Synergy Manufacturing Bushings

From $125.00

• Bushing halves
• Bushing Kits
• Bushing Sleeves
• California Residents: WARNING

Synergy Manufacturing Front Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of front axle when running a suspension lift
• Features an abrasive resistant Powdercoat finish for maximum durability and corrosion resistance
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Front Sway Bar Quick Disconnect Kit

From $250.00

Synergy Manufacturing Front Sway Bar Relocation Kit

From $75.00

• Sway Bar Relocation Kit
• Front
• 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
• Sway bar relocation brackets move the existing mounting location up 1.75"
• Abrasion resistant powder coat finish for maximum durability and corrosion resistance
• Kit includes (2) Front Sway Bar Relocation Brackets and all necessary mounting hardware
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Sway Bar End Link Bushings

From $10.00

• End Link Bushings
• For Sway Bar
• High quality rubber bushing, designed to use a separate internal sleeve
• 1.50" mounting width
• Replacement for 8059 / 8063
• California Residents: WARNING

Synergy Manufacturing Cam Bolt Eliminator Kits

From $110.00

• Designed To Take Place Of Cam Bolts Used On Stock Control Arm Mounts
• Desirable For Users Who Are Removing Cam Bolts And Upgrading To Adjustable Control Arms
• Laser Cut 3/16" High Strength Steel
• Zinc Plated For Maximum Corrosion Resistance
• Includes 4 Washers
• California Residents: WARNING

Synergy Manufacturing Rear Long Arm Upper Control Arms

From $450.00

Synergy Manufacturing Bracket Kit

From $200.00

• Easy installation
• 2.0 inch reservoir mounts sold separately
• Extended bracket measures 17 inch from bottom of bracket to center of bolt hole
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Sealed Sway Bar Link Tie Rod End

From $20.00

• Sway Bar Link Tie Rod End
• Sealed
• Clear Zinc Plated for maximum corrosion resistance
• 1/2-20 UNF thread
• Made from forged 1040 steel, not cast
• Replacement for 8059 / 8060 / 8518
• California Residents: WARNING

Synergy Manufacturing Heavy Duty Weld-On Front Track Bar Brackets

From $175.00

• Weld on design for strength and reliability
• Bracket raises the vehicles suspension roll center
• Bracket moves track bar closer to the axle centerline to clear aftermarket highsteer knuckles/tie rod at full steering lock
• Raising the roll center reduces vehicle body roll and dramatically improves overall handling
• Weld on tab included for mounting factory or aftermarket steering stabilizer up and out of harms way
• Laser cut from 3/16" steel
• California Residents: WARNING

Synergy Manufacturing Rear Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of rear axle when running a suspension lift
• 100% bolt on
• Rear track bar relocation bracket for lifts taller than 4.5 inch
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Limit Straps

From $25.00

• Limit Straps
• 8" up to 20" inch Lengths Hole to Hole
• Plated end fittings are made from tough 4130 steel and have 1/2" hole
• U.S. made 1.75" nylon webbing with a 7000 lb. rating and superior flexibility
• Quad wrap (ultra strength)
• Eyelets have an integrated deflector clip to minimize abrasion
• Sold individually
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Heavy Duty Fixed Front Lower Control Arms

From $315.00

Synergy Manufacturing Bolt-on Rear Track Bar Brackets

From $220.00

• This bracket raises the vehicles axle side track bar mount
• The vehicles rollcenter is raised, reducing body roll and dramatically improving overall handling
• Special bolton design strengthens the factory mount that is prone to failure
• Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
• California Residents: WARNING

Synergy Manufacturing HD Front Lower Coil Spring Mounts

From $150.00

• Synergy Manufacturing HD Front Lower Coil Spring Mounts are designed to replace stock Jeep JK front lower coil mounts that are prone to failure
• The HD Front Lower Coil Spring Mounts are laser cut and cnc bent from 3/16 inch steel and have a 3/8-16 threaded integrated bump stop pad
• The Synergy Manufacturing HD Front Lower Coil Spring Mounts have a weld on design and are perfect for users who are re-tubing or building a custom axle with coil springs
• California Residents: WARNING

Synergy Manufacturing 2 - 3 Inch Bolt-on Rear Track Bar Brackets

From $250.00

• Synergy Manufacturing 2 - 3 Inch Bolt-on Rear Track Bar Brackets are heavy duty rear track bar brackets for the Jeep JK
• The bracket raises the vehicle's axle side track bar mount by 3.0 inches
• The Synergy Manufacturing 2 - 3 Inch Bolt-on Rear Track Bar Brackets is laser cut from 3/16" steel with a 2 stage powdercoat finish for maximum strength and durability
• California Residents: WARNING

Synergy Sway Bar Relocation Bracket

From $65.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Control Arm Kit with Adjustable Lower Control Arms

From $1,110.00

Synergy Manufacturing High Clearance Front Lower Control Long Arms

From $630.00

Synergy Manufacturing Rear Lift Shackles

From $325.00

• Replacement shackle that provides 1 inch additional rear lift
• Helps regain slight factory rake on leveled trucks which aides in towing and carrying heavy loads
• Features a grease zerk for service and longevity
• Manufactured from high strength 3/16 inch steel and Powdercoated for corrosion resistance
• Make in the USA
• California Residents: WARNING

Synergy Manufacturing Sway Bar Disconnect Mount Hardware

From $125.00

Synergy Manufacturing Budget Bump Stop

From $125.00

Synergy Manufacturing Rear Axle Spring Pad

From $115.00

• Designed to fit stock JK rear housings (3-1/8 inch axle diameter)
• Sold as a pair
• Made in the USA
• California Residents: WARNING

Synergy Manufacturing Control Arm Bushing Outer Sleeve

From $30.00

• Control Arm Bushing Outer Sleeve
• Universal application
• Made of high strength steel
• Welding required
• Made in the USA
• California Residents: WARNING