Poison Spyder DeFender XC High-Line Fenders

From $679.99

• Available in bare steel or aluminum
• 3” tapered flare
• Made from 3/16" steel plate
• Highline fender offers 3" of additional clearance
• Mounting location for a 3/4” LED marker
• California Residents: WARNING

Poison Spyder Recovery Straps

From $71.99

• 30 feet long by 3 inches wide*
• Industrial strength nylon webbing
• 24,250 lbs. minimum breaking strength**
• Reinforced, stitched loop protectors
• Thermofixed & treated for long wear
• Stretches up to 20% to absorb shock loads
• Laboratory tested for strength & quality
• California Residents: WARNING

Poison Spyder Rear License Plate Delete Covers

From $11.99

• Jeep License plate Delete Plug
• California Residents: WARNING

Poison Spyder LED License Plate and 3rd Brake Light Kits

From $49.99

• Mount a combination license plate and 3rd brake light to your license plate
• Bright light with low power draw
• Mounts to the two upper license plate bolts
• Electrical connectors are included
• Includes a short pigtail, suitable for use when the license plate is mounted at or near the stock location
• California Residents: WARNING

Poison Spyder Rear Stinger Tire Carriers

From $769.99

• The Poison Spyder Rear Stinger Jeep rear bumper is designed for those who spend most of their time in the rocks and need a tire carrier that meets the challenge.
• By pulling the two upper pins,The Rear Stinger is basically a fold-down spare tire carrier.
• This part number is for the "DIY" Rear Stinger Tire Carrier without the Lower Mount Plate.
• The Tire Carrier includes an integrated skid plate with laser cut lightning holes and Spyder logo.
• It also has an integrated license plate mount located in the center of the carrier.
• Tabs for the lower straps and a loop for the upper strap provide a secure mount for the 3-Way Spare Tire Strap.:This product ships as bare steel—it will need to be painted or powder coated prior to final installation as your Wrangler rear bumper.
• California Residents: WARNING

Synergy Manufacturing High Steer Drag Link

From $450.00

Poison Spyder Hood Logo Decals

From $59.99

• Available in black, silver, white or red
• California Residents: WARNING

Poison Spyder BFH II Front Bumpers

From $629.99

• Lightweight, high clearance "stubby" bumper design
• Made of 1.5" X .120" wall DOM tubing with 3/16" plate steel gussets
• SpyderShell Armor Coat semi-gloss black finish
• Recessed light buckets accept OE fog lamps or Rigid Industries Dually's by use of adapter plate (sold separately)
• High clearance recovery shackle tabs CNC machined from 1" thick plate steel
• California Residents: WARNING

Synergy Manufacturing Wheel Spacers

From $110.00

• Wheel hub centric for increased strength (-H part numbers only)
• CNC machined from billet 6061-T6 aluminum
• Features corrosion resistant red anodizing
• Can be used with factory or after market wheels
• Adapters are 1.50" wide
• Includes Loctite
• Sold as a pair

Synergy Manufacturing Ball Joints

From $250.00

Synergy Manufacturing Tie Rods

From $350.00

Poison Spyder Chrome Spyder Emblems

From $12.99

• Weatherproof and fade proof
• Automotive grade plastic
• Uses 3M weatherproof adhesive
• California Residents: WARNING

Poison Spyder RockBrawler Bumpers

From $579.99

• This bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design.
• The ends of the bumper extend far enough to protect the lower corner of the grille, but not far enough to hinder tire clearance or tire access to vertical obstacles.
• The two D-ring shackle mounts are CNC-machined from 1 inch plate steel to provide brute strength for the most demanding recovery operations.
• Accepts most major manufacturer's winches up to 15,000 lbs. capacity
• Recessed light mounts are provided for retention of the factory fog lamps or aftermarket off-road lamps
• California Residents: WARNING

Poison Spyder Windshield Decals

From $59.99

• Available in black, silver, white or red
• California Residents: WARNING

Synergy Manufacturing Axle Housing Inner Sleeve Kit

From $150.00

• Designed to increase the strength of the front Axle housing which is prone to bending when larger off road tires are installed and used off road
• Inner Axle Sleeves add a 57% increase in strength over stock
• The stock axle housing must be drilled and plug welded for installation
• California Residents: WARNING

Synergy Manufacturing Steering Correction Kit

From $425.00

Synergy Manufacturing Skid Plates

From $1,335.00

• Jeep skid plates manufactured from 3/16" crush resistant Grade A-572 Steel plate
• Flush mounted hardware provides a 100% smooth skid surface
• Premium powdercoat finish for maximum corrosion resistance
• Allows access to drain plug without removal
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Tie Rod Clamps

From $75.00

• CNC machined from 1020 DOM material
• 100% bolt on
• Zinc plated for corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Poison Spyder 3-Way Spare Tire Straps

From $79.99

• Designed for Poison Spyder tire carrier
• Ratchet strap design
• Built for rigorous wheeling
• California Residents: WARNING

Synergy Manufacturing Front Track Bar & Sector Shaft Brace Kit

From $275.00

• Front Track Bar & Sector Shaft Brace Kit
• 2 and 4-door models
• Includes SYN8069-01 & SYN8069-02
• Steering Sector Brace
• Track bar brace
• Laser cut and CNC bent from 3/16" high strength steel
• Gray powder coat finish for maximum corrosion resistance
• Bolt on installation
• Made in the USA
• California Residents: WARNING

Poison Spyder LED Tail and Reverse Lights with Wiring Harnesses Kits

From $29.99

• Exclusive Plug-N-Play Design
• Supports 4 Inch Round LED Tailights
• Supports 2 1/2 Inch Round LED Back-Up lamps
• Supports LED License Plate and Third Brake Light
• California Residents: WARNING

Synergy Manufacturing Suspension Systems

From $1,070.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry.
• All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Front Track Bar Relocation Bracket

From $220.00

• This bracket raises the vehicle's axle side track bar mount
• Heavy-duty
• Special bolt-on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Synergy Manufacturing Steering Kits

From $1,050.00

• Requires a minimum of 2 inch front bump stop spacers
• 100% bolt-on
• Powdercoat finish for maximum durability and corrosion resistance
• Made in the U.S.A
• California Residents: WARNING