Synergy Manufacturing High Steer Drag Link

From $450.00

Synergy Manufacturing Wheel Spacers

From $110.00

• Wheel hub centric for increased strength (-H part numbers only)
• CNC machined from billet 6061-T6 aluminum
• Features corrosion resistant red anodizing
• Can be used with factory or after market wheels
• Adapters are 1.50" wide
• Includes Loctite
• Sold as a pair

Synergy Manufacturing Ball Joints

From $250.00

Synergy Manufacturing Tie Rods

From $350.00

Synergy Manufacturing Axle Housing Inner Sleeve Kit

From $150.00

• Designed to increase the strength of the front Axle housing which is prone to bending when larger off road tires are installed and used off road
• Inner Axle Sleeves add a 57% increase in strength over stock
• The stock axle housing must be drilled and plug welded for installation
• California Residents: WARNING

Synergy Manufacturing Skid Plates

From $1,335.00

• Jeep skid plates manufactured from 3/16" crush resistant Grade A-572 Steel plate
• Flush mounted hardware provides a 100% smooth skid surface
• Premium powdercoat finish for maximum corrosion resistance
• Allows access to drain plug without removal
• Made in the USA
• California Residents: WARNING

Mountain Off-Road Enterprises Hide-A-Steps

From $162.29

• Proudly made in the USA.
• Sold individually.
• Class IV zinc plating protects against harsh winter conditions and road hazards.
• California Residents: WARNING

Synergy Manufacturing Tie Rod Clamps

From $75.00

• CNC machined from 1020 DOM material
• 100% bolt on
• Zinc plated for corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Front Track Bar & Sector Shaft Brace Kit

From $275.00

• Front Track Bar & Sector Shaft Brace Kit
• 2 and 4-door models
• Includes SYN8069-01 & SYN8069-02
• Steering Sector Brace
• Track bar brace
• Laser cut and CNC bent from 3/16" high strength steel
• Gray powder coat finish for maximum corrosion resistance
• Bolt on installation
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Suspension Systems

From $1,070.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry.
• All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Front Track Bar Relocation Bracket

From $220.00

• This bracket raises the vehicle's axle side track bar mount
• Heavy-duty
• Special bolt-on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Mountain Off-Road Enterprises Stage 1 Steering Correction Kits

From $194.99

• All bolts, nuts, spacers, cotter pins, and instructions.To be used with kit 9930 and 9940.
• California Residents: WARNING

Mountain Off-Road Enterprises Bomb Proof Motor Mounts

From $121.33

• This motor mount kit is designed for your vehicle, creating a crossmember with the engine
• Improves clutch linkage operation
• Beef up your vehicle for serious wheelin
• Mounts the engine its stock location
• California Residents: WARNING

Mountain Off-Road Enterprises Skid Plates

From $178.82

• Jeep skid plates with bolt on application
• Black powder coat
• Laser cut out of 3/16 inch plate
• Hardware included
• California Residents: WARNING

Synergy Grab Handles

From $100.00

• Powder coat finish eliminates corrosion that can occur under extreme element. Includes all hardware necessary for a quick and easy installation. Compatible with both hard and soft tops3
• California Residents: WARNING

Synergy Manufacturing Rear Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of rear axle when running a suspension lift
• 100% bolt on
• Rear track bar relocation bracket for lifts taller than 4.5 inch
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Shock Mounts

From $100.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Adjustable Front Lower Control Arms

From $500.00

Synergy Manufacturing Air Compressor Brackets

From $60.00

• Synergy Manufacturing Air Compressor Brackets easily bolt on mount to supply a spot to mount an onboard air compressor under the hood of your JK
• Works with VIAIR 100, 400, & 450 series compressors
• California Residents: WARNING

Mountain Off-Road Drag Links

From $423.68

• 1" O.D. x .219-wall DOM steel tubing
• Threaded on each end for 5/8 left and right rod ends
• Wrench flats on each end
• Teflon/Kevlar lined
• Self lubricating and the alloy steel heat treated body
• Jam nuts and grade-8 hardware included
• Available in bare steel or zinc-plated
• California Residents: WARNING

Mountain Off-Road Enterprises Shackle Reverse Systems

From $217.48

• Why install a S.R.S., because it allows the front suspension to travel in a much more natural action when the spring compresses
• At higher speeds, a smoother ride and improved handling is noticeable, as well as less wandering and darting
• They move the front axle forward from the stock position, so that during spring compression over obstacles the tire will be less likely to contact the fender
• California Residents: WARNING

Synergy Manufacturing Adjustable Steering Column

From $15.00

• Allows for easy adjustment of steering column
• Laser cut from 3/16 inch steel
• Made in the USA
• California Residents: WARNING

Mountain Off-Road Enterprises Lubeable Leaf Spring Shackles

From $128.60

• Lubeable shackles are made from 3/8" thick steel
• Thick walled center brace bolts in place with grade 5 hardware
• Shackle bolts are drilled and fitted with a zerk to allow the grease to flow into the "channeled" black polyurethane bushings
• Crimp-Loc nuts keep all parts clamped in place
• Sold as a pair
• California Residents: WARNING

Synergy Manufacturing Heavy Duty Metal-on-Metal Tie Rod End

From $60.00

• Fully greasable sintered metal on metal bushing design
• Tie Rod end boot is made from silicone and polyurethane
• 7/8-18 UNF LH Thread
• Spring loaded bearing design keeps pressure on bearings
• Made in the U.S.A
• California Residents: WARNING