Rear

REFINE BY:

Brand

Fitment

Direct Fit (104)
Universal Fit (6)

Axle Spline

35 Splines (33)
40 Splines (1)

Brakes

Disc Brake Upgrade (25)
Reuse Factory (4)

CV / Non - CV

Non - CV (21)
CV (31)

Extended Or Stock Length

Extended (38)
Stock (24)

Front Or Rear

Front (115)

Gear Ratio

4.30 (6)
4.56 (2)
4.88 (10)
5.13 (2)
5.38 (8)
No Gears (6)

Housing Type

07-Up Jeep JK Dana 60 (12)
97-06 Jeep TJ Dana 60 (18)

Required Slip Yoke Eliminator

Included (2)
Does Not Require Slip Yoke Eliminator (29)
Slip Yoke Elimintaor Required (22)

Traction Device

ARB Air Locker (28)
None (6)

Transmission Type

Automatic (7)
Manual (5)

Wheel Bolt Pattern

Part Type

Price Range

$200 to $299 (8)
$300 to $399 (11)
$400 to $499 (5)
$500 to $749 (40)
$750 to $999 (9)
Over $1000 (37)

13 Product Groups

Switch to View Products

SORT BY

Rubicon Express CVO Drive Shafts

From $359.99

Spicer drive shafts and components are as good as they get. Atlas transfer cases and any other 1310 series CV yoke. Measurements are taken center to center on the u-joint with the slip stub at the center of it's travel. measure your vehicle on the ground in the running position to get correct length.
California Residents: WARNING

From $359.99

3.9 3.9 (8)

Rubicon Express CVF Drive Shafts

From $369.99

Spicer drive shafts and components are as good as they get.
Measurements are taken from flange face to center of the rear u-joint with the slip stub at the center of it's travel. measure your vehicle on the ground in the running position to get correct length.
California Residents: WARNING

From $369.99

3.3 3.3 (6)

G2 Axle & Gear Drive Shafts

From $330.00

Heavy-Duty 1 Ton Upgrade
Made from heavy duty D.O.M. Tubing for strength
Includes larger solid-body 1350 Series U-Joints for durability
Dynamically balanced to eliminate vibration
California Residents: WARNING

From $330.00

TeraFlex CRD60 HD Axle Assemblies

From $2,719.99

Tera CRD60 specific high-pinion rear axle housing design
HD bearing caps increase rigidity and reduce ring and pinion distortion
Constant Radius Design (CRD) provides maximum ground clearance regardless of pinion angle
Built-in “skimmer” cuts ring gear oil halo and forces it into the pinion bearings
Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing
Oversized outer pinion bearing handles increased torque and high-load conditions
High-capacity housing holds maximum amount of oil
Asymmetric housing design for extra-long tube side strength
Pre-installed inner axle seals
Ductile cast iron housing with increased rib gussets
HD ductile iron differential cover with increased cover mounting area
Integrated lower control arm skid plates
High-flow oil passages
Bottom oil drain hole for simple fluid changes
Reinforced rear track bar mount with multiple mounting locations
UV protected triple-stage powder coat for corrosion resistance
1/4”-thick CNC laser cut axle brackets for extreme strength
Pre-installed upper control arm bushings
Proper pinion angle for lifted applications
Features a raised pinion angle and raised track bar bracket
Pre-tapped hole on spring perch for bump stop extensions
Pre-drilled holes for limit straps and lower spring retainers
Retains all ESP, ABS, and speedometer sensor capability
100% engineered, designed, and built in the USA with new components

From $2,719.99

J.E. Reel Drive Shafts

From $597.55

1310 Heavy Duty front driveshaft
Stronger than O.E. type applications
J.E. Reel Drivelins are designed to work with 2.5"-4.5" lifts from most manufactures
2"x.120 Tubing
Grade 8 Hardware
1310 U-bolts
1310 U-Joints
California Residents: WARNING

From $597.55

Dana Spicer Drive Shafts

From $740.99

50 percent thicker tubing than factory
Small diameter design for additional exhaust clearance
Bolts to factory differential yoke
Required transfer case flanged yoke not included
California Residents: WARNING

From $740.99

4.3 4.3 (4)

Crown Automotive Drive Shafts

From $330.99

Drive Shaft
California Residents: WARNING

From $330.99

5.0 5.0 (7)

Omix-ADA Drive Shafts

From $485.99

Drive Shaft
California Residents: WARNING

From $485.99

Rugged Ridge Rear Drive Shafts

From $1,099.99

CV drive shafts are specifically made for NP231 slip yoke eliminator kits
California Residents: WARNING

From $1,099.99

Skyjacker Drive Shafts

From $579.87

Reduce or eliminate driveline vibration with a CV-equipped drive shaft.
Constant Velocity (CV) joints use two U-joints (double cardan style) in the place of a single U-joint.
California Residents: WARNING

From $579.87

TeraFlex Dana 60 Axle Assemblies

From $5,548.99

Maximum Ground Clearance
Adjustable Control Arm And Track Bar Mounting Locations
Comes complete with properly matched components
Ultra-reliable package that exceeds stock axle performance, durability and reliability
California Residents: WARNING

From $5,548.99

Tuff Country Drive Shafts

From $574.95

Tuff Country's heavy duty drive-shafts are a upgrade over inferior stock driveshafts and are sometimes necessary after lifting your rig. Eliminate vibration, preserve proper driveline angles and upgrade the durability of your driveshaft with Tuff Country Driveshaft.
California Residents: WARNING

From $574.95

Rough Country Drive Shafts

From $259.95

Includes brute force red seals
Includes better quality CV joints
Shaft strength is twice as strong as the factory equipped driveshaft
Grease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and not all over the bottom of your Jeep

From $259.95

4.0 4.0 (5)