Synergy Manufacturing 2.0 Inch Air Bump Cans

From $60.00

• Air Bump Mounting Can
• Fits Bilstein, Fox, and SAW 2.0 Air Bumps
• 1026 DOM tubing
• California Residents: WARNING

Synergy Manufacturing Adjustable Steering Column

From $15.00

• Allows for easy adjustment of steering column
• Laser cut from 3/16 inch steel
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Heavy Duty Metal-on-Metal Tie Rod End

From $60.00

• Fully greasable sintered metal on metal bushing design
• Tie Rod end boot is made from silicone and polyurethane
• 7/8-18 UNF LH Thread
• Spring loaded bearing design keeps pressure on bearings
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Control Arm Mounts

From $125.00

• Synergy Manufacturing Weld-On HD Front Lower Control Arm Mounts heavy duty 3 sided construction and laser cut/CNC bent from 3/16" high strength steel to provide maximum rigidity
• Brackets comes with additional mounting holes so that the control arms can be mounted 1" higher than stock for additional clearance
• Synergy Manufacturing Weld-On HD Front Lower Control Arm Mounts hole size is 9/16" and a mounting width of 2-5/8
• California Residents: WARNING

Synergy Manufacturing Limit Straps

From $25.00

• Limit Straps
• 8" up to 20" inch Lengths Hole to Hole
• Plated end fittings are made from tough 4130 steel and have 1/2" hole
• U.S. made 1.75" nylon webbing with a 7000 lb. rating and superior flexibility
• Quad wrap (ultra strength)
• Eyelets have an integrated deflector clip to minimize abrasion
• Sold individually
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Radius Axle Link Brackets

From $1,000.00

• Synergy Manufacturing Radius Axle Link Brackets are designed to be used on an axle housing with a 3" diameter
• The link brackets are laser cut and CNC bent from 1/4" carbon steel
• The heavy duty 3 sided construction provides for a VERY rigid bracket and is designed to be used with any of our large rod ends with our high misalignment spacers & all of our rebuildable spherical bearing assemblies
• California Residents: WARNING

Superwinch S Series Winches

From $606.99

• Superwinch S Series winches are powerful series wound motors ranging from 1.1 to 2.0 hp
• All steel differential planetary gear sets with gear ratios as high as 253:1
• Providing durable and reliable power up to 9000Lbs for all your needs
• The electric winch is backed up by power IN and OUT, freespooling drum, mechanical and dynamic braking, and roller fairlead
• California Residents: WARNING

Synergy Manufacturing Front Long Arm Lower Control Arm

From $575.00

Synergy Manufacturing Rear Coil Wedges

From $30.00

• Polyurethane Rear Coil Wedges
• Keeps rear springs from bowing irregularly when suspension lifts are used
• Fixes the common problem of the rear springs rubbing the rear trackbar/trackbar bracket when aftermarket CV driveshafts are used
• Corrects the rear axle mount spring perch angle when aftermarket CV driveshafts are used
• Sold As A Pair
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Rear Stretch Bracket Kit

From $1,480.00

• Synergy Manufacturing Rear Stretch Bracket Kit allows 2 Door JK's to be stretched with the Synergy 8 inch stretch kit while retaining the factory style coil spring and shock setup
• The Rear Stretch Bracket Kit Relocates upper coil spring mounts and upper shock mounts back 8 inches
• The Synergy Manufacturing Rear Stretch Bracket Kit is designed to be used in conjunction with Synergy 8032 rear 8 inch stretch brackets and long arms
• California Residents: WARNING

Synergy Manufacturing Front Sway Bar Links

From $115.00

• Sway Bar Links
• Front
• 100% bolt on components
• Made from 11/16" solid 1018 steel and are clear zinc plated for maximum corrosion resistance
• Will Sold as a pair
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Extended Brake Line Kit

From $100.00

• DOT approved brake line kit
• For JKs with up to 4.5 inch of lift
• Measures 25.07 inch in overall length
• Features a special Kevlar liner in addition to the stainless steel braided cover
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Weld-On Rear Track Bar Brackets

From $100.00

• Weld-On rear track-bar bracket designed to replace the weak factory track bar bracket
• Replace the thin factory brackets on a stock axle or use for swapping any axle
• Multiple Track-bar holes for suspension adjustments
• This bracket requires the use of a minimum 3" rear bump stop spacer for clearance with the exhaust
• California Residents: WARNING

Synergy Manufacturing FOX/Synergy Steering Stabilizer Relocation Kit

From $300.00

• Manufactured from high strength 3/16 inch steel
• Grade 8 Hardware
• Powdercoated for corrosion resistance
• Bolt on components
• Fits Right Hand Drive Only
• Made in the U.S.A
• California Residents: WARNING

Synergy Lift Coil Springs

From $260.00

• Lift coil springs
• Synergy coils offer excellent off road performance while preserving ride quality
• Progressively wound
• keeps spring from coming unbound at suspension droop
• Progressively wound spring eliminates annoying spring clanking found on most suspension kits
• Feature frequency balanced and tuned spring rates to maximize suspension performance on and off road
• Suspension components feature an abrasive-resistant black powder coat finish for maximum durability and corrosion resistance
• Springs are designed to give the advertised amount of lift with use of aftermarket front bumpers & winches
• Sold in a pair
• California Residents: WARNING

Synergy Manufacturing Axle Trusses

From $200.00

• Open top for easy upper link installation
• Rigid, boxed design made from 3/16" laser cut steel plate
• Designed to be used for 4 link suspensions
• Fits most differentials, D35, 44, 60, Ford 8.8", 9.0" & Chevy 14 bolt housings
• Link mount brackets are angled at 50 degrees apart from each other
• California Residents: WARNING

Synergy Manufacturing Control Arm Cam Bolt Kit

From $45.00

• Synergy 9/16" Control Arm Cam Bolt Kit
• Cam bolts are manufactured from high carbon heat treated steel
• All included components are zinc plated for maximum corrosion resistance
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Cam bolt offers 1/2" adjustment in either direction
• The bolt will work on a mounting width of 2.25 - 3"
• California Residents: WARNING

Synergy Manufacturing Side Plate Mounting Kit (Arms Only)

From $75.00

• (2) Side Plate Mounting Arms only
• Jeep JK, 4 Door
• Made in the USA
• California Residents: WARNING

Synergy Tie Rod Ends

From $60.00

• Outperforms the factory and all other aftermarket style tie rod ends by offering a larger shank with no stress riser (doesnt neck down at base) and elimination of the nylon ball race.
• California Residents: WARNING

Superwinch Pulley Block

From $32.99

• Hook is easily removed
• California Residents: WARNING

Synergy Manufacturing Rear Track Bar Brackets

From $100.00

• Bracket raises the vehicle's axle side track bar mount
• The vehicle's rollcenter is raised, reducing body roll and dramatically improving overall handling
• Special bolt on design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• Suspension components feature an abrasive resistant powder coat finish for maximum durability and corrosion resistance
• California Residents: WARNING

Superwinch Terra 25 Series Winches

From $259.99

• Premium performance - Bargain price!
• Power, reliability and durability - that's what the Superwinch Terra is all about
• Built in 3 capacities (2,500, 3,500 and 4,500)
• Choose either synthetic rope or steel cable
• There's a Terra winch that's right for you
• 2X bigger gears
• Reinforced drums
• Clockable for best fit
• Better motors
• California Residents: WARNING

Synergy Manufacturing Axle Bracket Kit

From $175.00

• Front and Rear applications
• Various mounts included
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Double Adjuster Tube Adapter

From $55.00

• Made from solid stock 1018 Steel
• Adapters Include: (1) Weld on Tube Adapter with Pinch Bolt Slit and Tubes, (1) Zinc Plated Double Adjuster Sleeve to be used with a Thread Shank Rod End, and (1) Pinch Bolt Hardware
• Welding required
• Made in the U.S.A
• California Residents: WARNING