TeraFlex CRD60 HD Axle Assemblies

From $2,620.99

• Tera CRD60 specific high-pinion rear axle housing design
• HD bearing caps increase rigidity and reduce ring and pinion distortion
• Constant Radius Design (CRD) provides maximum ground clearance regardless of pinion angle
• Built-in “skimmer” cuts ring gear oil halo and forces it into the pinion bearings
• Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing
• Oversized outer pinion bearing handles increased torque and high-load conditions
• High-capacity housing holds maximum amount of oil
• Asymmetric housing design for extra-long tube side strength
• Pre-installed inner axle seals
• Ductile cast iron housing with increased rib gussets
• HD ductile iron differential cover with increased cover mounting area
• Integrated lower control arm skid plates
• High-flow oil passages
• Bottom oil drain hole for simple fluid changes
• Reinforced rear track bar mount with multiple mounting locations
• UV protected triple-stage powder coat for corrosion resistance
• 1/4”-thick CNC laser cut axle brackets for extreme strength
• Pre-installed upper control arm bushings
• Proper pinion angle for lifted applications
• Features a raised pinion angle and raised track bar bracket
• Pre-tapped hole on spring perch for bump stop extensions
• Pre-drilled holes for limit straps and lower spring retainers
• Retains all ESP, ABS, and speedometer sensor capability
• 100% engineered, designed, and built in the USA with new components

TeraFlex NP231 Extreme Short Shaft Kit

From $9.99

• Extreme Short Shaft Kit
• With 231 transfer case
• Eliminates slip yoke
• Requires a longer CV style drive shaft
• California Residents: WARNING

TeraFlex Sway Bar Links

From $16.99

• Sway Bar Links
• Teraflex Front Links when connected provides immediate reaction during sway bar loading to eliminate excess play
• Rear Links are designed to reduce clearance issues between the tire and rear sway bar
• Available for different lift heights and fixed or quick disconnect styles
• California Residents: WARNING

TeraFlex Short Shaft SYE

From $11.99

• Eliminates slip yoke and need for transfer case drop
• Withstands 50% more torque
• Increases rear drive shaft length by 4 inch
• Requires use of CV style rear drive shaft
• California Residents: WARNING

TeraFlex Disc Brake Kit

From $7.99

• Disc Brake Kit
• Bolt-on upgrade to replace factory Jeep drum brakes
• Dana 35 c-clip, Dana 44 and Chrysler 8.25
• Kits Includes Rotors
• Backing Plates with Integrated Park Brake
• Calipers
• Brake Pads
• Hardware
• California Residents: WARNING

TeraFlex Heavy-Duty Tie Rod

From $215.99

• Tie Rod
• Heavy-Duty
• 1-1/2 inch hexagon 6061 T6 aluminum
• For use with Dana 30 high steer knuckle
• Small taper
• California Residents: WARNING

TeraFlex Rear Disc Brake Conversion

From $7.99

• Rear Disc Brake Conversion
• Non C-clip and D-44 rear axles
• Improves stopping power
• Bolt-on installation
• Kit includes everything needed to convert to disc brakes
• California Residents: WARNING

TeraFlex Revolver Crush Cushion

From $7.99

• Replace your worn Revolver Shackle components, and restore complete functionality
• The UHMW nylon cushion keeps the Revolver shackle properly positioned when folded in the closed/resting position
• Sold Individually
• California Residents: WARNING

TeraFlex Sway Bar Bushing Kit

From $24.99

• This TeraFlex Bushing Ball Replacement Kit is designed to serve as direct replacements for the TeraFlex brand quick disconnect swaybar link bushings
• The polyurethane bushings are specifically designed for easy replacing
• California Residents: WARNING

TeraFlex Base Lift Kits

From $1,049.99

• Depending On Lift Height And Vehicle Model Kits Typically Include:
• Dropped Pitman Arm
• Front Sway Bar Disconnects
• Rear Sway Bar Links
• Rear Track Bar Bracket
• Bump Stops
• Brake Line Extension Brackets
• All Necessary Hardware
• California Residents: WARNING

TeraFlex Sport ST2 Suspension Systems

From $1,201.99

• Delivers True Street & Trail (S/T) Performance
• Install & Drive Simple Bolt-On Installation
• Dependable Performance With Zero Worries
• Positive, Responsive Handling
• Reduced Vibration & Harshness
• Preset Front Lower Sport Flexarms Optimize Correct Caster & Pinion Angles
• High Quality, Factory Style Bushings Provide Excellent Vibration Damping & Ride Quality With Zero Maintenance
• Speedbump Progressive Bump Stops
• No Alignment Or Adjustment Required
• Teraflex Lifetime Warranty
• Fits Up To 35” Tires
• California Residents: WARNING

TeraFlex Flexarm Suspension Systems

From $1,828.99

• Includes Lift Coil Springs
• Front Adjustable Track Bar
• Shock Absorbers (Depending On Kit)
• Lower And Upper Adjustable Flexarms (Depending On Kit)
• Front Sway Bar Disconnects
• Rear Sway Bar Links
• Rear Track Bar Bracket
• Bump Stops And All Necessary Hardware
• California Residents: WARNING

TeraFlex Falcon 1.1 Monotube Shocks

From $460.00

Raceline Wheels RT232 Monster Beadlock Machined / Black Wheels

From $589.00

• Sizes: 15", 17"
• Bolt Patterns: 5, 6, 8 lugs
• Finish: Machined Face with Black Accents
• Max Load: 2200-2800 lbs
• Construction: Cast Aluminum

Raceline Wheels Aero Series Machined Wheels

From $249.00

• Machined
• Available in both 16” and 17” diameters for most trucks
• Hub centric fitments available for select vehicles.

Raceline Wheels 952MC Aero Machined Clear Coat Wheels

From $249.00

• 952MC Aero
• Finish: Machined Clear Coat

Raceline Wheels 953B Krank Satin Black Wheels

From $289.00

• 953B Krank
• Finish: Satin Black

Raceline Wheels Krank Series Satin Black Wheels

From $319.00

• Available in Satin Black and Bronze finishes
• Black-Out bolt on cap with contrasting embossed Raceline logo
• Available in 16”, 17” and 18” diameters for most trucks.

Raceline Wheels Krank Series Bronze Wheels

From $335.00

• Available in Satin Black and Bronze finishes
• Black-Out bolt on cap with contrasting embossed Raceline logo
• Available in 16”, 17” and 18” diameters for most trucks.

Raceline Wheels 953BZ Krank Bronze Wheels

From $309.00

• 953BZ Krank
• Finish: Bronze

Raceline Wheels 954M Stryker Satin Black Milled Wheels

From $457.00

• 954M Stryker
• Finish: Satin Black Milled

Raceline Wheels 955M Warp Gloss Black Milled Wheels

From $499.00

• 955M Gloss Black Milled Wheels

Raceline Wheels Raptor Series Satin Black Wheels

From $299.00

• Available in 16, 17, 18 and 20 inch diameters
• Satin black finish
• 5, 6 or 8 lug bolt patterns available

Raceline Wheels Raptor Series Machined with Black Wheels

From $235.00

• Available in 16, 17, 18 and 20 inch diameters
• Machined with black finish
• 5, 6 or 8 lug bolt patterns available