TeraFlex CRD60 HD Axle Assemblies

From $2,620.99

• Tera CRD60 specific high-pinion rear axle housing design
• HD bearing caps increase rigidity and reduce ring and pinion distortion
• Constant Radius Design (CRD) provides maximum ground clearance regardless of pinion angle
• Built-in “skimmer” cuts ring gear oil halo and forces it into the pinion bearings
• Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing
• Oversized outer pinion bearing handles increased torque and high-load conditions
• High-capacity housing holds maximum amount of oil
• Asymmetric housing design for extra-long tube side strength
• Pre-installed inner axle seals
• Ductile cast iron housing with increased rib gussets
• HD ductile iron differential cover with increased cover mounting area
• Integrated lower control arm skid plates
• High-flow oil passages
• Bottom oil drain hole for simple fluid changes
• Reinforced rear track bar mount with multiple mounting locations
• UV protected triple-stage powder coat for corrosion resistance
• 1/4”-thick CNC laser cut axle brackets for extreme strength
• Pre-installed upper control arm bushings
• Proper pinion angle for lifted applications
• Features a raised pinion angle and raised track bar bracket
• Pre-tapped hole on spring perch for bump stop extensions
• Pre-drilled holes for limit straps and lower spring retainers
• Retains all ESP, ABS, and speedometer sensor capability
• 100% engineered, designed, and built in the USA with new components

TeraFlex NP231 Extreme Short Shaft Kit

From $9.99

• Extreme Short Shaft Kit
• With 231 transfer case
• Eliminates slip yoke
• Requires a longer CV style drive shaft
• California Residents: WARNING

TeraFlex Sway Bar Links

From $16.99

• Sway Bar Links
• Teraflex Front Links when connected provides immediate reaction during sway bar loading to eliminate excess play
• Rear Links are designed to reduce clearance issues between the tire and rear sway bar
• Available for different lift heights and fixed or quick disconnect styles
• California Residents: WARNING

TeraFlex Short Shaft SYE

From $11.99

• Eliminates slip yoke and need for transfer case drop
• Withstands 50% more torque
• Increases rear drive shaft length by 4 inch
• Requires use of CV style rear drive shaft
• California Residents: WARNING

TeraFlex Disc Brake Kit

From $7.99

• Disc Brake Kit
• Bolt-on upgrade to replace factory Jeep drum brakes
• Dana 35 c-clip, Dana 44 and Chrysler 8.25
• Kits Includes Rotors
• Backing Plates with Integrated Park Brake
• Calipers
• Brake Pads
• Hardware
• California Residents: WARNING

TeraFlex Recovery Equipment

From $35.99

• Recovery gear
• California Residents: WARNING

TeraFlex Heavy-Duty Tie Rod

From $215.99

• Tie Rod
• Heavy-Duty
• 1-1/2 inch hexagon 6061 T6 aluminum
• For use with Dana 30 high steer knuckle
• Small taper
• California Residents: WARNING

TeraFlex Rear Disc Brake Conversion

From $7.99

• Rear Disc Brake Conversion
• Non C-clip and D-44 rear axles
• Improves stopping power
• Bolt-on installation
• Kit includes everything needed to convert to disc brakes
• California Residents: WARNING

TeraFlex Replacement Track Bar Bushing

From $21.99

• The TeraFlex TJ track bar bushing uses OE style rubber bushings with an additional rate plate for superior handling and responsive control
• Designed to reduce the effects of front wheel shimmy
• Improve durability and tunability
• Must be pressed in
• California Residents: WARNING

TeraFlex Revolver Crush Cushion

From $7.99

• Replace your worn Revolver Shackle components, and restore complete functionality
• The UHMW nylon cushion keeps the Revolver shackle properly positioned when folded in the closed/resting position
• Sold Individually
• California Residents: WARNING

TeraFlex Trail S/T Rear Sway Bar System

From $689.99

TeraFlex Sway Bar Bushing Kit

From $24.99

• This TeraFlex Bushing Ball Replacement Kit is designed to serve as direct replacements for the TeraFlex brand quick disconnect swaybar link bushings
• The polyurethane bushings are specifically designed for easy replacing
• California Residents: WARNING

Weather Guard Saddle Tool Boxes

From $1,007.99

• Tamper-resistant, retracting EXTREME PROTECTION Lock on the saddle tool box for trucks helps protect against break-ins
• 90 degree cover opening for easy access
• Automotive-style rotary latch on the saddle box features smooth one-touch opening
• Full weather seal on the truck tool box protects against the elements
• Convenient attachment points secures materials and tools in pickup bed
• ARMOR TUF finish ensures years of dependability
• Limited lifetime warranty ensures unparalleled quality

TeraFlex Base Lift Kits

From $1,049.99

• Depending On Lift Height And Vehicle Model Kits Typically Include:
• Dropped Pitman Arm
• Front Sway Bar Disconnects
• Rear Sway Bar Links
• Rear Track Bar Bracket
• Bump Stops
• Brake Line Extension Brackets
• All Necessary Hardware
• California Residents: WARNING

Weather Guard All-Purpose Truck Tool Chests

From $1,075.99

• The back of the truck chest tool box can be placed tight against the front of the pickup bed because zero clearance is needed for opening the cover
• The angled body design on the truck bed storage box is ideal for use with fifth wheel and goose neck trailer applications
• 90 degree cover opening for easy access
• Automotive-style rotary latch mechanism keeps the cover tight against the weather seal
• Full weather seal on the truck tool box protects against the elements
• 12 volt access for electrical up-fits

Weather Guard Gull Wing Tool Boxes

From $1,182.99

• Tamper-resistant, retracting EXTREME PROTECTION Lock on gull wing truck tool box helps protect against break-ins
• Twin, gull-wing type covers operate independently to provide easy access from either side of truck
• The truck tool box suspends from the side of a pickup truck allowing plenty of room underneath
• Automotive-style rotary latch features smooth one-touch opening from either side of the truck
• Full weather seal on the truck tool box protects against the elements
• 12 volt access for electrical up-fits
• Truck bed tool box includes powder coated steel divider tray and two keys

Weather Guard Wheel Well Truck Tool Boxes

From $766.99

• Pickup truck tool box can be used with some truck bed caps due to the low profile design
• Tamper-resistant, retracting EXTREME PROTECTION Lock on the wheel well truck box helps protect against break-ins Includes two keys
• 90 degree cover opening for easy access
• Full weather seal on the truck tool box protects against the elements

Weather Guard Protect-A-Rail Cab Protectors

From $236.99

• Headache rack designed to protect the cab of the pickup from shifting loads in the cargo area
• Installation requires separate purchase of cab protector mounting kit custom fit for your vehicle
• Steel frame and 14-gauge louvers
• Limited lifetime warranty ensures unparalleled quality

Weather Guard Cab Protector Mounting Kits

From $100.00

Weather Guard Tool Box Accessories

From $140.99

• Part cabinet trays
• Divider trays
• Tool box lighting

Weather Guard Defender Series Truck Tool Boxes

From $277.27

• Delivers Heavy-Duty Security with two Hook Loop Strikers and Dual Stage Rotary Latches
• Provides Professional Durability with four-piece Welded Construction putting strength where it is needed most
• Classic Weather Resistance from full weather seal with D-shaped ribbed weather stripping
• Tamper-resistant Push Button Locks - drill resistant through key hole
• Heavy-Duty pry resistance with C-channel reinforced welded lid construction and reinforced front body panel
• Dual Gas Strut supported lid with Protective Sleeves
• Includes sliding small parts tray
• California Residents: WARNING

Weather Guard Ratchet Straps

From $132.99

• Installation requires product to be drilled into truck rack and is permanently installed to the rack
• Quick release button retracts the straps automatically for easy stowing when not in use
• Straps rated to 1,000 lbs
• Includes a set of 2 ratchet straps, mounting bracket, and mounting hardware

Weather Guard Truck Racks

From $140.99

• Adjustable front legs allow this steel truck rack to offer a universal fit for full-sized truck beds
• The truck rack has a load capacity of 1,000 lbs., evenly distributed
• Includes a welded airfoil to help reduce drag
• True no-drill installation by using the stake pockets and high-strength mounting clamps
• Tie-down loops on each leg provide convenient points for securing loads
• Protective tape included for wrapping areas that could damage ladders and other equipment
• The rear of the truck rack has handle bars to make it easier to get on and off the truck
• Removable pins on the rear cross member allow you to quickly take off the rear cross member for loading large materials
• An additional four tie down points on the side members of the rack allow for more secure points of tying down materia

TeraFlex Sport ST2 Suspension Systems

From $1,201.99

• Delivers True Street & Trail (S/T) Performance
• Install & Drive Simple Bolt-On Installation
• Dependable Performance With Zero Worries
• Positive, Responsive Handling
• Reduced Vibration & Harshness
• Preset Front Lower Sport Flexarms Optimize Correct Caster & Pinion Angles
• High Quality, Factory Style Bushings Provide Excellent Vibration Damping & Ride Quality With Zero Maintenance
• Speedbump Progressive Bump Stops
• No Alignment Or Adjustment Required
• Teraflex Lifetime Warranty
• Fits Up To 35” Tires
• California Residents: WARNING