Synergy Manufacturing Rear Track Bars

From $225.00

• Bent to clear most aftermarket differential covers
• Retains factory track bar mounting bolts and hardware
• Made from high quality 1-1/4 inch 1018 CR Solid Round Barstock
• Allows centering of rear axle when running a suspension lift
• 100% bolt on
• Rear track bar relocation bracket for lifts taller than 4.5 inch
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Shock Mounts

From $100.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Synergy Manufacturing Steering Box Brace

From $10.00

• Steering Box Brace
• Laser cut
• CNC bent
• precision welded
• 1/4" Steel
• Black powder coat finish for maximum corrosion resistance
• 100% Bolt-on installation
• No cutting or drilling required
• Make in the USA
• Note: When using an upgraded 09+ Steering Box, 8559-04 is the steering box brace needed, BUT, modifications will need to be made to the upgraded steering box mounts for proper fitment of the brace.
• California Residents: WARNING

Synergy Manufacturing Adjustable Front Lower Control Arms

From $500.00

Synergy Manufacturing Jeep JK Stabilizer Relocation Kit

From $60.00

• Designed to relocate a Fox/Synergy Suspension steering stabilizer up and out of harms way on a JK
• Includes grade 8 hardware
• Manufactured from high strength 3/16 inch steel
• Powdercoated for corrosion resistance
• Factory clamp cannot be flipped, it will interfere with the diff cover
• Made in the U.S.A
• California Residents: WARNING

Tuff Country Axle Lift Blocks Kit

From $100.95

• Tuff Country?s block kits are an economical solution to raising the rear end of many trucks and SUVs.
• California Residents: WARNING

Synergy Manufacturing Air Compressor Brackets

From $60.00

• Synergy Manufacturing Air Compressor Brackets easily bolt on mount to supply a spot to mount an onboard air compressor under the hood of your JK
• Works with VIAIR 100, 400, & 450 series compressors
• California Residents: WARNING

Tuff Country Upper Control Arms

From $319.95

• Tuff Country EZ-Ride Suspension?s standard upper control arms will provide additional suspension travel
• Helps to restore proper front end geometry & alignment on lifted vehicles
• Polyurethane bushings
• California Residents: WARNING

Synergy Manufacturing 2.0 Inch Air Bump Cans

From $60.00

• Air Bump Mounting Can
• Fits Bilstein, Fox, and SAW 2.0 Air Bumps
• 1026 DOM tubing
• California Residents: WARNING

Synergy Manufacturing Adjustable Steering Column

From $15.00

• Allows for easy adjustment of steering column
• Laser cut from 3/16 inch steel
• Made in the USA
• California Residents: WARNING

Tuff Country Control Arm Bushings

From $12.95

• Tuff Country Control Arm Bushings
• California Residents: WARNING

Tuff Country Torsion Key Leveling Kits

From $100.32

• Tuff Country's Leveling Kits level the front of your truck or SUV with the rear, allowing for slightly larger tires and eliminating the nose-down, factory rake. Tuff Country EZ-Ride Suspension was one of the original manufacturers of suspension leveling kits for trucks and SUV's and all Tuff Country Leveling kits are made of the highest quality materials. Engineered to maintain a factory or near-factory ride quality on all vehicles.
• California Residents: WARNING

Synergy Manufacturing Heavy Duty Metal-on-Metal Tie Rod End

From $60.00

• Fully greasable sintered metal on metal bushing design
• Tie Rod end boot is made from silicone and polyurethane
• 7/8-18 UNF LH Thread
• Spring loaded bearing design keeps pressure on bearings
• Made in the U.S.A
• California Residents: WARNING

Synergy Manufacturing Control Arm Mounts

From $125.00

• Synergy Manufacturing Weld-On HD Front Lower Control Arm Mounts heavy duty 3 sided construction and laser cut/CNC bent from 3/16" high strength steel to provide maximum rigidity
• Brackets comes with additional mounting holes so that the control arms can be mounted 1" higher than stock for additional clearance
• Synergy Manufacturing Weld-On HD Front Lower Control Arm Mounts hole size is 9/16" and a mounting width of 2-5/8
• California Residents: WARNING

Synergy Manufacturing Limit Straps

From $25.00

• Limit Straps
• 8" up to 20" inch Lengths Hole to Hole
• Plated end fittings are made from tough 4130 steel and have 1/2" hole
• U.S. made 1.75" nylon webbing with a 7000 lb. rating and superior flexibility
• Quad wrap (ultra strength)
• Eyelets have an integrated deflector clip to minimize abrasion
• Sold individually
• Made in the USA
• California Residents: WARNING

Tuff Country Sway Bar End Link Kits

From $153.95

• This easy to install suspension upgrade uses heim joints to reduce suspension binding and improve articulation The threaded body allows for fitment on stock height vehicles up to 3? of lift (will fit all Tuff Country lift kits from 2? to 6?).
• California Residents: WARNING

Tuff Country Stainless Steel Braided Brake Hose

From $108.95

• Tuff Country brake lines feature a PTFE inner bladder shielded by a braided stainless steel exterior. This design helps to prevent dry rot. Tuff Country brake hoses are DOT-approved and are available for a variety of applications.
• California Residents: WARNING

Synergy Manufacturing Radius Axle Link Brackets

From $1,000.00

• Synergy Manufacturing Radius Axle Link Brackets are designed to be used on an axle housing with a 3" diameter
• The link brackets are laser cut and CNC bent from 1/4" carbon steel
• The heavy duty 3 sided construction provides for a VERY rigid bracket and is designed to be used with any of our large rod ends with our high misalignment spacers & all of our rebuildable spherical bearing assemblies
• California Residents: WARNING

Synergy Manufacturing Rear Coil Wedges

From $30.00

• Polyurethane Rear Coil Wedges
• Keeps rear springs from bowing irregularly when suspension lifts are used
• Fixes the common problem of the rear springs rubbing the rear trackbar/trackbar bracket when aftermarket CV driveshafts are used
• Corrects the rear axle mount spring perch angle when aftermarket CV driveshafts are used
• Sold As A Pair
• Made in the U.S.A
• California Residents: WARNING

Tuff Country Axle U-Bolt

From $110.95

• Zinc plated u-bolts
• California Residents: WARNING

Synergy Manufacturing Rear Stretch Bracket Kit

From $1,480.00

• Synergy Manufacturing Rear Stretch Bracket Kit allows 2 Door JK's to be stretched with the Synergy 8 inch stretch kit while retaining the factory style coil spring and shock setup
• The Rear Stretch Bracket Kit Relocates upper coil spring mounts and upper shock mounts back 8 inches
• The Synergy Manufacturing Rear Stretch Bracket Kit is designed to be used in conjunction with Synergy 8032 rear 8 inch stretch brackets and long arms
• California Residents: WARNING

Synergy Manufacturing Front Sway Bar Links

From $115.00

• Sway Bar Links
• Front
• 100% bolt on components
• Made from 11/16" solid 1018 steel and are clear zinc plated for maximum corrosion resistance
• Will Sold as a pair
• Made in the USA
• California Residents: WARNING

Tuff Country Single Steering Stabilizers

From $100.95

• Tuff Country's EZ-Ride SX5000 Steering Stabilizers are designed to improve handling characteristics, reduce wheel hop and steering shimmy often experienced after adding larger wheels and tires. Tuff Country recommends their single stabilizers for a maximum tire size of 33 inches. For larger tire sizes see their large selection of dual stabilizers.
• California Residents: WARNING

Synergy Manufacturing Extended Brake Line Kit

From $100.00

• DOT approved brake line kit
• For JKs with up to 4.5 inch of lift
• Measures 25.07 inch in overall length
• Features a special Kevlar liner in addition to the stainless steel braided cover
• Made in the U.S.A
• California Residents: WARNING