G2 Axle & Gear Replacement Axle Kits

From $156.74

• Axle upgrade engineered to withstand the additional load of high-torque applications
• Stronger than factory
• Comes with full manufacturer warranty
• California Residents: WARNING

G2 Axle & Gear Master Ring and Pinion Installation Kits

From $121.50

• G2 ring and pinion installation kit
• Includes Timken bearings, ring gear bolts, shims to set pinion and carrier bearing preloads, pinion seal and pinion nut
• California Residents: WARNING

ARB Air Locking Differentials

From $1,091.00

G2 Axle & Gear Dana 44 JK Ring and Pinion Sets

From $108.00

• Dana 44 JK Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear Ring and Pinion Sets

From $118.00

• Engineered and manufactured to handle increased load
• Forged from high-strength 8620 Steel
• Precision-machined to OE specifications for perfect mesh
• Tight tolerances ensure easy set up and quiet OE-like operation
• Double-lapped and shot-peened for improved longevity
• Heat-treated for added durability
• Wide application range from
• Full 10-year warranty
• California Residents: WARNING

Poison Spyder Bombshell Differential Covers

From $114.99

• Constructed from thick nodular iron
• Available in either bare steel or black powdercoat finish
• One of the thickest differential covers on the market
• California Residents: WARNING

G2 Axle & Gear Hammer Differential Covers

From $159.99

• G2 aluminum differential covers are designed to not only protect your ring & pinion, they are designed to help cool your gear oil for prolonged bearing life. Made from high strength heat treated aluminum to withstand direct hits, these covers help protect your investment while adding a distinct look to your vehicle.
• California Residents: WARNING

G2 Axle & Gear Dana 30 JK Ring and Pinion Sets

From $131.99

• Dana 30 JK Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

G2 Axle & Gear Dana 30 Ring and Pinion Sets

From $109.99

• Dana 30 Ring and Pinion Sets
• Forged from 8620 steel
• Tight tolerances for easy setup and to maintain OE noise level specs
• Lapped to give the mating surface a smooth finish to reduce friction that can lead to noise and excessive wear
• California Residents: WARNING

Eaton E-Locker Differentials

From $1,299.99

• Electronically-selectable differential for on-demand traction
• Provides 100% axle lock on demand via on/off switch
• Switch is dash-mountable making it easier to reach
• Most reliable on-demand differential on the market
• Allows user to send all available torque to drive wheels
• Provides maximum traction to tackle the most challenging terrain
• Beefy, forged gears for added strength and reliability
• Works in both forward and reverse
• Time-tested performance and durability
• New wiring harness designed for straightforward installation
• Minimal wiring provides a clean, snag-free installation
• California Residents: WARNING

Dana Spicer Dana 44 Front Axle Assemblies

From $1,485.99

• Genuine Spicers gears
• Thick axle tubes for improved strength
• Redesigned and thicker brackets
• Spicer chromoly axle shafts
• Performance differential cover and Spicer performance gasket
• Increased gross axle weight rating
• California Residents: WARNING

G2 Axle & Gear Birfield Axles

From $99.99

• G2's high strength axle shafts are engineered to withstand the added load of high torque applications and to remedy the common faults found with factory shafts. Forged from high grade alloy steel and heat treated to exceed OEM specifications, these axles are designed for extended service life. Added features such as Big Spline options, rolled splines and use of better materials allow you to confidently run larger tires without the risk of failure.
• California Residents: WARNING

G2 Axle & Gear Minor Ring and Pinion Installation Kits

From $92.99

• G2 Axle & Gear Minor Installation Kits include everything you need for a ring & pinion rebuild
• High-quality Timkin ball bearings
• Optimized shim kit for proper spacing
• Replacement pinion nut
• Crush sleeve
• Pinion seal
• Ring gear bolts
• Silicone sealer
• Genuine Loctite thread locking compound
• Gear marking compound
• California Residents: WARNING

Power Trax Lock-Right Lockers

From $488.99

• The original locking differential
• Outstanding value
• Completely replaces stock differential
• Reuses your vehicle's existing carrier
• Includes Zytanium cross shaft
• Fully automatic operation for ease-of-use
• Case not required
• Does not alter ring and pinion
• Works for both front or rear or in tandem
• Thorougly tested to provide solid, reliable performance
• Bolt-in installation
• No gear resetting or shimming required
• Available in 22, 26, 30 and 31 spline configurations
• California Residents: WARNING

Auburn Gear ECTED Max Differentials

From $1,541.99

• Engineered to switch from Limited Slip to full Locking Differential on the fly
• Smooth engagement makes it well-suited for street use
• Activated via in-vehicle switch
• Gearing manufactured from aircraft quality 9310 billet steel
• Heat treated for additional strength
• Can be used with or without lockout hubs
• No additional parts required for installation
• 1-year replacement warranty
• California Residents: WARNING

RCV Ultimate CV Axle Shafts

From $1,349.95

• Twice as strong as OEM Jeep axles
• Eliminates U-joint binding to allow smooth transfer power to the ground
• Low maintenance and operate with a smoothness you can feel
• "No Questions Asked" limited lifetime warranty
• California Residents: WARNING

Dynatrac Pro Steer Ball Joints

From $661.00

• Stronger than OEM ball joints
• Geaseable on the vehicle
• Rebuildable without special tools
• Improves vehicle handling
• Teflon coat internal wear points
• California Residents: WARNING

Dana Spicer Ball Joint Kits

From $131.99

• Sold In Pairs
• 1 Upper Ball Joint
• 1 Lower Ball Joint
• California Residents: WARNING

Alloy USA Heavy-Duty Ball Joint Kits

From $229.99

• Includes 2 upper and 2 lower ball joints
• High strength steel socket inner insert
• Made of 4140 Chromolly steel
• California Residents: WARNING

Lube Locker Differential Gaskets

From $29.99

• Throw your RTV away! Tired of the mess that silicone sealant leaves behind? Ever had to wail on the diff cover with a hammer to break it free? Lube Locker, gets the job done quicker with less hassle and mess. These gaskets are designed with a steel core that is rubber coat and have Lube Locker's signature full perimeter elastomer beading on BOTH sides. The result is a gasket that will not split or extrude during installation and has superior torque retention. There is no set up time because installation is dry with no sealant needed
• California Residents: WARNING

Dana Spicer Ring and Pinion Kits

From $365.99

• Fits most 1996 and earlier standard rotation front and rear axles
• For use with 3.54 and down carrier
• Requires D/S706016X differential bearing kit to complete installation
• Includes pinion bearings
• Includes pinion seal
• Includes pinion shim pack
• Includes pinion preload shim pack or crush sleeve
• Includes pinion nut
• Includes differential shim pack
• Includes ring gear bolts
• Superior Metallurgy ensures more consistent, higher quality gears
• Hobbed and shaved gearing provides optimal mating to minimize stress and maximize life
• Precision heat-treating and shot-peening delivers consistent quality
• California Residents: WARNING

Power Trax No-Slip Traction Systems

From $338.99

• The Powertrax No-Slip Traction Systems are the latest design in traction-adding differential technology. They combine the smooth operation of a limited-slip differential with the traction performance of a locking differential. A precise synchronization mechanism eliminates the ratcheting sounds typical of other locking differentials. Installation is simple because no ring and pinion setup is required. In addition, no special tools or oils are needed.
• California Residents: WARNING

Stage 8 Locking Spindle Nut Kit

From $100.99

• Stage 8 Locking Systems offers the opportunity to restore the dependability of Dana 44 and Dana 60 front assemblies with these Stage 8 X-Lock locking spindle nuts. These patented locking spindle nuts are guaranteed to never loosen, even under the most extreme conditions. The X-Locks were developed for the rugged life of competitive off-road vehicles. Any vehicle with Dana 44 and Dana 60 front assemblies can be retrofitted with the X-Locks for dependable, long service life and save thousands in repair dollars. Stage 8 X-Locks are laser-cut from 4130 steel and can be easily installed without any special tools. X-Locks are heat-treated and through-hardened and will maintain bearing preload value. They can be easily locked within 1/2 degree of any position.
• California Residents: WARNING

Ten Factory Front Axle Tube Seals

From $70.99

• These TEN Factory Axle Tube Seals are a new updated design of a product that helps to keep mud and debris out of your front model 30/44 axle tubes, these TEN Factory Axle Tube Seals are available in Black, Red and Silver. Will Not Work With Passenger Side Vacuum Disconnect Two Piece Axle Shaft
• California Residents: WARNING