Synergy Manufacturing Steering Stabilizer Relocation Kit

From $105.00

• Designed to relocate the factory stabilizer up and out of harms way
• The kit includes grade 8 hardware and is easily installed using basic hand tools
• Manufactured from high strength 3/16 inch steel
• Powdercoated for corrosion resistance
• Requires 2 inch bump stop spacers
• Note: 2011 and newer Jeeps will require the use of the 8003 Tie Rod Clamp
• Made in the U.S.A
• California Residents: WARNING

TeraFlex Transfer Case Lowering Kit

From $39.99

• The TeraFlex transfer case lowering kit lowers the transfer case to reduce driveshaft vibration caused by increased ride height
• This is especially useful for Jeeps that have not installed a slipe yoke eliminator kit
• California Residents: WARNING

TeraFlex Hats

From $31.99

• Many sizes and colors to choose from
• California Residents: WARNING

TeraFlex FlexArm

From $216.99

• FlexArm can be added to any existing suspension lift
• FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length
• California Residents: WARNING

Synergy Manufacturing Control Arm Bushing Outer Sleeve

From $30.00

• Control Arm Bushing Outer Sleeve
• Universal application
• Made of high strength steel
• Welding required
• Made in the USA
• California Residents: WARNING

TeraFlex Revolver Crush Cushion

From $7.99

• Replace your worn Revolver Shackle components, and restore complete functionality
• The UHMW nylon cushion keeps the Revolver shackle properly positioned when folded in the closed/resting position
• Sold Individually
• California Residents: WARNING

Synergy Manufacturing Cam Bolt Eliminator Kits

From $110.00

• Designed To Take Place Of Cam Bolts Used On Stock Control Arm Mounts
• Desirable For Users Who Are Removing Cam Bolts And Upgrading To Adjustable Control Arms
• Laser Cut 3/16" High Strength Steel
• Zinc Plated For Maximum Corrosion Resistance
• Includes 4 Washers
• California Residents: WARNING

Teraflex Full Float Conversion Kits

From $1,383.97

• Universal for axles with 35 splines
• Includes cap
• California Residents: WARNING

TeraFlex FlexArm Tube

From $186.99

• TeraFlex offers standard lengths of FlexArm tubing pre-tapped for our large Monster ends
• These can be used for custom suspension links or torque arms
• Tube length is measured as the actual length of tube
• California Residents: WARNING

TeraFlex FlexArm Mount

From $117.99

• Weld on Brackets for FlexArm control arms
• California Residents: WARNING

Synergy Manufacturing Dodge AAM 9-1/4 Inch Lower C-Gusset Kit

From $35.00

• Laser cut and CNC formed from high strength 3/16 inch steel
• Make in the USA
• California Residents: WARNING

Synergy Manufacturing Bracket Kit

From $200.00

• Easy installation
• 2.0 inch reservoir mounts sold separately
• Extended bracket measures 17 inch from bottom of bracket to center of bolt hole
• Made in the USA
• California Residents: WARNING

TeraFlex Dana 60 Axle Assemblies

From $3,582.99

• Maximum Ground Clearance
• Adjustable Control Arm And Track Bar Mounting Locations
• Comes complete with properly matched components
• Ultra-reliable package that exceeds stock axle performance, durability and reliability
• California Residents: WARNING

Synergy Manufacturing Front Air Bump Bracket Kit

From $140.00

Synergy Manufacturing Heavy-Duty Replacement Transmission Cross Member

From $315.00

• 3.6L and 3.8L gas engines with either automatic or manual transmissions
• Laser cut and CNC formed from 3/16 inch crush resistant Grade 50 A-572 steel plate
• Fully boxed construction with internal gusseting provides maximum strength where it counts
• Compatible with stock and most aftermarket skid plates
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Control Arm Kit with Fixed Length Lower Control Arms

From $1,520.00

Synergy Manufacturing Front/Rear Brake Line Kit

From $200.00

• Front and rear DOT approved brake line kit
• Features a special Kevlar liner in addition to the stainless steel braided cover
• They meet the strict guidelines of the U.S. Dept. of Transportation (D.O.T.) MVSS
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing HD E-Coated U-Bolt for 3.50 Inch Axle Tubes

From $25.00

• Axle U-Bolt Kit
• California Residents: WARNING

Synergy Steering Upgrades and Drag Links

From $450.00

• Requires use of Synergy Jeep JK Front Track Bar Bracket (#SYN8055) when flipping the drag link to the top of the knuckle. Requires TRE adapter (#SYN8001-03-01) to flip drag link. Requires a maximum 4-3/4 inch backspace wheel or wheel spacer with factory wheel setup. Can be used in factory position on bottom of steering knuckle Tie Rod and Drag Link both come with Synergy's own HD Metal on Metal Tie Rod Ends, SYN4131-L. Synergy Double Adjuster Sleeve allows adjustment of tie rod length without removing it from the vehicle.
• California Residents: WARNING

Synergy Track Bar Brackets

From $30.00

• Bracket can be trimmed to desired height to adjust the mounting position of the track bar to alighn the track bar and drag link in the same plane.
• California Residents: WARNING

Synergy Ball Joint Dust Boots

From $10.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

TeraFlex Trail S/T Rear Sway Bar System

From $689.99

TeraFlex Steering Stabilizer Relocation Kits

From $84.99

• Moves stabilizer up nearly 2.5
• California Residents: WARNING

TeraFlex Sway Bar Bushing Kit

From $16.99

• This TeraFlex Bushing Ball Replacement Kit is designed to serve as direct replacements for the TeraFlex brand quick disconnect swaybar link bushings
• The polyurethane bushings are specifically designed for easy replacing
• California Residents: WARNING