool - FS10-30

• Fitment: Universal Fit
• For Use With 30 Spline Axles
• For Use With All Gears
• Requires Use
• Of C-Clip Eliminator Kit
• Not Recommended For Street Use
• California Residents: WARNING
+ View More Specs - View Less Specs

Motive Gear GM 8.875 Inch 12 Car Bolt 4.10 Full Spool - FS12-30

• Fitment: Universal Fit
• For Use With 30 Spline Axles
• For Use With 4.10 Up Gears
• Requires Use
• Of C-Clip Eliminator Kit
• Not Recommended For Street Use
• California Residents: WARNING
+ View More Specs - View Less Specs

Motive Gear Ford 8.8 Inch 31 Spline Full Spool - FS8.8-31

• Fitment: Universal Fit
• For Use With 31 Spline Axles
• For Use With All Gears
• Requires Use
• Of C-Clip Eliminator Kit
• Not Recommended For Street Use
• California Residents: WARNING
+ View More Specs - View Less Specs

Motive Gear Ford 9 Inch 28 Spline Light Weight Full Spool - FS9-28LW

• Fitment: Universal Fit
• For Use With 28 Spline Axles
• For Use With All Gears
• For Use In 3.062 Case Bore
• Not Recommended For Street Use
• California Residents: WARNING
+ View More Specs - View Less Specs

Motive Gear Ford 9 Inch 31 Spline Light Weight Full Spool - FS9-31LW

• Fitment: Universal Fit
• For Use With 31 Spline Axles
• For Use With All Gears
• For Use In 3.062 Case Bore
• Not Recommended For Street Use
• California Residents: WARNING
+ View More Specs - View Less Specs

Motive Gear Dana 44 30 Spline 3.92 Up Full Spool - FSD44-30

• Fitment: Universal Fit
• For Use With 30 Spline Axles
• For Use With 3.92 And Up Gears
• Not Recommended
• For Street Use
• Not Recommended For Street Use
• California Residents: WARNING
+ View More Specs - View Less Specs

Motive Gear Dana 60 35 Spline 4.10 Down Full Spool - FSD60-35H

• Fitment: Universal Fit
• For Use With 35 Spline Axles
• For Use With 4.10 And Down Gears
• Not Recommended
• For Street Use
• Not Recommended For Street Use
• California Residents: WARNING
+ View More Specs - View Less Specs

Motive Gear Dana 60 35 Spline 4.56 Up Full Spool - FSD60-35L

• Fitment: Universal Fit
• For Use With 35 Spline Axles
• For Use With 4.56 And Up Gears
• Not Recommended
• For Street Use
• Not Recommended For Street Use
• California Residents: WARNING
+ View More Specs - View Less Specs

Motive Gear GM 8.5 10 Inch Bolt 28 Spline Mini Spool - MS10-28