Synergy Manufacturing Control Arm Bushing Outer Sleeve

From $30.00

• Control Arm Bushing Outer Sleeve
• Universal application
• Made of high strength steel
• Welding required
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Cam Bolt Eliminator Kits

From $110.00

• Designed To Take Place Of Cam Bolts Used On Stock Control Arm Mounts
• Desirable For Users Who Are Removing Cam Bolts And Upgrading To Adjustable Control Arms
• Laser Cut 3/16" High Strength Steel
• Zinc Plated For Maximum Corrosion Resistance
• Includes 4 Washers
• California Residents: WARNING

Rock Krawler Remote Reservoir Coil-Over Shocks

From $2,299.00

• 2.625 inch O.D. Fluted Aluminum Shock Body
• Military Grade Hard Anodized Surface
• Cooling Surface Area of a 3.0 Coil Over
• 1.0 inch Nitrotec Shaft
• Billet Aluminum Valve Circuit and Components
• Dual Spring Rate Slider
• Serviceable/Rebuildable/Revalveable
• California Residents: WARNING

Synergy Manufacturing Dodge AAM 9-1/4 Inch Lower C-Gusset Kit

From $35.00

• Laser cut and CNC formed from high strength 3/16 inch steel
• Make in the USA
• California Residents: WARNING

Synergy Manufacturing Bracket Kit

From $200.00

• Easy installation
• 2.0 inch reservoir mounts sold separately
• Extended bracket measures 17 inch from bottom of bracket to center of bolt hole
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Front Air Bump Bracket Kit

From $140.00

Synergy Manufacturing Heavy-Duty Replacement Transmission Cross Member

From $315.00

• 3.6L and 3.8L gas engines with either automatic or manual transmissions
• Laser cut and CNC formed from 3/16 inch crush resistant Grade 50 A-572 steel plate
• Fully boxed construction with internal gusseting provides maximum strength where it counts
• Compatible with stock and most aftermarket skid plates
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Front/Rear Brake Line Kit

From $200.00

• Front and rear DOT approved brake line kit
• Features a special Kevlar liner in addition to the stainless steel braided cover
• They meet the strict guidelines of the U.S. Dept. of Transportation (D.O.T.) MVSS
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing HD E-Coated U-Bolt for 3.50 Inch Axle Tubes

From $25.00

• Axle U-Bolt Kit
• California Residents: WARNING

Synergy Steering Upgrades and Drag Links

From $450.00

• Requires use of Synergy Jeep JK Front Track Bar Bracket (#SYN8055) when flipping the drag link to the top of the knuckle. Requires TRE adapter (#SYN8001-03-01) to flip drag link. Requires a maximum 4-3/4 inch backspace wheel or wheel spacer with factory wheel setup. Can be used in factory position on bottom of steering knuckle Tie Rod and Drag Link both come with Synergy's own HD Metal on Metal Tie Rod Ends, SYN4131-L. Synergy Double Adjuster Sleeve allows adjustment of tie rod length without removing it from the vehicle.
• California Residents: WARNING

Synergy Track Bar Brackets

From $30.00

• Bracket can be trimmed to desired height to adjust the mounting position of the track bar to alighn the track bar and drag link in the same plane.
• California Residents: WARNING

Synergy Ball Joint Dust Boots

From $10.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Steering Stabilizer Clamps

From $25.00

Rock Krawler Control Arm Bushings

From $12.17

Rock Krawler Trail Runner Suspension Systems

From $10,000.00

• Amazing off-road ability
• Excellent highway ride and handling
• Low COG suspension design
• Lower control arms made from 2” OD 7/16” wall DOM
• DIY front upper third link arm made 1.75” .120 wall DOM steel tubing with weld-in bungs
• Independent three link front end
• Rear triangulated 4 link
• 1/4 inch thick steel skid plate and long arm mounting brackets:Weld on rear cradle
• 2" front stretch with 6" rear stretch
• 37"/38" tall tires with flat fenders
• Up to 40" tall tires with high line kits

Rock Krawler Flex Series Suspension Systems

From $1,629.65

• Complete bolt-in system
• Smooth highway ride and handling
• Weekend off-road warrior
• Great Off-Road Ability
• Multiple Lift Kits for Jeeps available
• Sold with or without shocks

Rock Krawler Stock Mod Series Suspension Systems

From $1,580.09

• Complete bolt-in system
• Smooth highway ride and handling
• Great Off-Road Ability
• Multiple Lift Kits for Jeeps available
• Sold with or without shocks

Rock Krawler Suspension Upgrade Kits

From $531.51

• Complete bolt-in system
• Excellent highway ride
• Improved off-road ability
• Bolt-in triangulated 4 link rear
• Eliminates front and rear track bar "cross talk"
• Greatly improved rear pinion cycle with equal length rear upper and lower arms
• Rear axle remains perfectly centered
• Allows for rear pinion adjustment
• Lifetime warranty on all hard parts

Rock Krawler Starter Lift Systems

From $482.97

Synergy Manufacturing Wheel Spacer Studs

From $5.00

• Designed specifically to fit Synergy Wheel Spacers
• Sold individually