Nitto Trail Grappler M/T Tires

From $1,059.00

• Overall Diameter range of 35 to 40 inch tall tires
• Rim Range of 15 to 24 inch diameter
• Black Sidewall
• Tread Type: Mud Terrain
• California Residents: WARNING

Nitto Ridge Grappler Tires

From $222.00

• Overall Diameter range of 32 to 37 inch tall tires
• Rim Range of 17 to 20 inch diameter
• Black Sidewall
• Tread Type: Hybrid Terrain
• California Residents: WARNING

Nitto Terra Grappler G2 Tires

From $153.00

• Overall Diameter range of 29 to 37 inch tall tires
• Rim Range of 17 to 22 inch diameter
• Black Sidewall
• Tread Type: All Terrain
• California Residents: WARNING

Nitto Terra Grappler Tires

From $176.00

• Overall Diameter range of 30 to 37 inch tall tires
• Rim Range of 16 to 24 inch diameter
• Black Sidewall
• Tread Type: All Terrain
• California Residents: WARNING

TeraFlex CRD60 HD Axle Assemblies

From $2,620.99

• Tera CRD60 specific high-pinion rear axle housing design
• HD bearing caps increase rigidity and reduce ring and pinion distortion
• Constant Radius Design (CRD) provides maximum ground clearance regardless of pinion angle
• Built-in “skimmer” cuts ring gear oil halo and forces it into the pinion bearings
• Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing
• Oversized outer pinion bearing handles increased torque and high-load conditions
• High-capacity housing holds maximum amount of oil
• Asymmetric housing design for extra-long tube side strength
• Pre-installed inner axle seals
• Ductile cast iron housing with increased rib gussets
• HD ductile iron differential cover with increased cover mounting area
• Integrated lower control arm skid plates
• High-flow oil passages
• Bottom oil drain hole for simple fluid changes
• Reinforced rear track bar mount with multiple mounting locations
• UV protected triple-stage powder coat for corrosion resistance
• 1/4”-thick CNC laser cut axle brackets for extreme strength
• Pre-installed upper control arm bushings
• Proper pinion angle for lifted applications
• Features a raised pinion angle and raised track bar bracket
• Pre-tapped hole on spring perch for bump stop extensions
• Pre-drilled holes for limit straps and lower spring retainers
• Retains all ESP, ABS, and speedometer sensor capability
• 100% engineered, designed, and built in the USA with new components

Nitto Dura Grappler Tires

From $222.00

• Overall Diameter range of 30 to 35 inch tall tires
• Rim Range of 16 to 22 inch diameter
• Black Sidewall
• Tread Type: All Terrain
• California Residents: WARNING

TeraFlex NP231 Extreme Short Shaft Kit

From $9.99

• Extreme Short Shaft Kit
• With 231 transfer case
• Eliminates slip yoke
• Requires a longer CV style drive shaft
• California Residents: WARNING

TeraFlex Sway Bar Links

From $16.99

• Sway Bar Links
• Teraflex Front Links when connected provides immediate reaction during sway bar loading to eliminate excess play
• Rear Links are designed to reduce clearance issues between the tire and rear sway bar
• Available for different lift heights and fixed or quick disconnect styles
• California Residents: WARNING

Nitto Exo Grappler AWT Tires

From $289.00

• Overall Diameter range of 32 to 35 inch tall tires
• Rim Range of 17 to 20 inch diameter
• Black Sidewall
• Tread Type: All Terrain
• California Residents: WARNING

TeraFlex Short Shaft SYE

From $11.99

• Eliminates slip yoke and need for transfer case drop
• Withstands 50% more torque
• Increases rear drive shaft length by 4 inch
• Requires use of CV style rear drive shaft
• California Residents: WARNING

Nitto NT420S Tires

From $187.00

• The NT420S performance tire is designed for your truck or SUV
• Available in many plus-sized wheel fitments, this tire is designed to complement both your factory original and aftermarket wheels
• The tire features a non-directional, asymmetrical pattern that can be cross-rotated so it wears more evenly
• This feature also helps provide a quieter, more comfortable ride and longer tread life
• California Residents: WARNING

TeraFlex Disc Brake Kit

From $7.99

• Disc Brake Kit
• Bolt-on upgrade to replace factory Jeep drum brakes
• Dana 35 c-clip, Dana 44 and Chrysler 8.25
• Kits Includes Rotors
• Backing Plates with Integrated Park Brake
• Calipers
• Brake Pads
• Hardware
• California Residents: WARNING

TeraFlex Heavy-Duty Tie Rod

From $215.99

• Tie Rod
• Heavy-Duty
• 1-1/2 inch hexagon 6061 T6 aluminum
• For use with Dana 30 high steer knuckle
• Small taper
• California Residents: WARNING

TeraFlex Rear Disc Brake Conversion

From $7.99

• Rear Disc Brake Conversion
• Non C-clip and D-44 rear axles
• Improves stopping power
• Bolt-on installation
• Kit includes everything needed to convert to disc brakes
• California Residents: WARNING

TeraFlex Revolver Crush Cushion

From $7.99

• Replace your worn Revolver Shackle components, and restore complete functionality
• The UHMW nylon cushion keeps the Revolver shackle properly positioned when folded in the closed/resting position
• Sold Individually
• California Residents: WARNING

TeraFlex Sway Bar Bushing Kit

From $24.99

• This TeraFlex Bushing Ball Replacement Kit is designed to serve as direct replacements for the TeraFlex brand quick disconnect swaybar link bushings
• The polyurethane bushings are specifically designed for easy replacing
• California Residents: WARNING

Nitto Recon Grappler A/T Tires

From $263.00

• Sizes: 32"-37" diameterSide Wall: Black
• Max Load: 3000-3970 lbs
• Tread Type: All Terrain

Nitto Nomad Grappler Tires

From $181.00

• Nitto’s 60,000-mile limited treadwear warranty
• 3PMS rated for additional all-weather capability
• California Residents: WARNING

Nitto NT420V Tires

From $177.00

Nitto NT421Q Tires

From $148.00

TeraFlex Base Lift Kits

From $1,049.99

• Depending On Lift Height And Vehicle Model Kits Typically Include:
• Dropped Pitman Arm
• Front Sway Bar Disconnects
• Rear Sway Bar Links
• Rear Track Bar Bracket
• Bump Stops
• Brake Line Extension Brackets
• All Necessary Hardware
• California Residents: WARNING

TeraFlex Rubber Bushings

From $21.99

• The TeraFlex TJ rear upper small FlexArm rubber Joint provides excellent off-road capabilities with articulation and durability
• The rubber bushing provides superior vibration damping, reduces road noise, eliminates clunks, and maintains proper position for maximum articulation during travel
• Sold Individually
• California Residents: WARNING

TeraFlex Tera44 HD Axle Assemblies

From $2,974.99

• 3.25” O.D. x 0.25” wall axle tube increases torsional strength to resist bending with minimal weight increase
• Asymmetric housing design for extra-long tube side strength
• Pre-installed inner axle seals
• HD forged inner knuckles with greater upper and lower section strength
• Ductile cast iron housing with increased rib gussets
• HD ductile iron differential cover
• Smooth radius bottom design to glide over rocks and obstacles
• Integrated lower control arm skid plates
• High-flow oil passages and bottom oil drain hole for simple fluid changes
• Reinforced front track bar mount (ties into spring pad) for greater strength
• UV protected triple-stage powder coat for corrosion resistance
• 1/4”-thick CNC laser cut axle brackets for extreme strength
• Integrated factory location upper control arm mount
• Pre-installed upper control arm bushings
• Proper pinion angle for lifted applications
• Pre-tapped hole on spring perch for bump stop extensions
• Pre-drilled holes for limit straps and lower spring retainers
• Retains all ESP, ABS, and speedometer sensor capability
• 100% engineered, designed, and built in the USA with new components

TeraFlex Flexarm Suspension Systems

From $1,828.99

• Includes Lift Coil Springs
• Front Adjustable Track Bar
• Shock Absorbers (Depending On Kit)
• Lower And Upper Adjustable Flexarms (Depending On Kit)
• Front Sway Bar Disconnects
• Rear Sway Bar Links
• Rear Track Bar Bracket
• Bump Stops And All Necessary Hardware
• California Residents: WARNING